Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Main (https://www.quiltingboard.com/main-f1/)
-   -   Piecing the back (https://www.quiltingboard.com/main-f1/piecing-back-t77625.html)

Annz 11-21-2010 05:03 PM

I really don't mind a seam in the middle but the John Flynn method is interesting

jitkaau 11-21-2010 07:21 PM

I generally get fabric that is wider than the top and use that for backing. It is cheaper by at least $10 per metre, and the more expensive material is saved for another top.

ktmo815 11-22-2010 07:03 AM

What is WOF, please?

nance-ell 11-22-2010 07:12 AM


Originally Posted by ktmo815
What is WOF, please?

WOF = width of fabric (typically 45 inches)

ktmo815 11-22-2010 07:18 AM

Thank you

newbiequilter 11-22-2010 08:12 AM

I try to save some of the fabric(s) from the top to incorporate into the back - usually as strips. It makes the back more interesting and often times turns out like another quilt. I agree with everyone - great fabric for backing.

Lucydog 11-22-2010 09:51 AM

I too agree with ckcowl and prairie queen. However if your long armer has a 12' frame she can load it either top to bottom or side to side whichever way accomodates the seam.

nance-ell 11-22-2010 12:31 PM

I considered putting some of the fabric from the front on the back, but finally decided to keep the back all one fabric. It's will still be reversible and I love the fabric! Thanks for all the input. I have learned so much from this board. You are all awesome!

Dawneda 11-22-2010 02:42 PM

Do it the way u think best. Love the fabric,very pretty.

Gerbie 11-22-2010 09:49 PM

You might want to watch this video, I think it's great for sandwiching the quilt. I had never thought of doing this, like Sharon does. I have always taped and pinned. Since this is your first quilt so to speak, you might want to start out using this method to save problems later down the road on others. Gerbie
http://www.youtube.com/watch?v=bhwNylePFAA

patdesign 11-23-2010 02:15 PM


Originally Posted by nance-ell
So, I've been reading the threads about how to piece the back. My quilt top is 65 x 65. I bought 4 yards of fabric and cut it in half. I was going to sew them together and then put it on the back with the WOF on one side and the balance to finish it off. My thinking was that would use 45 WOF plus 30 and I would be left with a 15 inch strip for future use. I was reading where a lot of folks use the 45 WOF down the middle and cut the 2nd piece in half for either side. Either way avoids a seam down the middle. Is it really going to make that much difference which way I do it? This is the only my 2nd quilt top and I have yet to try to complete the first one, so essentially, this is my first quilt. I don't want to be discouraged when I'm finished as I'm really hoping to use and enjoy this quilt. I want to make a good choice from the experience of all the wonderful folks on the board. Thanks!

The professional way is to put the center panel full width thru the center of the quilt, and split one half for the two sides left and right of center. If you notice wide bedspreads that are not ultra wide fabric you will see they too use this process. :D

Virginia 11-23-2010 07:23 PM

Right you are.........

quilting cat 11-23-2010 07:25 PM

I have found that it quilts flatter if the lengthwise grain matches the quilt.

fleurdelisquilts.com 11-23-2010 07:47 PM

I'm stressed just reading this thread. Here's the thing: if it's a beginning quilt, chances are it won't last for 100+ years. That isn't meant to hurt anyone's feelings, it's just how it is. My first quilts were far from perfect in every way. The very first one I made lived through only 15 years of abuse from my boys, not bad in my opinion.

The point is that while you still consider yourself a beginner, you can't expect your quilts to last forever, you're learning. So do the best you can at every stage, but don't stress yourself. When you're a better quilter, you can fret about the things that will mean the difference of your quilt lasting for years after you're gone. I started fretting about that after I won a ribbon in a local show. That event was my way of knowing that I'd improved to the point that I was on par with other quilters. And it meant that my quilts were perhaps valuable enough that I'd want them to last for much longer. That's when I started to worry about where backing seams go, which batting was better, etc.

But this is just my opinion and my way of judging the value of MY work. You need to set your own standards for your quilting.

nance-ell 11-26-2010 05:51 AM


Originally Posted by fleurdelisquilts.com
I'm stressed just reading this thread. Here's the thing: if it's a beginning quilt, chances are it won't last for 100+ years. That isn't meant to hurt anyone's feelings, it's just how it is. My first quilts were far from perfect in every way. The very first one I made lived through only 15 years of abuse from my boys, not bad in my opinion.

The point is that while you still consider yourself a beginner, you can't expect your quilts to last forever, you're learning. So do the best you can at every stage, but don't stress yourself. When you're a better quilter, you can fret about the things that will mean the difference of your quilt lasting for years after you're gone. I started fretting about that after I won a ribbon in a local show. That event was my way of knowing that I'd improved to the point that I was on par with other quilters. And it meant that my quilts were perhaps valuable enough that I'd want them to last for much longer. That's when I started to worry about where backing seams go, which batting was better, etc.

But this is just my opinion and my way of judging the value of MY work. You need to set your own standards for your quilting.

Well, I'm not expecting perfection, though I am a perfectionist. I don't expect this quilt to last forever. However, for the money and time I've already invested, I do want it to be something I can enjoy and be proud of. I am learning a lot as I go.

patdesign 11-27-2010 06:56 AM


Originally Posted by fleurdelisquilts.com
I'm stressed just reading this thread. Here's the thing: if it's a beginning quilt, chances are it won't last for 100+ years. That isn't meant to hurt anyone's feelings, it's just how it is. My first quilts were far from perfect in every way. The very first one I made lived through only 15 years of abuse from my boys, not bad in my opinion.

The point is that while you still consider yourself a beginner, you can't expect your quilts to last forever, you're learning. So do the best you can at every stage, but don't stress yourself. When you're a better quilter, you can fret about the things that will mean the difference of your quilt lasting for years after you're gone. I started fretting about that after I won a ribbon in a local show. That event was my way of knowing that I'd improved to the point that I was on par with other quilters. And it meant that my quilts were perhaps valuable enough that I'd want them to last for much longer. That's when I started to worry about where backing seams go, which batting was better, etc.

But this is just my opinion and my way of judging the value of MY work. You need to set your own standards for your quilting.

Sorry you were stressed, however, it helps a beginner just as much as a pro to know the proper way to do things, then it is up to them to decide whether they want to do this or that. If we aren't exposed to the right techniques early on we will just make things harder for ourselves. So hooray for this board and all the willing posters who make it a great learning tool. :-)

Panther Creek Quilting 11-27-2010 08:01 AM


Originally Posted by nance-ell
Thanks for the replies! That diagonal looks interesting and I may try that sometime. Not sure I'm up to it for this one. I just added a picture of the background fabric. I don't think it is going to be that noticeable to have one seam off center. I thought the quilt top was the hard part with all the decisions to make! lol


I had to laugh. Yes there are as many ways to bak quilt and bind a quilt as there are patterns for the fronts, LOL!


All times are GMT -8. The time now is 02:38 PM.