Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Main (https://www.quiltingboard.com/main-f1/)
-   -   Ok, I want to marry Elmer!!! (https://www.quiltingboard.com/main-f1/ok-i-want-marry-elmer-t216039.html)

bigredharley 03-10-2013 03:23 PM

Ok, I want to marry Elmer!!!
 
for his glue of course. I did my first glue attempt today, probably used way too much, but everything matched up, nothing stretched out of shape, it moved along really fast and I finally finished the pinwheel quilt top.

Now to decide about machine quilting - I'm learning disabled when it comes to FMQ, so thinking I need to send it out to be LA quilted (it's 98" x 99"). $200 seems so much to spend for that though (it's for my DD). Anyone know of anywhere less expensive than Missouri Quilt?

Buckeye Rose 03-10-2013 03:48 PM

If the quilter is providing the batting, then the price is pretty reasonable, at least for my area.

wlachance 03-10-2013 03:54 PM

Blessings Quilt Shop in Ofallon, MO does beautiful work. Their telephone number is 636)474-3007.

EasyPeezy 03-10-2013 04:02 PM

Why not quilt it yourself? I don't FMQ either but I finish all my quilts myself.
You don't have to limit yourself to SID. There are all kinds of continuous line quilting
that you can do. Here are some ideas.
http://blog.petitdesignco.com/2012/1...-quilting.html
I understand it's a fairly big quilt. Start in the middle and take lots of breaks.

QuiltnNan 03-10-2013 05:01 PM


Originally Posted by EasyPeezy (Post 5919638)
Here are some ideas.
http://blog.petitdesignco.com/2012/1...-quilting.html
I understand it's a fairly big quilt. Start in the middle and take lots of breaks.

this is a great site... thanks for sharing. the only problem is that the blogger used a yellow font, which i just cannot read as there's no contrast with the background.

Belfrybat 03-10-2013 05:13 PM

I haven't tried the glue method yet. Just too chicken, I guess. Look around for a more reasonable longarmer. I think for simple meandering, it shouldn't cost more than a penny cents an inch. Around here, the local quilt shop charges $85.00 for that size quilt which includes pily batting and binding it.

Silver Needle 03-10-2013 05:19 PM

There are people here on the board who long arm quilt. Why not check them out! $.015/sq inch is pretty much the going rate in our area plus the cost of batting. But perhaps we all need to consider lowering our prices? What are the prices you would be willing to pay for over all/edge to edge quilting. LA Quilting sounds expensive but it does take time to properly load a quilt so it is started square and stays square. Are there charges for loading the quilt when you pay .01/sq inch.

EasyPeezy 03-10-2013 05:33 PM


Originally Posted by QuiltnNan (Post 5919752)
this is a great site... thanks for sharing. the only problem is that the blogger used a yellow font, which i just cannot read as there's no contrast with the background.

I agree that yellow is a poor color choice. Does it help if you highlight the yellow parts?

sewingsuz 03-10-2013 06:00 PM

Thank you for the link to the 31 days of using walking foot. I love it.

Originally Posted by EasyPeezy (Post 5919638)
Why not quilt it yourself? I don't FMQ either but I finish all my quilts myself.
You don't have to limit yourself to SID. There are all kinds of continuous line quilting
that you can do. Here are some ideas.
http://blog.petitdesignco.com/2012/1...-quilting.html
I understand it's a fairly big quilt. Start in the middle and take lots of breaks.


mighty 03-11-2013 07:30 AM

I love elmers also!!!! Give FMQ a try I am sure you will do fine!!!

SherriB 03-11-2013 08:12 AM

I have got to try using the Elmer's glue. I may make something small, like a runner, and see how it works. I am taking a 90x90 quilt to a local long arm quilter. It will cost me just over $200 to get it quilted and she is providing the batting also. I usually do my own quilting but I have never made a quilt this big before and don't want to mess it up.

Chicca 03-11-2013 09:32 AM


Originally Posted by EasyPeezy (Post 5919638)
Why not quilt it yourself? I don't FMQ either but I finish all my quilts myself.
You don't have to limit yourself to SID. There are all kinds of continuous line quilting
that you can do. Here are some ideas.
http://blog.petitdesignco.com/2012/1...-quilting.html
I understand it's a fairly big quilt. Start in the middle and take lots of breaks.

I just want to say Thank You for sharing this site!! I have just spent the past hour going through her 31 days and was so inspired. Will be exploring my walking foot on the quilt I am making right now. I just never thought of even trying anything like this.

Jan in VA 03-11-2013 05:33 PM

Wait! Can you baste a quilt - glue/spray/pin/thread - and THEN take it to the LA?? Don't they mount it to their frame in a way that does not require/allow pre-basting??!

Jan in VA

sparkys_mom 03-12-2013 04:30 AM


Originally Posted by Jan in VA (Post 5922156)
Wait! Can you baste a quilt - glue/spray/pin/thread - and THEN take it to the LA?? Don't they mount it to their frame in a way that does not require/allow pre-basting??!

Jan in VA

I've rented a LA a few times and one of the advantages, IMO, is not having to baste the quilt. That said, the setup on the LA can take some time when you aren't well practiced at the process.

sparkys_mom 03-12-2013 04:33 AM


Originally Posted by QuiltnNan (Post 5919752)
this is a great site... thanks for sharing. the only problem is that the blogger used a yellow font, which i just cannot read as there's no contrast with the background.

It is a great site. If you are having trouble reading it, just click through all the links and when you come back they will be a different color. Of course that only works until your browsing history clears but it is a temporary solution, anyway. Now, excuse me while I go make friends with my walking foot guide. :)
Oh, there are also books on this subject. Go to Amazon and just search "straight line quilting" and a couple will come right up. Then I would suggest seeing if your local library has one or both to try before you purchase.

paoberle 03-12-2013 04:45 AM

Check out Happy Crafters. I think the website is happycrafters.net. Their prices are very reasonable. They charge by the design, not the size of the quilt. They have done 3 quilts for me and I will not hesitate to use them again.

Chasing Hawk 03-12-2013 04:49 AM

I have glue basted 3 quilts so far. And I love it!

JaniceP 03-12-2013 05:01 AM


Originally Posted by EasyPeezy (Post 5919638)
Why not quilt it yourself? I don't FMQ either but I finish all my quilts myself.
You don't have to limit yourself to SID. There are all kinds of continuous line quilting
that you can do. Here are some ideas.
http://blog.petitdesignco.com/2012/1...-quilting.html
I understand it's a fairly big quilt. Start in the middle and take lots of breaks.

Thanks for posting this. I like how she does the quilt as you go in the 31 day area. Neat way of doing quilt as you go.

Canada Kate 03-12-2013 05:44 AM


Originally Posted by bigredharley (Post 5919580)
Now to decide about machine quilting - I'm learning disabled when it comes to FMQ, so thinking I need to send it out to be LA quilted (it's 98" x 99"). $200 seems so much to spend for that though (it's for my DD). Anyone know of anywhere less expensive than Missouri Quilt?

To me, this is a great price. I paid $320 to have this king-sized quilt LA'd: http://www.quiltingboard.com/picture...d-t191845.html.

janbland 03-12-2013 05:51 AM

Two cents per inch is the going price at local quilt shops in my area. I've long-armed a couple of tops for other folks and have found those who are as picky as I am about pressing seams and those who are not. I spent two days pressing seams on one top to make them lie flat before I could actually quilt it, plus the borders were ruffled. I only quilted it as a favor to my neighbor as it was for her daughter. If I hadn't been fixing this top, I could have been piecing my own quilt.

Sierra 03-12-2013 06:14 AM

I suspect most of us quilt our own quilts, and most of those are NOT FMQ! I have a curved line that I like to use. Sometimes I do a cross hatch, sometimes shadow (never the ditch, that's too hard). The last one I tried I didn't want to interfere with the design of the quilt (and it was 2 sided) was a mocking of the ties that my mother used to do... It was a lot of 5" scrapy squares (mocking some microscope photos) and I started in the center of the a four corner and went 5 stitches out and then 10 back and 5 forward, all in a straight line; then turned my fabric 90 degrees and repeated it, so that every corner had a very good anchor. Later my 15 year old g-son was making a quilt for his "other" grandfather who is wheelchair bound and the design was unique and 2 sided. We dithered around trying to figure out how to quilt it and he decided he wanted to use the "X" on his quilt. It allowed him to fudge a bit here and there a pinch so that the X never cut into the pattern in an awkward place.

My all time favorite has been a long undulating line for which I made a template. I found the link shared by easy peasy outstanding! It opens doors for me! Thanks Eesy Peesy!

mjhaess 03-12-2013 07:02 AM


Originally Posted by bigredharley (Post 5919580)
for his glue of course. I did my first glue attempt today, probably used way too much, but everything matched up, nothing stretched out of shape, it moved along really fast and I finally finished the pinwheel quilt top.

Now to decide about machine quilting - I'm learning disabled when it comes to FMQ, so thinking I need to send it out to be LA quilted (it's 98" x 99"). $200 seems so much to spend for that though (it's for my DD). Anyone know of anywhere less expensive than Missouri Quilt?

WOW... that sounds like a lot of money. I am not sure what the going rate is but I can get a queen size quilt done using her batting for about 125 dollars.....I had a king done and it cost me 137 dollars.....Maybe it is just in this area.....

brendadawg 03-12-2013 08:43 AM

Missouri Quilt Co sure does beautiful work. They did a couple for me, just small ones, and I thought the price was quite reasonable.

IBQLTN 03-12-2013 10:12 AM


Originally Posted by EasyPeezy (Post 5919638)
Why not quilt it yourself? I don't FMQ either but I finish all my quilts myself.
You don't have to limit yourself to SID. There are all kinds of continuous line quilting
that you can do. Here are some ideas.
http://blog.petitdesignco.com/2012/1...-quilting.html
I understand it's a fairly big quilt. Start in the middle and take lots of breaks.

Wow, what a totally kool site! I may qult more of my own in the future ... sure will save some moola!

IBQLTN 03-12-2013 10:15 AM


Originally Posted by EasyPeezy (Post 5919808)
I agree that yellow is a poor color choice. Does it help if you highlight the yellow parts?

It is difficult to read but once you click on the desired day the instructions are in black font.

grandme26 03-12-2013 10:20 AM

At my LQS you can rent their LA foruy a very reasonable rate. They also set up the LA and I buy the batting from them. It takes one to four hours, for me to do a quilt, depending on the size. It also has a light that you use to follow a FMQ pattern so there is no thinking todo. It is fun and easy and you do not have to follow the lines on the pattern perfectly, that is what makes it fun and easy. I have to admit the LQS I use is SPECIAL :o:thumbup: I have done 3 there this past year and plan on doing several more this year. They are also having a FMQ class for your home sewing machine so will be taking that is a couple of weeks. I now have a sewing machine that is large enough to try it.

susan... 03-12-2013 11:49 AM

wow thanks for the link 31 days of walking foot quilting

Quilts&Angie 03-12-2013 01:27 PM

Blessing Quit Shop in O'Fallon, MO is closing, their last day is this Saturday! :(

w7sue 03-12-2013 03:19 PM

I am new to longarming, but a fellow longarmer charges 1 cent per square inch for charity quilts - haven't asked what she charges for regular stuff - she does beautiful work - I can only hope to get as good - I just finished my own king-size quilt (100 x 120) and it took almost four hours of sewing time and nine bobbins of thread on the longarm (not counting loading, advancing, etc.). I did an edge-to-edge pantograph on it. 12,000 square inches = $120 (1 cent) and $180 (1.5 cent). If I charged 1 cent then I would be making $30/hour and that seems like pretty good wages to me ...

twinkie 03-12-2013 03:56 PM

I would try it myself. Good Luck

1screech 03-12-2013 08:14 PM

I use Butler Country Crafts. I mail them to her in Montana, insured of course. She is very reasonable and I have never been disappointed in her work. You can contact her online. She provides the batting. She has quilted about 15 quilts for me and many more for family and friends. Please send private email if any questions so we don't bore the group. No relation to her, I live in Fl. She has been very accommodating to me and my family/friends for about the last 5-6 years. I hope I don't flood her with requests so she doesn't have time to quilt mine.

sewbizgirl 03-12-2013 08:22 PM


Originally Posted by QuiltnNan (Post 5919752)
this is a great site... thanks for sharing. the only problem is that the blogger used a yellow font, which i just cannot read as there's no contrast with the background.

I noticed if you put your cursor on the yellow words they turn green, and are very easy to see then.

WHO IN THE WORLD chooses yellow lettering on white?!

Painiacs 03-12-2013 09:34 PM

If you cant find a la pm me ill give you the name of mine. she charges by the hr and fast so is very reasonable! Ppl all over send their quits to her!

2blackcats 03-13-2013 08:02 AM


Originally Posted by QuiltnNan (Post 5919752)
this is a great site... thanks for sharing. the only problem is that the blogger used a yellow font, which i just cannot read as there's no contrast with the background.

As soon as you click on an example, the yellow turns to a readable color. This is a great sight.

Teeler 03-13-2013 08:09 AM

<div style="background-color:blue">
FYI- for those who have trouble with yellow or other light colored and small fonts...Use your mouse to highlight each part you want to read. It changes the whole page to be MUCH more ledgible! </div>


For small fonts, use your Ctrl button and scroll up to make the page bigger.

oldtisme 03-13-2013 06:35 PM

TY for the link EasyP..I AM going to get me a walking foot and do the detailing on my own on my very 1st quilt...if I ever get to that point :)


All times are GMT -8. The time now is 02:33 PM.