Originally Posted by Prism99
Originally Posted by quiltinggrandmaca
When using the spray for basting do you still have to tape down the backing before you put the batting and the top together?
I smooth the batting out on a large flat sheet on the floor (to catch any overspray), then smooth the backing fabric out on top of the batting. When it is the way I want it, I fold back the fabric so the top half of the batting is exposed, spray the batting, then smooth the fabric back in place. Then I fold up the bottom half of the fabric and repeat the process. I flip the quilt sandwich over so the other side of the batting is up and repeat the whole process with the top. That's it, except for tossing the large flat sheet into the laundry basket. I would not use a 5-year-old can of basting spray. You don't know what chemical changes may have taken place over time. I recommend buying a new can of 505 basting spray. What kind of batting are you planning to use? Nobody has problems with cotton batting, or 80/20 batting. Some people have problems getting polyester batting to adhere; however, that may be due to the brand of basting spray being used. I don't think anyone has reported a problem with polyester batting when they use 505. Do it, you will love the process. |
Originally Posted by kasmitty1
I love 505. I've tried another brand, and it gunked up my needle really bad. I'll stick (no pun intended) with 505. :)
ali |
I use spray baste all the time and I sandwich my quilts on my design wall. You don't have to bend over or get down on the floor and the weight of the fabric helps with getting it smooth. As many have said use a fairly light hand. I just make big loops in about 12" circles all the way down the quilt on all touching sides.
|
I have not tried spray basting. From what I am reading sounds like it would really help, but where do you buy it.
glenda c in Texass [email protected] |
Most LQS carry the 505. Walmart and Joann Fabric, and Hancock Fabric all carry either the 505 or another brand. Wow, Polly, what do you hold the top of the quilt up with..to the design wall? I don't have one so I don't know what the wall is made from
|
I love the spray basting but remember you don't have to spray it all over less is more. If you use to much it will gum up your needle. I have learned the hard way. just a little squirt goes a long way.
Jan |
Originally Posted by BarbaraA
I live in Lompoc. No quilting stores here. I quilt/fabric shop in Santa Maria, SLO area and Goleta. I was happy to find a new quilt store in Goleta this weekend, couldn't stay too long, hubby was in car.
There are several quilt shops that you need to learn about. There's the Old Town quilt shop in Orcut, The Creation Station in Buelton, Sew Fun and Quilte's Cupboard in Atascadero, ( love Sew Fun!!!) The Cotton Ball in Moro Bay, The Quiltery and Wine Country Quilting in Paso Robles, The Quilt Attic in Arroyo Grande, Quilting Cousins in Pismo, and if you are ever all the way done this direction, The Treasure Hunt in Carpenteria, Quilt Ventura in Ventura and Baron's here in Camarillo. |
This is my first post! Really love reading all these comments and learning tons. I just moved back from Vanuatu (South Pacific) after 19 years and have been quilting (obsessively, I might ad) for about 7 years, learning from all the mags I subscribe to. I have wanted to try basting spray after reading about it, since I do mostly bed-sized quilts, quilting by hand, and am no longer physically able to get down on the floor to baste!(without a few margaritas or really strong pain meds after!) After reading all these comments, I am going to rush out to get some 505 to baste the 3 queen-sz tops I have been dreading to baste!!
|
Originally Posted by Vanuatu Jill
After reading all these comments, I am going to rush out to get some 505 to baste the 3 queen-sz tops I have been dreading to baste!!
|
Thanks, I will! Off the subject, but how can I add my location (in hiding sounds strange!)
|
Originally Posted by Vanuatu Jill
Thanks, I will! Off the subject, but how can I add my location (in hiding sounds strange!)
|
Thanks, now I feel at home! I am what my kids call "computer challenged", which is a step up from my previous "computer illiterate". I have my quilting sites (and coupon/cooking sites) to thank for the education! I seem to spend more and more time on the computer "surfing" and just looking up stuff-all which takes me away from my quilting!!
|
I love spray basting! I have never like pinning, I always had a wrinkle in the backing.
|
Originally Posted by Jeanniejo
Do any of you use spray to baste your quilts? I really love to do my own quilting but the pins are a pain to put in and to move while quilting. I really don't know the pros and cons and want some input from those in the know. I did buy some spray probably 5 years ago but never used it. Will it still be alright to use? I appreciate any suggestions.
|
3 Attachment(s)
Just wondering what the difference is between quilt spray and Elmers brand craft bond spray adhesive? The stick style spray saves me tons of pinning, especially for larger projects like baby comfort quilts or larger queen adult size quilts.
Do you use iron on batting?..that is great too. and no slipping under my sewing needle, it all feeds together when you sew all layers down for the quilt sandwich. from, Debbie |
i love the spray basting , only pin one quilt and hated it after that i have been spray basting ever since
|
I had not heard of the 505. Been using something from Joann's. I love the time and effort it saves me. My hands some days don't work very well. It gets painful putting in pins.
|
I've been starching blocks for a quilt as you go quilt. Would I be able to use spray baste with spray starch? Has anyone had any problems with any chemical reaction using the two? Or is it just fine to use both together?
|
Originally Posted by Carol W
I've been starching blocks for a quilt as you go quilt. Would I be able to use spray baste with spray starch? Has anyone had any problems with any chemical reaction using the two? Or is it just fine to use both together?
I don't believe there is much "chemical" reaction to spray starch or sizing. I do rinse my quilts in cool water following completion. That assures me that any markings, startch or 505 is gone when the quilt is done. never had any problems at all. |
Thanks!!
I've done two rows of the qayg and wasn't as pleased with some of the seams. I'll definately try the spray basting now!!! :) |
if you are doing quilt as you go, i would probably not use the spray...you are going to have too much overspray.
Instead, starch and press what you have just stitched down, and pin in place (i like flat head pins). Then put your next piece on RST and stitch. once it is stitched, press open again. The only part of qayg that I may consider using 505 is to attach backing squares to batting squares if that is the process you are using. it all depends upon the technique involved. do you know what I mean? |
Yes I do.
It's a very quick qayg. I am using 12 1/2" blocks. Doing just a little quilting on the blocks and sewing the blocks together. I have starched the backing and top of the block and sandwiched them with the batting. I thought maybe the top wouldn't "slide" as much when I'm sewing the blocks together if I used the spray basting. |
ok. i see what you mean. i usually don't spray such small pieces. but you could cut your backing squares, batting squares and piece the top squares. Then spray the batting square (or the wrong side of the backing square, whichever you prefer) and position them together, then spray the remaining side of the batting square and put your pieced square on top. It will hold it. (sometimes i put a pin or clip on the edges just so nothing gets caught on the feed dogs or presser foot when I am sliding into place on the machine).
And since you are spraying on a relatively small area, I think I would put something underneath, such as a piece of newspaper, plastic tablecloth, or even a sheet which can be thrown into the washer easily. That way you won't have as much trouble with "overspray". That is the only problem about spraying small pieces, as it only takes a light mist to make the fabric or batting sticky, and you are probably going to waste some of your spray. Hope this helps! I'm off to clean. :cry: I'd much rather be sewing! |
Thanks for the information!!!
Come clean my house!!! I fractured my foot yesterday, so I won't be doing much housework. Thanks again!! |
Originally Posted by Carol W
I fractured my foot yesterday
Hope it heals quickly! Summer is a terrible time for wearing a cast. Ask me how I know... |
Thanks!!! It's in a compression boot right now. I can't get in to see the orthopedic until June 28th. :(
Did you have your's in a cast for the whole summer? |
I use basting spray on everything I quilt! I love it and have never had a problem. I have asthma and lots of allergies so actually My DH does the spray basting for me on large pcs ; I sneak and hold my breath to do small quick pcs on occasion! Hold my breath and run outside for about 10 mins . Quilting is more important than breathing!! teehee
|
Originally Posted by Carol W
Thanks for the information!!!
Come clean my house!!! I fractured my foot yesterday, so I won't be doing much housework. Thanks again!! I had shoulder surgery and 4 months of PT in November and then as I was coming out of that, I needed my gallbladder out! So, while my DH takes good care of me and the outside of the house, he does not "clean". So you can imagine what needs doing around here!! Feel Better! {{{cyber hugs}}} |
It is my left foot. Unfortunately I'm left dominant even though I write with my right hand.
I'm a dental hygienist and at work today it was really weird to have to use my right foot. I'm going to move my sewing machine pedal over to the right to use with my right foot. We'll see how well that goes!!! LOL I'm glad that you have a wonderful hubby to help you out!!! Are you doing better? |
yes, thanks! the shoulder is great and I am just now starting to get up and about after the GB. All I say is "what next?".
I hope your foot feels better and you heal quickly! I vote for time off from work and putting it up! (and sewing while you do)! :-D |
Thanks me too!!! :)
|
Originally Posted by betlinsmom
I use basting spray on everything I quilt! I love it and have never had a problem. I have asthma and lots of allergies so actually My DH does the spray basting for me on large pcs ; I sneak and hold my breath to do small quick pcs on occasion! Hold my breath and run outside for about 10 mins . Quilting is more important than breathing!! teehee
|
Have any of you used the quilt basting gun-the one that shoots small plastic tabs thru the sandwich to hold it together? I bought a June Tailor a few years back as well as the plastic grid to put under the sandwich, and used it a couple of times (it was quicker than pinning or thread basting).
|
Good grief, I sure spelled that one wrong, meant odor.
|
I LIKE FUSIBLE BATTING. I HAVE USED THE SPRAY BUT I MANAGED TO GET IT ALL OVER MY FLOOR AND MY HUSBANDS FEET WERE STICKING "WHAT'S ALL OVER THE FLOOR?" " GEE HONEY i DON'T KNOW." SINCE I FOUND THE FUSIBLE BATTING I DON'T USE THE SPRAY ANYMORE.GOOD LUCK.
|
I've used spray and fusible batting too. both work fine.
|
Originally Posted by Vanuatu Jill
Have any of you used the quilt basting gun-the one that shoots small plastic tabs thru the sandwich to hold it together? I bought a June Tailor a few years back as well as the plastic grid to put under the sandwich, and used it a couple of times (it was quicker than pinning or thread basting).
|
All times are GMT -8. The time now is 06:32 AM. |