Seems too risky to me.
03-13-2012, 12:12 PM
#11
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,456
Yes, it sounds like the old fashioned floor frame. The quilt back is secured to the long poles on the top and bottom. The batt is layed on top while it is fully extended. The top is then pinned in place on the top of the sandwich. When everything is flat and secured the side poles are attached by bolts or clamps and the whole square quilt is taut. Everyone sits around the edge and as a section is finished, the quilt is rolled around the bars to allow access to the center of the quilt. It works great and if you have a lot of people quilting, the quilting can go quite quickly.
Since most people don't have the room to leave a full size frame out, this type of quilting is disappearing. Today most people hand bast their quilts before putting them in a hoop to hand quilt themselves. There is nothing as great as a floor frame and a good old fashioned quilting bee!
Since most people don't have the room to leave a full size frame out, this type of quilting is disappearing. Today most people hand bast their quilts before putting them in a hoop to hand quilt themselves. There is nothing as great as a floor frame and a good old fashioned quilting bee!
03-13-2012, 12:26 PM
#12
Super Member
Join Date: Jan 2011
Location: Nebraska..The Good Life
Posts: 2,102
This is basically how a long arm frame works too. The layers are lined up and pinned at the top, the sides are smoothed across from side to side. Some stitch down the sides to hold the layers, I prefer to pin with safety pins. As the quilting is done the all of the layers are moved at the same time onto the top roller and you progress towards the bottom of the quilt. As long as everything is smooth and taut starting out and the edges are basted or pinned in some manner, nothing moves and there are no tucks or wrinkles when finished. It's the same principal as taping the layers to the floor and then starting at one edge to baste.
03-13-2012, 09:48 PM
#13
Junior Member
Join Date: Aug 2011
Location: soutwestern ontario
Posts: 143
does it look sort of like this? this is how our senior ladies put a quilt together. we have never had a problem with puckers or folds. they have done it this way for years, and they will probably do it this way forever. lol.
03-13-2012, 10:04 PM
#14
Super Member
Join Date: Nov 2010
Location: Jozefow, Poland
Posts: 4,474
Originally Posted by cad_queen_2000
does it look sort of like this? this is how our senior ladies put a quilt together. we have never had a problem with puckers or folds. they have done it this way for years, and they will probably do it this way forever. lol.
03-14-2012, 02:52 AM
#16
Super Member
Join Date: Oct 2010
Location: dayton OH
Posts: 1,911
I have a smaller - 24x36 rectangular frame and I baste prior to putting a quilt in there because i noticed that the quilts seemed to shift as i quilted and my corners always came out wonky. I always start in the middle and work my way out. When I baste the quilt (I use thread, like it better than pins) my quilt doesn't shift and my corners remain square.
The quilting groups i work w/ all have the frames that you roll the quilt on - we don't baste those.
The quilting groups i work w/ all have the frames that you roll the quilt on - we don't baste those.
03-14-2012, 08:08 AM
#17
Senior Member
Join Date: Oct 2010
Posts: 647
Don't baste for a large floor frame. In the process of putting the quilt on the frame each layer is pulled taunt and fastened to the frame. If basted first the basting will pull unevenly causing tucks and wrinkles at best and could cause holes to tear in the quilt
03-15-2012, 05:36 AM
#18
Senior Member
Join Date: Feb 2012
Posts: 432
i quilt with a group at the community center and we don't baste. We use wooden poles with fabric on them to which we tightly pin backing, then spread out the batting and the quilt top then baste them to the fabric, roll once then we quilt from the outside in coming from all sides at once. no puckers or bad stitches allowed since the quilts are sewn on commission for other quilters. each quilter gets a personal quilt done as well according to how much time they volunteer to quilt others.
03-15-2012, 07:41 AM
#19
Super Member
Join Date: Oct 2010
Location: Prescott Valley, AZ
Posts: 1,329
When I was a child I went to quilting bees with women who were born in the 1800s. The method they taught was to stretch the back, batting, and top on a 4 sided frame, then roll 2 (opposite) sides toward the center. The women would line up on those 2 sides and start quilting from the center out. As a section was finished the quilt would be unrolled, restretched, and the quilting started again from where they left off. They did beautiful work.
03-15-2012, 02:40 PM
#20
Senior Member
Join Date: Jun 2010
Location: So Cal
Posts: 576
Originally Posted by Quiltlady330
In almost 40 years of quilting I have never quilted a project of any size either by hand or machine without basting it first. I use either safety pins, basting spray, needle and thread, or tacking gun. Several ladies in our local group tell me they never baste when they put it in a square free-standing quilting frame. They pin around the edge of the quilt and they begin quilting on all sides at once and not in the middle out as I'd been taught and always practiced.
Just curious what your experience has been with this type of procedure. I'm concerned because we are doing a very
special quilt for auction and I want it to be completed well without puckers or pleats on the back. It seems to me that we're really taking a chance on this happening when we don't baste. Am I being overly concerned about this?
Just curious what your experience has been with this type of procedure. I'm concerned because we are doing a very
special quilt for auction and I want it to be completed well without puckers or pleats on the back. It seems to me that we're really taking a chance on this happening when we don't baste. Am I being overly concerned about this?
Thread
Thread Starter
Forum
Replies
Last Post
Favorite Fabrics
Main
70
01-20-2012 09:47 PM
