Thread Stand
 

I am about to embark on a project that will use a lot of metallic thread an have seen the Mertteli thread stand advertised. I live in the UK so postage from USA would be alot. Does anyone have any suggestions for something similar for a Bernina 440. I have a thread stand that stands on the table and takes the thread up high and then into the machine. I think this will twist the thread though.

What do you use?

I had to go look at a Mertteli thread stand, as I have not heard of one. I am afraid I have no suggestions, though I am anxious to see what answers you get. I think the thread stand you describe that you already has is like the one I have. I had not thought about it twisting the thread, though I suppose it does.

I have seen some ladies who just put their thread in a tall mug, but I don't think that is the answer for you. I am sure someone here will have some ideas.

Dina

Hi Thanks Dina, I think the tall mug would have the same as the one we have. Answers will be interesting xx

I just put my thread in a coffee cup next to the machine. I haven't had any problems with this method, but I haven't used metallic thread.

Same here. Why would metallic thread need something different?

Barnyarns (UK company) has the Superior Thread Stand that can be converted from vertical to horizontal - some cops are wound so that they need to be pulled from the top whilst others need to be pulled off from the side. If you go to their web site you'll see that this stand has a vid to show how it works. You might also want to send them an email for attention of Jon MacPherson who is something of a thread expert! He will advise you on the best metallic to use since not all are equal. Extensive habby, fast and super helpful service. No, I'm in no way associated with the company. Good luck.

This is what I have on my wish list for when I learn my embroidery machine.

http://www.sewingsupplywarehouse.com/stacknstitch.html

I love my Superior stand

I have an older Bernina 1530 and I use to wind my metallic onto a bobbin very slowly making sure there were no twists. I also used a product I bought at JAF that is called Sewer's Aid by W.H Collins (notions manufacturer). Like an lubricant, place a few drops sparingly on the thread and never had a problem.

The trick with metallic thread is to use the right needle and have the thread about 2 feet away from you so it can relax. I just use a big coffee mug! Cheap and easy to move if I need to.

Love Love Love the Superior thread stand. Watch this video to understand the winding of the thread off the spool.

http://www.superiorthreads.com/video...thread-holder/

I have a 440 and I also have a free standing thread stand that holds 1 spool of thread. I have used it with metallic thread as well as putting the thread in a coffee mug behind the machine. The most important part of using metallic thread is having the correct needle. You can find charts for needles on many of the thread sites as well as on the needle sites. I keep my metallic needles separate from the others and only use them for metallic thread. Good luck.

I use this little trick and it works every time for me - take one of those little peanut shaped polystyrene things they use for packing - you can buy them in Staples or any store like that (I'm mean I save mine when it comes in packages etc and they last a while before needing to be replaced) thread a needle pass through it the middle of the peanut making sure the thread comes through with ease thread machine as normal and hey presto you will find that any metallic thread will not twist. As you already have a good stand why waste money

That's handy. I like the fact you don't have to remove the spool from the holder to use it. But, it only holds the small spools. Most of mine are larger.

I used to try to use metallic thread with my Pfaff (and my Singer too), never had any luck. Then I had a friend (she is the reason I quilt and she knows it, another story), told me to put the metallic thread in my bobbin. I did this (it takes a little getting used too), but it works. You are looking at the back when you sew, but it has worked best for me. Good luck

I concur that Sewer's aid is great to use when sewing with metallic thread.

I taped a paper clip (for a thread guide) to the top rear of my machine, and put my thread cones in a small finished ceramic planter. Works for me.

I would get the superior thread stand if you really want one it is more versatile and much more economical. However like others here I use a cup or large glass or canning jar. Depending where I am I have even set the cone on the floor! But metallics are another thing try sewing normally first to see how it does. The brand, the age of thread (many new advances in manufacturing of thread make it easier to use) the type of metallic it is all effect how it sews. The tip of using it in the bobbin is really great and saved my sanity more than once. If your thread sews fine but keeps breaking every so often the bobbin is the cure! Sewers Aid is a great product, but DO NOT over use. Also try a larger eyed needle such as a top stitch needle as well as a larger size. Such as Top Stitch size 16 to 18. Have fun creating and let us know how it turns out and what worked best for you.

Amazon has that stack n stitch cheaper than shown in that link, at least with my Amazon prime.

How is buying a quality product that will do the job you want it to do a waste of money? That doesn't make any sense to me.

Wow, this looks great - I'd love to have it!

The Stack and Stitch is $23 with free 2nd day shipping at Amazon using Prime.

The Superior stand is $28 with free 2nd day shipping at Amazon using Prime.

What you have will work just as good as any other. Just move your stand away from your machine so the thread has has time to straighten out before it goes through the machine

Living in UK. As well . I would try a mug before purchases as the cost and shipping is astronomical from US. I HAVE A WEIGHTED base very heavy. With a metal rob and a curve at top to thread through it is as high as the bernina I use. I have had problems with some mettler threads breAking . Plenty of practise is needed.

Good luck.

My DH made a stand for me out of a flower pot saucer and a heavy threaded wire. He even put a short post on to hold the bobins I have wound for that project. I love it. And since he is no longer with us, it is a true treasure

I had never seen the Martelli thread dispenser and it sure looks nice but man the PRICE! I do have the superior thread stand - not the metal one but the other and you can get your thread to come off of it either horizontally or vertically and I love it. It is $24.99 instead for $149.

This is what I use for a thread stand when I sew away from home. I use the coffee mug trick, but I also use a ruler with holes and a clothespin. Clothespin the ruler just inside the mug. Thread your thread thru the top hole and then toyour machine. Sometimes I have to move the mug around to get the thread to come off the spool the way I like. Hope this helps! (sorry about the picture!nI had a hard time getting a good shot..then my tablet died and I had to plug it in! So much for finding a decent spot for a picture! HA!)