|
Well I normally do not prewash so the muslin was not prewashed. As for the knit, it wasn't prewashed either. None of it was. I also did minky with the dots and felt. I had some Moda Bella solid that I used along with some stiffer cotton. I didn't have a flannel piece. :(
I will say the burlap didn't stamp too well due to the weave but that was expected. And yes, heat setting means I put a piece of cloth over the fabric with the stamp and pressed with the iron for about 15 to 20 secs. Not long at all. Oh and UFO is UnFinished Object. |
Originally Posted by kathdavis
(Post 5338383)
I wonder if you have to wash your fabric first before stamping, because of the chemicals on the fabric?
Also, can't wait to see how knits and the other fabric does. Thanks for doing all the footwork for us. Stamps can also be used with colorfast success with many fabric paint or soft body acrylics, fabric dyes, discharge pastes, and more. |
You can also stamp velour and velvet with large stamps to give the fabric an embossed look.
|
thank you for clueing me in. and yes this is a great place
|
Every fabric has sizing added as part of the processing process and it has to be washed out before any type of paint or ink is applied or the medium adheres to the sizing, not the fabric, and washes out much more readily. I rewashed the tone on tone yesterday before I wrote on it because I know I had previously starched it when I pressed it.
|
As of right now, the ink came off the minky. The solid Bella faded some but the knit looked good. They are in the dryer now. I will post a before/after picture. Of course the burlap and laminated didn't wash very well but I figured as much, just had to try.
|
it is always a good idea to pre-wash your fabrics before any technique that means adding something to the fabric- ink, dyes, paints, fusables---you wash with detergent to remove any sizing/starch, oils, chemicals- then dry ---no fabric softener---you are removing- you don't want to add back in-
then dyes, paints, inks, fusables all work better |
As noted, none of the scraps were pre-washed but here are the results:
https://instagr.am/p/MrFOMMkLji/media/?size=l Ink disappeared on the minky and felt, the satin type fabric faded some. Faded on the Bella Solid and knit. Looks good on the cheaper, stiff cotton. |
you can also use rubber stamps to emboss velvet (silk or cotton). Put the stamp on the ironing board, design side up. Put the fabric, nap side down, on top of the stamp and iron on the appropriate setting for the velvet.
|
Thanks for all the samples, this was great!
Originally Posted by tngal22
(Post 5338217)
So I have seen around the craft world, small projects with stamps on fabric. I had wondered if it was washable so I did a research. I found one lady that tested about 10 different inks and washed all of them. The best was VeraCraft. It did not fade at all and looked great. So I went to JoAnn's yesterday and got some, VeraMagic in black and did my own test. I put a stamp on scrap muslin and heat set one and didn't the other. I washed both scraps in hot water and then dried it. The heat set one looks great!
I haven't tried on cotton fabric yet but will report back if anyone is interested. Thought it would make a cute little addition to your projects. I found a stamp that has "handmade with love" on it. Here is a pic after washing but before drying: https://sphotos.xx.fbcdn.net/hphotos...36215427_n.jpg |
| All times are GMT -8. The time now is 03:48 PM. |