Sashing advice
11-07-2019, 02:21 PM
#1
Member
Thread Starter
Join Date: Jan 2019
Posts: 52
Sashing advice
I need some sashing advice. I am new to sashing. I have a quilt top consisting of 25 blocks which are each 17.5" square. It is very loud so I am wanting to use white sashing to separate the blocks. From what I've read, it might be easier to just sash each block individually to avoid it getting out of whack. Any advice on how to sash each block individually? I'm thinking 2.5-3" sashing. I really want to avoid cornerstones as well.
11-07-2019, 02:29 PM
#2
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,385
That's how I would do it, and that's how I've done it in the past. For a total of 3" wide sashing, use strips cut at 2". They will finish at 1.5 each side of the block, which will give you 3".
Another thought - with white or light-colored fabrics, the seam lines will be more visible. If you want to disguise this, use a white-on-white or some other kind of print.
Another thought - with white or light-colored fabrics, the seam lines will be more visible. If you want to disguise this, use a white-on-white or some other kind of print.
11-07-2019, 03:14 PM
#3
Super Member
Join Date: May 2017
Location: Sunny Florida
Posts: 4,422
A tutorial that may help with the step-by step process.
http://www.synthcom.com/~val/Quilts/...ngSashing.html
http://www.synthcom.com/~val/Quilts/...ngSashing.html
11-07-2019, 03:31 PM
#4
Member
Thread Starter
Join Date: Jan 2019
Posts: 52
Originally Posted by Peckish
That's how I would do it, and that's how I've done it in the past. For a total of 3" wide sashing, use strips cut at 2". They will finish at 1.5 each side of the block, which will give you 3".
Another thought - with white or light-colored fabrics, the seam lines will be more visible. If you want to disguise this, use a white-on-white or some other kind of print.
Another thought - with white or light-colored fabrics, the seam lines will be more visible. If you want to disguise this, use a white-on-white or some other kind of print.
11-07-2019, 04:19 PM
#5
Super Member
Join Date: Aug 2018
Location: Greater Peoria, IL -- just moved!
Posts: 6,055
I call it an L shape because that's the way I put it on. Doesn't really matter which side is which so long as you do it consistently, so do what makes sense to you -- could be top and right or right and bottom as well as left and bottom. Some fabric designs hide seams but white solid it will show, for me consistency matters. For others, not so much. When I lay out a top, I always number my blocks (alpha across, numbers down) because no matter how careful I am, I always turn something or drop them or something that messes them up. I pin the block number in the upper left corner, again, it doesn't matte where you do it so long as it is consistent.
My most recent project I had to use what I call the "two unwieldy strips" method because I was using a striped fabric and it was important for me that it ran in one direction, so I cut it from the length of the yardage and not across. So not every quilt calls for the same treatment, but if I possibly can, I opt for the L method
My most recent project I had to use what I call the "two unwieldy strips" method because I was using a striped fabric and it was important for me that it ran in one direction, so I cut it from the length of the yardage and not across. So not every quilt calls for the same treatment, but if I possibly can, I opt for the L method
11-07-2019, 11:37 PM
#7
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,385
Just to clarify, I meant to sew sashing strips on all four sides. Here's one where I sewed 2 sashing strips - one colored strip on all sides, then one black. If you look closely, you can see the seams in the black fabric. Then I sewed the blocks together. It was really easy.
[ATTACH=CONFIG]619411[/ATTACH]
[ATTACH=CONFIG]619411[/ATTACH]
11-08-2019, 02:00 PM
#10
Super Member
Join Date: Jul 2013
Location: Houston, TX
Posts: 9,504
Originally Posted by Iceblossom
I call it an L shape because that's the way I put it on. Doesn't really matter which side is which so long as you do it consistently, so do what makes sense to you -- could be top and right or right and bottom as well as left and bottom. Some fabric designs hide seams but white solid it will show, for me consistency matters. For others, not so much. When I lay out a top, I always number my blocks (alpha across, numbers down) because no matter how careful I am, I always turn something or drop them or something that messes them up. I pin the block number in the upper left corner, again, it doesn't matte where you do it so long as it is consistent.
My most recent project I had to use what I call the "two unwieldy strips" method because I was using a striped fabric and it was important for me that it ran in one direction, so I cut it from the length of the yardage and not across. So not every quilt calls for the same treatment, but if I possibly can, I opt for the L method
My most recent project I had to use what I call the "two unwieldy strips" method because I was using a striped fabric and it was important for me that it ran in one direction, so I cut it from the length of the yardage and not across. So not every quilt calls for the same treatment, but if I possibly can, I opt for the L method
Thread
Thread Starter
Forum
Replies
Last Post
