Some time ago there was a thread on quilting only a third of a quilt at a time, and joining the batting as you go........
Has anyone had any expenience of this method, or remember the thread at all? Thanks :D |
This is done with the batting cut into three pieces and you quilt just the center first. Then you join the next piece of batting and quilt that portion. Eventually you have 100% of the quilt on you machine.
|
Have you used this method NP3, and is it easy...I mean easier?
I'm really trying to avoid the floor for sandwiching, and not looking forward to wrestling such a large quilt on my machine, seeing it's not FMQ I'm doing. Thanks :-) |
You would quilt 3 separate quilts to within 1/2 inch from where they are to be joined. After all the sections are quilted, you join them together and use a sashing strip to hide the seam on the back. Search Quilt as You Go for a block by block style or even Quilting in Sections and you should find examples of what it looks like. You only have the entire quilt on the machine when you are putting the sections together and of course putting the binding on.
Sharon Pederson & pair of ladies I forgot the names of did episodes on Simply Quilts years ago and I'm sure there are others. Check YouTube for videos. I have quilted block by block which is very similar to the quilting in sections & it was very easy. I quilted each block and then used sashing front & back to put them together row by row. It was a lot of hand sewing on the back to finish but if you use a matching thread color, you could probably machine finish it easily enough. I was a new quilter at the time so I followed the directions I had seen. |
Originally Posted by BKrenning
You would quilt 3 separate quilts to within 1/2 inch from where they are to be joined. After all the sections are quilted, you join them together and use a sashing strip to hide the seam on the back. Search Quilt as You Go for a block by block style or even Quilting in Sections and you should find examples of what it looks like. You only have the entire quilt on the machine when you are putting the sections together and of course putting the binding on.
Sharon Pederson & pair of ladies I forgot the names of did episodes on Simply Quilts years ago and I'm sure there are others. Check YouTube for videos. I have quilted block by block which is very similar to the quilting in sections & it was very easy. I quilted each block and then used sashing front & back to put them together row by row. It was a lot of hand sewing on the back to finish but if you use a matching thread color, you could probably machine finish it easily enough. I was a new quilter at the time so I followed the directions I had seen. It is easier when you do the middle section. The last section is just as bulky. The key is having a really big work space. The method lessens the amount of quilt rolled up in the throat of your machine. |
Originally Posted by np3
Originally Posted by BKrenning
You would quilt 3 separate quilts to within 1/2 inch from where they are to be joined. After all the sections are quilted, you join them together and use a sashing strip to hide the seam on the back. Search Quilt as You Go for a block by block style or even Quilting in Sections and you should find examples of what it looks like. You only have the entire quilt on the machine when you are putting the sections together and of course putting the binding on.
Sharon Pederson & pair of ladies I forgot the names of did episodes on Simply Quilts years ago and I'm sure there are others. Check YouTube for videos. I have quilted block by block which is very similar to the quilting in sections & it was very easy. I quilted each block and then used sashing front & back to put them together row by row. It was a lot of hand sewing on the back to finish but if you use a matching thread color, you could probably machine finish it easily enough. I was a new quilter at the time so I followed the directions I had seen. It is easier when you do the middle section. The last section is just as bulky. The key is having a really big work space. The method lessens the amount of quilt rolled up in the throat of your machine. |
Check out this website for basting a quilt. I have several large quilts that I haven't finished because I can't get on the floor and do the conventional basting. I intend to try this as soon as I get my backing. Kathy
http://www.sharonschambernetwork.com...Quilt.aspxneg. |
Prism99 suggested this and I did it on my avatar Steeler picture.
You can also split the quilt into 3 parts (without the division showing later) to make the bulk easier to handle. To do this, you layer the sandwich as usual, pin back a third of the top and backing fabric so it is out of the way, then cut the batting only in large S-shaped curves. Mark both sides of the cut so it is easy to reposition the two pieces later. (The curving cutting line helps with the repositioning later and also hides the join.) Pin the top to the backing fabric. Do the other side of the quilt the same. Machine quilt the middle section, leaving a good 4 inches or so free near the cut edges. When the middle is done, re-attach one side of the batting with hand tailor tacks (or some people do it with a long and wide machine zigzag) and re-position the top and backing over that section. Complete the machine quilting on that side. Repeat with the other side. Marti Michel has a book on how to do this, but I first saw this process described in detail in another book by another quilter (whose name escapes me at the moment). |
Originally Posted by jlong
Prism99 suggested this and I did it on my avatar Steeler picture.
You can also split the quilt into 3 parts (without the division showing later) to make the bulk easier to handle. To do this, you layer the sandwich as usual, pin back a third of the top and backing fabric so it is out of the way, then cut the batting only in large S-shaped curves. Mark both sides of the cut so it is easy to reposition the two pieces later. (The curving cutting line helps with the repositioning later and also hides the join.) Pin the top to the backing fabric. Do the other side of the quilt the same. Machine quilt the middle section, leaving a good 4 inches or so free near the cut edges. When the middle is done, re-attach one side of the batting with hand tailor tacks (or some people do it with a long and wide machine zigzag) and re-position the top and backing over that section. Complete the machine quilting on that side. Repeat with the other side. Marti Michel has a book on how to do this, but I first saw this process described in detail in another book by another quilter (whose name escapes me at the moment). |
Originally Posted by np3
Originally Posted by BKrenning
You would quilt 3 separate quilts to within 1/2 inch from where they are to be joined. After all the sections are quilted, you join them together and use a sashing strip to hide the seam on the back. Search Quilt as You Go for a block by block style or even Quilting in Sections and you should find examples of what it looks like. You only have the entire quilt on the machine when you are putting the sections together and of course putting the binding on.
Sharon Pederson & pair of ladies I forgot the names of did episodes on Simply Quilts years ago and I'm sure there are others. Check YouTube for videos. I have quilted block by block which is very similar to the quilting in sections & it was very easy. I quilted each block and then used sashing front & back to put them together row by row. It was a lot of hand sewing on the back to finish but if you use a matching thread color, you could probably machine finish it easily enough. I was a new quilter at the time so I followed the directions I had seen. It is easier when you do the middle section. The last section is just as bulky. The key is having a really big work space. The method lessens the amount of quilt rolled up in the throat of your machine. You know what has me confused now, is how do you only sandwich the first strip down the centre with all the other fabric of the top and backing on each side? |
Originally Posted by Crlyn
Originally Posted by np3
Originally Posted by BKrenning
You would quilt 3 separate quilts to within 1/2 inch from where they are to be joined. After all the sections are quilted, you join them together and use a sashing strip to hide the seam on the back. Search Quilt as You Go for a block by block style or even Quilting in Sections and you should find examples of what it looks like. You only have the entire quilt on the machine when you are putting the sections together and of course putting the binding on.
Sharon Pederson & pair of ladies I forgot the names of did episodes on Simply Quilts years ago and I'm sure there are others. Check YouTube for videos. I have quilted block by block which is very similar to the quilting in sections & it was very easy. I quilted each block and then used sashing front & back to put them together row by row. It was a lot of hand sewing on the back to finish but if you use a matching thread color, you could probably machine finish it easily enough. I was a new quilter at the time so I followed the directions I had seen. It is easier when you do the middle section. The last section is just as bulky. The key is having a really big work space. The method lessens the amount of quilt rolled up in the throat of your machine. You know what has me confused now, is how do you only sandwich the first strip down the centre with all the other fabric of the top and backing on each side? |
Originally Posted by jlong
Prism99 suggested this and I did it on my avatar Steeler picture.
You can also split the quilt into 3 parts (without the division showing later) to make the bulk easier to handle. To do this, you layer the sandwich as usual, pin back a third of the top and backing fabric so it is out of the way, then cut the batting only in large S-shaped curves. Mark both sides of the cut so it is easy to reposition the two pieces later. (The curving cutting line helps with the repositioning later and also hides the join.) Pin the top to the backing fabric. Do the other side of the quilt the same. Machine quilt the middle section, leaving a good 4 inches or so free near the cut edges. When the middle is done, re-attach one side of the batting with hand tailor tacks (or some people do it with a long and wide machine zigzag) and re-position the top and backing over that section. Complete the machine quilting on that side. Repeat with the other side. Marti Michel has a book on how to do this, but I first saw this process described in detail in another book by another quilter (whose name escapes me at the moment). |
[quote=np3][quote=Crlyn][quote=np3]
Originally Posted by BKrenning
You still roll the top and the backing up the way you would if the batting was inside. The advantage is that it is a smaller "piece" to manage. It doesn't get heavy and in your way. :D |
[quote=Crlyn][quote=np3][quote=Crlyn]
Originally Posted by np3
Originally Posted by BKrenning
You still roll the top and the backing up the way you would if the batting was inside. The advantage is that it is a smaller "piece" to manage. It doesn't get heavy and in your way. :D You have to make the sandwich so you know how big to cut it. And when you cut the pieces off, you need to make a note of which edges were cut from where. That will help you when you put them back together (butt them up and stich them by hand or zigzag, never overlapping.) You want to pin it well through the center then roll the front and back out of the way and cut the batting. Be very careful not to cut the front or back!!! Then when you do the sides, the center is stable because it is already quilted and you pin/baste the first side. |
Thank you for your time mp3, I'm going to try it anyway, so I will see how I go.
|
Since I can't find the tute, I am looking thorough my magazines. If I get the name of the technique, we will be able to find it. It is the best method for something this large.
Nancy |
Originally Posted by np3
Since I can't find the tute, I am looking thorough my magazines. If I get the name of the technique, we will be able to find it. It is the best method for something this large.
Nancy :-) |
i have quilted several large quilts in 2 or 3 sections and they came out fine. was much easier to handle and not so frustrating trying to shove so much thru the machine opening.
|
Originally Posted by Fancy Nancy
i have quilted several large quilts in 2 or 3 sections and they came out fine. was much easier to handle and not so frustrating trying to shove so much thru the machine opening.
Can you remember the name of the technique? I am having trouble finding it!! |
Originally Posted by np3
Originally Posted by Fancy Nancy
i have quilted several large quilts in 2 or 3 sections and they came out fine. was much easier to handle and not so frustrating trying to shove so much thru the machine opening.
Can you remember the name of the technique? I am having trouble finding it!! |
Could you be looking for "Machine Quilting in Sections" by Marti Michell?
|
Originally Posted by AlwaysQuilting
Could you be looking for "Machine Quilting in Sections" by Marti Michell?
Thank you though. :-) |
I tried this method a couple weeks ago. It is a little easier, but there's still a lot of bulk even without the batting in that section. I used the spray basting, which I love, no problem, had labeled the right/left side of the batting, but had a little trouble lining up the cut edge to the corresponding edge. I haven't decided if I like that method, I have another big one to do, but will mark my design on it, instead of just FM. This was my first experience with this method, so it may get easier.
|
Originally Posted by np3
Originally Posted by Fancy Nancy
i have quilted several large quilts in 2 or 3 sections and they came out fine. was much easier to handle and not so frustrating trying to shove so much thru the machine opening.
Can you remember the name of the technique? I am having trouble finding it!! Here http://www.quiltingboard.com/t-343-6.htm Marylou is still on the board, I would love to hear if she is still doing this method! |
also called quilt as you go, machine quilting in sections and books out on reversible quilts (by sharon pederson).
|
I have a {JoAnn's} table that opens up to expand it. After assembling one quilt {on the floor}, sore back and all, I opened up my JoAnns table and basted my log cabin quilt in sections, starting in the middle of the quilt and then just moving the quilt on the table in sections until the whole thing was basted. It came out beautifully with no bunches on the back. You can get these tables at JoAnn's Fabric and use one of their 50% off coupons so it comes to about $59.00 half price. The table will "fold up" as you can let down the sides and it becomes very compact for storing.
|
Originally Posted by nativetexan
also called quilt as you go, machine quilting in sections and books out on reversible quilts (by sharon pederson).
|
Carolyn, Yes, I still use that technique. It is the only way I can quilt a king size quilt. Each time it gets a little easier. I just reread my post, and that is exactly how I still do it. Good luck, Marylou
|
Thank you Marylou, I think I will try it maybe on a smaller quilt to start with........it's a bit scary for a first time, especially when you have put so much work into a large quilt.
Thank you to everyone for any help you were able to give me. :D |
I'm so tickled I ran across this thread! Thanks everyone. I have 3 queen/kings waiting on me to finish up!
|
Carolyn, Good Luck to you. Remember, you are only cutting the batting which is very forgiving when you sew it back together. Your back and especially the top where you did all that work, remains in one piece. One thing I forgot to tell you, on a large quilt, I roll up the side that goes under the machine and use either bicycle clips or large pins and scrap material strips to keep the roll together. That way it is easier for me to juggle the quilt. Let me know how it goes. Marylou
|
Thankyou so much Marylou, I knew I wasn't dreaming about this method and had read it on here somewhere. :-)
|
Originally Posted by Crlyn
Originally Posted by np3
Originally Posted by Fancy Nancy
i have quilted several large quilts in 2 or 3 sections and they came out fine. was much easier to handle and not so frustrating trying to shove so much thru the machine opening.
Can you remember the name of the technique? I am having trouble finding it!! Here http://www.quiltingboard.com/t-343-6.htm Marylou is still on the board, I would love to hear if she is still doing this method! |
Originally Posted by pocoellie
I tried this method a couple weeks ago. It is a little easier, but there's still a lot of bulk even without the batting in that section. I used the spray basting, which I love, no problem, had labeled the right/left side of the batting, but had a little trouble lining up the cut edge to the corresponding edge. I haven't decided if I like that method, I have another big one to do, but will mark my design on it, instead of just FM. This was my first experience with this method, so it may get easier.
|
Originally Posted by navasota320
Check out this website for basting a quilt. I have several large quilts that I haven't finished because I can't get on the floor and do the conventional basting. I intend to try this as soon as I get my backing. Kathy
http://www.sharonschambernetwork.com...Quilt.aspxneg. |
Originally Posted by irenecarter
Originally Posted by navasota320
Check out this website for basting a quilt. I have several large quilts that I haven't finished because I can't get on the floor and do the conventional basting. I intend to try this as soon as I get my backing. Kathy
http://www.sharonschambernetwork.com...Quilt.aspxneg. |
All times are GMT -8. The time now is 02:08 AM. |