1 Attachment(s)
I'm still learning on measurements and I really don't want to screw things up.
With this diagram showing the finished measurements, and the cutting chart on the right side, are my cutting measurements for the dimensions needed in the diagram correct? I've only got a 12x9 area to work with. That's why the dimensions are not all in 1/4" increments There will be a 1/4" binding all around the outside to ensure that the 9x12 stay intact. Thanks, Tracy Layout & cutting for a 9x12 tray liner [ATTACH=CONFIG]50506[/ATTACH] |
Ok...I"m not great at this, but no your dimensions are not right.
C- you only need 4..not 6 D...7/8" x 6/1/2" E 7/8" x 9 1/2" F 1 1/8" x 7 3/4" G 1 1/8" x 12 1/2" and I think that as it is...your dimensions are not 9 x 12 over all..but 12 x 12...now mind you...I have had only 1 cup of coffee. Just check it again to make sure....cause...I could easily be wrong! |
I just added the finished measurements from top to bottom, and they DO add up to 9". 7/8 + 5/8 + 1-1/2 + 3 + 1-1/2 + 5/8 + 7/8
By making D only 7/8 instead of 1-1/8, that would only give me a 1/8" seam when connecting it to the BCB piece and to the F piece. For E & G pieces, if I add another 1/2" would't that put the total to 12-1/2 x 9-1/2? The total measurements can be no more than 12x9. FIXED: I see that my F was wrong....need to add another 1/4 to that Why only 4 geese (C)? There are 6 geese. 2 on top, 2 on bottom and 2 on the sides. Note, I am still using 1/4' seams. Also, that the 7/8" border around the outside will be having the 1/4" binding on it, so that will knock the pattern down to 5/8" to match the inner border. |
Found another error too:
E needs to be cut at 10-3/4 and not 9-1/2 (becasue of the added D pieces) That would make finished E at 10-1/4" |
With your changes to E and F, I get the same measurements as yours. Good job! :)
|
How did you get that animated icon in your signature?
I have one I'd LOVE to use |
Your piece will FINISH to 9 x 12?
The binding is included in this dimension? |
Yes...binding IS included in the dimensions
|
:oops: Well...I told you I could be wrong...but its never a bad thing to check it again, is it?
I am an idiot...I totally didn't see the FG on the sides to count this morning. In my defense..I did tell you that I hadn't had enough coffee... :oops: :oops: Please show us the finished product...it looks like it will be cool! |
Yea, I figured it was the coffee :shock: I already had my coke, but I still missed 2 things anyway.
|
All times are GMT -8. The time now is 04:25 AM. |