Viking Emerald 118 help
 

Does anyone on here have the Viking Emerald 118? I am trying to do free motion quilting with it and I can not get it to sew properly. Either the thread is to loose on the top or too loose on the bottom. When I first got it I took a class to learn how to use it and when I got home I practiced the free motion and it worked fine. Now I can not get it to work properly. I know there is probably some setting I am missing but I can not figure it out. I hope someone can help me.

I don't own one but I sell them - I'd start by completely rethreading the machine, in case you haven't already done that. Since it seems to only the a thread/tension problem, remember that, usually, if the loose thread is on the bottom, it's top tension, and if loose on the top, it's the bottom tension. The Vikings are not designed in a way that you can adjust bobbin tension but sometimes, tho not often, the thread can jump out of the bobbin tension mechanism - if you keep having problems in the bobbin tension, you need to take it in to have it looked at. Depending on when you purchased it, it could be a warranty issue.

If the top tension is off continually, use some of the texturized dental floss (made for dentures, mainly) and run it thru the tension discs to make sure all the lint is out then rethread again.

Other than thread tension - make sure you've completely dropped the feed dogs since sometimes people have not completely slid the switch over.

Thanks. I will try it again starting completely over with threading.