Go Back  Quiltingboard Forums > Main
Quicker? half square triangles >

Quicker? half square triangles

Quicker? half square triangles

Old 04-06-2012, 06:21 AM
  #1  
Super Member
Thread Starter
 
MaryKatherine's Avatar
 
Join Date: Sep 2010
Location: Guelph, On. -
Posts: 2,021
Default Quicker? half square triangles

I'm not one to buy all those dedicated rulers that come on the market. I had cause to do over 100 half square triangles and don't have the quarter inch ruler; I used my fine line chalk marker to draw only the center line and then adjusted the needle position to give me a quarter inch line. Anything that can save me time I really like.
Anyone else have any ideas that fudge the product instructions?
Attached Thumbnails img_1040.jpg  
MaryKatherine is offline  
Old 04-06-2012, 06:27 AM
  #2  
Member
 
Join Date: Apr 2012
Location: FL
Posts: 5
Default

That's the way I learned in my quilting class...I'll keep an eye on this thread to see other options
cij1916 is offline  
Old 04-06-2012, 06:33 AM
  #3  
Senior Member
 
echoemb's Avatar
 
Join Date: May 2010
Location: Arvada, CO
Posts: 456
Default

I use inklingo to make HST's and QST's. I hate doing it any other way than this way. You print on the fabric and sew on the lines, love love love it. very accurate.
echoemb is offline  
Old 04-06-2012, 06:57 AM
  #4  
Power Poster
 
Join Date: May 2009
Location: NY
Posts: 10,590
Default

If I need a lot of HST that are the same, I use the grid method for making them. I mark directly on my fabric. As all drawn lines are cut it doesn't matter if the marks show, they are usually trimmed away or buried in my seam allowance. http://www.quiltchat.com/lessons/halfsqr.html
feline fanatic is offline  
Old 04-06-2012, 07:00 AM
  #5  
Super Member
 
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Default

Check out Triangulations software.
Candace is offline  
Old 04-06-2012, 07:12 AM
  #6  
Power Poster
 
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,680
Default

MaryK ... I've missed you (been creeping your blog!) wondered if you'd gone on a world tour!
That's the way I do HSTs ... and if I want lots, I use the grid method, as per
FelineF's link.

I usually oversize the squares a little ... then trim them up so they are perfectly square!!!
(and how I get them perfectly square and true to size ... eg. Christmas Churn Dash you saw IRL!)
QuiltE is offline  
Old 04-06-2012, 08:11 AM
  #7  
Super Member
 
SuzyQ's Avatar
 
Join Date: Jul 2008
Location: Ohio
Posts: 1,225
Default

Hope I can explain this so it makes sense. If your square is rather small take an index card and lay it diagonally from corner to corner, line your machine foot edge up against the index card and adjust your needle to 1/4" to the side of the index card and stitch. No need to mark anything. Flip it over and sew down the other side in the same manner. if your squares of fabric are larger, use a file folder or larger card. This is not my idea, a quilt group member shared this recently.

I've also used this method ... because I'm lazy and it makes several at once and no stitching on bias ... hope this makes sense ... if the square in your picture is say 2 1/2", cut 2 5" blocks (1 of each fabric) and on one piece (I do it on the lighter fabric) mark the centers on all sides and draw lines on center top to center bottom and center side to center side (your block now has 4 sections) then draw a line diagonal from the the center mark on top/bottom to the center mark on the sides. These will be your cut lines after you stitch. You can either draw lines or use your foot to stitch 1/4 inch on each side of the drawn diagonal line. After stitching, cut and you will have 8 1/2 square triangles. Again, not my idea ... read it somewhere.

Suzy
SuzyQ is offline  
Old 04-06-2012, 08:26 AM
  #8  
Super Member
 
Join Date: Jun 2011
Location: Michigan. . .FINALLY!!!!
Posts: 6,726
Default

http://www.connectingthreads.com/too...l_TD81088.html This is a guide that you put on your sewing machine bed so you don't have to draw the lines on your fabric. I haven't used it but know several quilters that have and they just love it!

heres 2 you tube video showing how it is used http://www.youtube.com/watch?v=sYWwMCllt_8

http://www.youtube.com/watch?v=1CDjiNwjdxQ
auntpiggylpn is offline  
Old 04-06-2012, 09:14 AM
  #9  
Senior Member
 
hevemi's Avatar
 
Join Date: Apr 2010
Location: Turku, Finland
Posts: 596
Default

Originally Posted by SuzyQ View Post
Hope I can explain this so it makes sense. If your square is rather small take an index card and lay it diagonally from corner to corner, line your machine foot edge up against the index card and adjust your needle to 1/4" to the side of the index card and stitch. No need to mark anything. Flip it over and sew down the other side in the same manner. if your squares of fabric are larger, use a file folder or larger card. This is not my idea, a quilt group member shared this recently.

I've also used this method ... because I'm lazy and it makes several at once and no stitching on bias ... hope this makes sense ... if the square in your picture is say 2 1/2", cut 2 5" blocks (1 of each fabric) and on one piece (I do it on the lighter fabric) mark the centers on all sides and draw lines on center top to center bottom and center side to center side (your block now has 4 sections) then draw a line diagonal from the the center mark on top/bottom to the center mark on the sides. These will be your cut lines after you stitch. You can either draw lines or use your foot to stitch 1/4 inch on each side of the drawn diagonal line. After stitching, cut and you will have 8 1/2 square triangles. Again, not my idea ... read it somewhere.

Suzy
The formula for this method: (Finished size of HST x 2) + 2 (1 7/8 if you're perfect). For instance, for 2" hst cut (2 x 2)+2 =6" squares of both fabrics right sides facing. Draw lines as Suzy says, connecting sided at center marks, then draw diagonals from top to bottom, both corners making a big X. Sew 1/4 on each side of diagonals ONLY, not the cross connecting the side centers, CUT along ALL lines(center and diagonal. Makes 8 , trim to unfinished 2 1/2"

Last edited by hevemi; 04-06-2012 at 09:19 AM.
hevemi is offline  
Old 04-06-2012, 09:25 AM
  #10  
Junior Member
 
An Arm Long's Avatar
 
Join Date: Nov 2011
Location: Maryland's Eastern Shore
Posts: 223
Default

I found thr wonder cut ruler to be worth the money.
An Arm Long is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sondray
Links and Resources
0
07-11-2009 04:57 PM
k3n
Links and Resources
3
06-06-2009 12:45 PM
sondray
Links and Resources
0
04-16-2009 05:01 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter