|
Originally Posted by athomenow
(Post 6724754)
If you do a QAYG you can do any size you want very easily. I love this method and use it a lot. But you can do it the other way, just work slowly from the center out and try to have it lay flat as possible and not drag over the sides of the table you're using.
|
Quilt it in sections. Only sew together a certain number of rows that is comfortable to put through your machine, and then when the quilting is finished, sew them all together. I've done it several times, and it works very, very well.
|
When ever I make a quilt I divide the pattern into rows. Take the first one or two rows (depending on width of row) and after assembling I do the qayg method. I will layer top batting and backing and quilt. It is very manageable this way. Then I will take the next "row" and place face to face on top and backing face to face. Stitch the rows together. Fold the out and place a strip of batting between and quilt that section. Continue thru last row. At this point you have a completely quilted quilt. If you are going to put boarders then do the same. Top and back, stitch, fold out and place batting between, then quilt. Treat the boarders same as rows. With this process you don't have to stuff the entire quilt in the harp of your machine. It is always to the left of the machine. When you are done assembling all you have left to do is binding. Most but not all patterns can be broken down into either horizontal or vertical rows for this process.
|
If you don't have a "FMQ" foot try a darning foot. They are pretty much the same thing. Most machines come with darning feet or quilting feet, one or the other.
|
I've never thought to use a double needle to quilt. What an awesome idea tapper! Love this board.
|
Originally Posted by knitwitrosie
(Post 6724090)
I know this has probably been asked a ZILLION times, but what's the largest you've quilted on a home, non-quilting machine?
The reason why I ask is I really want to make quilts for my Aunts for Christmas, however paying someone to do the quilting for me is a bit out of the question as it will severely put me over budget. Originally, my sister's MIL offered to do any quilting of mine for cheap/free when she first got her long-arm machine. Things have changed for whatever reason and now the cost to have two lap quilts done is way out of my budget. The quilts are approx 60" x 76" each, and I'm probably going to just do SITD since I don't have a FMQ foot for my machine. I've got a Janome Sewist 525s as my primary sewing machine, but I do also have a Brother PC-6500 Embroidery/Sewing Combo Unit that has a slightly larger throat (but not by much) but I don't have a walking foot for that one. I guess I'm just looking to see if ya'll think it's possible for me to quilt these suckers on my own without having to send it out to be done. |
If you really want to quilt these, the right tools are very important!! The purchase of a free motion foot is not expensive and while the even feed foot is more expensive, both will make your job much easier. If you don't want to purchase either of these, I would suggest tying them, because when quilting without them, there is a very good chance you won't be happy with the results.
|
Why not use the embroidery function on your Brother to quilt it? There are lots of quilting patterns available.
|
I have the Janome 6600 also and have quilted a large queen. It's a lot of quilt to work with but very doable. It does have a 9" throat and those extra 3" really help. For me the hardest part is basting a large quilt together but once I have it that far I enjoy the rest of the process. I took a couple of the FMQ classes on Craftsy.com and that helped me a lot - they give you hints on maneuvering a quilt while FMQ on a regular home machine. Good luck.
|
Buy a FMF for your machine! It will not go to waste since you will then be able to quilt many other things. Also I like meandering for my FMQ. It can be done fairly quilckly on your quilt- just far enought apart as recommended by your batting manufacturer. Also I use invisible thread on top when doing SID so you can not see my uneven stitches as easily. On the back I use thread that matches the backing. Good luck!!!! You can do it!!!!!
|
2 Attachment(s)
I do all of my quilting with my home machines, a Bernina 930 and1031 and a Pfaff 1222E They have a 7", 6.5",8" throat space. I don't roll up the quilt, its too bulky that way; accordion pleat it instead.
|
Originally Posted by knitwitrosie
(Post 6724090)
I know this has probably been asked a ZILLION times, but what's the largest you've quilted on a home, non-quilting machine?
The reason why I ask is I really want to make quilts for my Aunts for Christmas, however paying someone to do the quilting for me is a bit out of the question as it will severely put me over budget. Originally, my sister's MIL offered to do any quilting of mine for cheap/free when she first got her long-arm machine. Things have changed for whatever reason and now the cost to have two lap quilts done is way out of my budget. The quilts are approx 60" x 76" each, and I'm probably going to just do SITD since I don't have a FMQ foot for my machine. I've got a Janome Sewist 525s as my primary sewing machine, but I do also have a Brother PC-6500 Embroidery/Sewing Combo Unit that has a slightly larger throat (but not by much) but I don't have a walking foot for that one. I guess I'm just looking to see if ya'll think it's possible for me to quilt these suckers on my own without having to send it out to be done. |
I've done 3 quilts that were king size - 120 x 120 - I don't even give it a 2nd thought anymore. Each one seems easier the more I do.
|
I quilted a Queen size for my son, using my Bernina 1230, also a double one for my mom, using the same machine. Not easy, but quite do-able. I had to put the machine on the end of a dining room table, so the table could take the drag off things, and then I stippled areas in various sizes. Best to treat it in quarters, and start from the center and move out over each quadrant. Rolling and smushing it under the head of the machine best as you can. Once the center is done, things ease up and are more manageable. Biggest issue, once the weight of the quilt was managed, was the small size bobbin that home machines have. Lotta refills, so fill a whole bunch of bobbins ahead of time, get some good lighting, a good supportive chair, and don't forget to get up and move every 15 minutes or so, and to change your focal length by looking at mid/far away things to give your eyes a break. Eye headaches are the worst!
|
Lap sized quilts are no problem to quilt on a DSM. I've done king sized quilts on my DSM. Both patterns that you've chosen would be great for SITD. I'd follow the diagonal lines in the one, and the sashing lines in the other. Beautiful qulits!
|
I have a 6 1/2" throat on my DSM and have done up to an 80" x 80" using a cross hatch pattern (diagonal lines from corner to corner in both directions. I used the widest blue painters tape (approx 1 3/4") and also pinned it down the middle, then stitched down both sides. If you use temporary spray adhesive or Elmer's school glue to adhere the front, batt, and backing it will not wrinkle on the back. I just finished two twin size, 66 x 101, doing stitch in the ditch, AND FMQing in the blocks. It was very doable. I did the stitching in the ditch first to stabilize the entire quilt, then FMQed the blocks around the middle section so the majority of the quilt was laying to the left. Then I attempted the center (thinking I may have to do another design) but it wasn't bad at all. Just binding them now. Good luck. The cross hatching and SITD definitely have to be done with a walking foot !
|
I have done free motion quilting on 3 king size quilts. A real chore, but you just take your time and start in the middle and work around. I have a Juki TL98Q. Good luck!
|
Originally Posted by purplefiend
(Post 6725254)
I do all of my quilting with my home machines, a Bernina 930 and1031 and a Pfaff 1222E They have a 7", 6.5",8" throat space. I don't roll up the quilt, its too bulky that way; accordion pleat it instead.
|
I have found SID is not easy. I prefer echo stitching along both sides the ditch at about 1/4 inch. If hubby is willing to look at (new) used machines for you, would he be willing to go with a walking foot? Less expensive and it does male a difference in the quilting.
|
please get yourself a walking foot. it will save you so much time, accuracy and craziness! Also, I saw a great tip for 'working' the quilt thru the foot. Instead of the gloves, I use a small piece of rubber shelf liner. On a class, the quilt instructor used it. It is great because you just sit your hand on it and it grips very well. A lot quicker than putting on and taking off gloves all day.
|
I recently bought a Janome sewing machine, new, and one of the extras for the buying the machine was a "walking foot" if that is the one that is big and bulky when you hold it in your hand. Find out if it will work on your machine, and if it will, you can have it. My quilting machine is a Gammill Classic, so for me the quilting foot for my Janome will never be used. PM me with your address and I'll put it in the mail to you. Please don't ask me to take a pic of it for you. I have a camera, and could take the pic, but can't figure out how to post it.....
|
Use the foloowing tips-1) Use spray basting- makes quilt lighter and since it "glued" together the sandwich will not move aso you can start on any side. 2) use invisible thread for SID -you can not see stitch as easily so not see crooked lines 3) be sure entire quilt is suported well - do not let the quilt hang down since the weight of the quilt will make moving quilt harder and make the SID crooked.
|
22 years ago I quilting a king size quilt on my little singer sewing machine, using a walking foot. I used polyester batting and it was huge. My three year old daughter would stand beside me and help push the rolled up quilt through the machine. You really don't need a three year old help you but she wanted to. The quilt is still on the bed. Go for it!
|
Check out QAYG , there are a number of ways to do it. If you don't want any hand sewing
http://quilting.wonderhowto.com/how-...achine-423636/ |
Originally Posted by oldtnquiltinglady
(Post 6725547)
I recently bought a Janome sewing machine, new, and one of the extras for the buying the machine was a "walking foot" if that is the one that is big and bulky when you hold it in your hand. Find out if it will work on your machine, and if it will, you can have it. My quilting machine is a Gammill Classic, so for me the quilting foot for my Janome will never be used. PM me with your address and I'll put it in the mail to you. Please don't ask me to take a pic of it for you. I have a camera, and could take the pic, but can't figure out how to post it.....
|
THANK YOU ALL AGAIN for the wonderful tips and support!! I finally have the confidence to try and tackle doing it! Just placed my order this morning on Missouri Star for all my materials and can't wait to get started!
|
Originally Posted by dunster
(Post 6724183)
One possibility is to quilt in sections. I did this until I bought a longarm. I used Marti Michell's book, Machine Quilting in Sections, to learn various ways to do it. I quilted an oversize king, 118x188, that way.
|
I just did a queen size on my Featherweight. The batting was Warm and Natural, so wasn't too bulky. I just rolled it up, and it worked just fine.
|
Quilts that size are definitely doable, especially simple quilting. I quilted 2 king size quilts on my DSM as well as dozens of queen size quilts, lap and baby quilts. I think I would invest in a walking foot for your machine, as it is well worth the price, as it will save you lots of aggravation when quilting. You can do it, just take your time and it will all work out.
|
I have quilted numerous quilts on my DSM. A few suggestions to add to what you already have gotten. If you decide to SITD, use a serpentine, herringbone or some other interesting stitch instead of a straight stitch. It adds interest to the quilt and isn't as noticeable if you miss the ditch. There is a book called 'Mile-a-Minute quilts' by Sharon Hultgren that is very similar to QAYG. Quilts are made in 20" wide sections and then covered with a sashing type binding. It would lend itself well to your pattern as it has the lattice type look to it. Then you would only have that 20" width by your length section to fit under your machine.
If you don't go that route, use your walking foot to sew a long curved line from corner to corner and then repeat it at whatever inch intervals you would like. You could even go the opposite direction and create a curvy crosshatch. Your pattern would be fairly simple to use a grid-like pattern to quilt and with W&N the quilting distance is about 5-10". I hope this helps and good luck with your quilts. |
Funny you should ask. I'm now in the process of making a king quilt on my Janome 9000. I'm using the quilt-as-you-go method as seen on a u/t from The Gourmet Quilter (Tip #74). I'm happy with the way it's coming together. It's a scrappy and I'm piecing and quilting one block at a time, then sewing the blocks together into strips/rows. When the rows are ready to be sewn together all I need to do is add the binding. All done!! Of course, using the walking foot is a must.
|
I have quilted all sizes up to a king size quilt on my home machine before I got my long arm. I didn't have a walking foot yet either. Oddly enough, I got the walking foot for that machine close to the same time I bought the long arm. I just rolled the quilt from the outside edges in toward the center and quilted my way out.
|
I have done queen and king sized quilts on my DM, it isn't all that hard once you learn how to puddle your fabric. Like anything anything else you will get better with pactice, but it can be done and is very rewarding
|
I have quilted a couple of queen size on my Bernina 430. It is pretty tight, but doable. I used a stencil pattern-it seemed easier to have something to follow in such a tight space.
|
Why not do Quilt As You Go? You could google that method and find the right one for you. Hope this helps. I quilt on my home machine too as can't afford to pay a long armer.
|
sewmama, you have my dream machine that I'm STILL saving for, it might take me years but I WILL have one :D
|
Sew Krazy Girl I am doing the exact same thing, putting boarders on now, it's time consuming but it's turning out good I'm doing a queen size on my DMS, just taking a break from cutting the 1 & 2" strips.
|
I use the QAYG......Look up Ditter 43 . 8-22-10. I love making a quilt this way. You don't have all that bulk. I just finished one for a Graduation Gift. Plus, when it's all together, you just put on binding and it's done!!
best of luck |
I am working on a twin size and I'm doing it in stages. I take my dsm out of its cabinet and put it on my dining table so I have a large enough area for the quilt. When I have to stop I put my machine back, and take the quilt off the table. Then get it out again next time I quilt. I had read somewhere to also take breaks so as to not over heat the machine.
|
This is a good class on Craftsy: Quilting Big Projects on a Small Machine by Ann Petersen.
|
| All times are GMT -8. The time now is 02:43 AM. |