|
Rob, I also remember that machine. You ran the fabric fold through to measure it, then kind of hit the top of it to start the cut. Except plaids, which I remember being cut single, right along the thread line.
Nonetheless, we still would pull a thread get the grain of the width, then checked to see if the warp and weft were perpendicular, then pulled it on grain if needed. And Mom made us out a new fold into the fabric if it wasn’t exactly in the middle. |
Originally Posted by indymta
(Post 7918154)
I'm sorry to be confused by this but could someone explain why ripping the fabric is helpful for large backings. Don't
you still have to line up the fabric to make sure there aren't any wrinkles (that it is straight)or are you folding the fabric with the sides matching of what you just ripped and you cut from there? Fabric is woven with 1/2 of the threads going horizontal and 1/2 vertical. If you are able to line it up so that the crosswise thread are at 90 degrees to the length wise threads, then your fabric is "straight", which is a perfect scenario. Most all the methods that are described are attempting to straighten fabric so that the vertical and horizontal threads are at 90 degrees to each other. bkay |
Originally Posted by Krisb
(Post 8024930)
Rob, I also remember that machine. You ran the fabric fold through to measure it, then kind of hit the top of it to start the cut. Except plaids, which I remember being cut single, right along the thread line.
Nonetheless, we still would pull a thread get the grain of the width, then checked to see if the warp and weft were perpendicular, then pulled it on grain if needed. And Mom made us out a new fold into the fabric if it wasn’t exactly in the middle. Yes, my Mom did that for all the fabric she purchased, I’d forgotten about making the new fold after pulling the thread and straightening.... thanks for remindng me how that machine worked... Rob |
| All times are GMT -8. The time now is 05:44 AM. |