Sewing binding on by machine ??s
 

I have sewn my binding to the back of my quilt and need to sew it down to the front now. When I did this before with a straight stitch it looked great from the front, but there was a distinct line on the back. Those who do this often, do you recommend a decorative stitch? I thought of a serpentine but was unsure about having part of the serpentine off the binding if you know what I mean. I'm frustrated because our computer just died and I'm using my cell phone. Otherwise I could search and look at pictures. Thanks for any suggestions!

When I'm being careful, I machine sew to the back and then I glue-baste to the front, making sure that the edge of the binding lines up on the front and back. (I poke a needle through from the back every now and then, right below the binding, to help me make sure I'm exactly lined up.) That way when I machine sew the front, the back seam ends up in the right spot on the back binding too. Usually I just straight stitch but sometimes I use the blanket stitch. Or I zigzag if it's a dog blanket.

More often, though, I just go for it and let there be a line on the back and don't worry about it. MOST of my quilts are for gifts to non-quilters and I've never had anybody notice the line on the back, much less comment on it. I don't mind it on quilts I make for myself either. But if you're making something for a show or if you're just less of a slob than I am (lol), try the glue. (Elmer's WASHABLE white school glue is what I use.)

I like to hand stitch mine - it gives me one last chance to look at the quilt and think about who is getting it.

Most people who sew the binding to the back turn it and use a decorative stitch
on the front. Personally, I prefer to stitch to the front, turn, glue, press then SID
on the front while catching the binding at the back. Takes some practice but
I think I'm getting pretty good at it now.

I prefer a serpentine as it is much more forgiving than straight stitching. I have done it with the serpentine half on/half off the binding and also with the serpentine completely on the binding. I think I prefer the latter. The left side of the serpentine gets close enough to the edge that there is no risk of the binding edge turning up.

Best thing to do is experiment with the serpentine settings until you get a look that you like, then prepare a sample quilt edge and try out different placements on the sample. This will tell you pretty quickly what you like best.

Edit: I have tried decorative stitches other than the serpentine, but the only ones that are equally forgiving are those that do not have a center line. My feather stitch, for example, has a center line in addition to left and right stitches. This makes it as difficult to do as straight line stitching. If you have a machine that does non-centered decorative stitches you might want to try a few out. The other thing I found with decorative stitches (other than the serpentine) is that they can take a lot more thread and a lot more time to sew.

I've pinned the binding tightly around the front and used a decorative stitch (waves, serpentines, arcs) to sew the binding down. That way it is not noticed as much when it is off - I call it a design "feature."

If you use thread to match the top and the bottom fabric, you can get away with using the straight stitch. Blending thread won't be as noticeable.

I use straight stitch... I always sew the binding to the FRONT of the quilt, and then turn it to the back and pin pin pin... I go around the edge, pinning right at the ditch on the front where the stitching will be. Then I peek around back and see where that pin landed on the back of the binding. If it's too deep or two shallow, I adjust so that stitch in the ditch will hit perfectly on the edge of the back binding. Lots and lots of pins. My fingers 'know' by now how much to turn and pin, and I don't make too many adjustments.

I never use glue on a quilt-- UGH.

When I sew, I sew slowly and pull the front binding away so that I can snug my sts up into the ditch. Then when the binding relaxes it covers it and is invisible from the front. My aim is to catch just the edge on the back, and not too much. If I have missed any spots I go back and re-do those areas. I usually have a couple...

I iron my binding when I have sewn it to the back and then when I fold it over to the front. Then I choose a stitch I like to do the sewing from the front. I have used school glue but don't anymore. The ironing seems to be enough.

I do have arthritis in my hands is this is the easiest way for me to do it.

I used a decorative stitch on this table runner. Did it on a large quilt too but can't find a photo.