To Set Seams or Not to Set -- The Why's and Wherefore's!!!!
05-13-2011, 06:58 AM
#14
Power Poster
Thread Starter
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,691
Originally Posted by MTS
The reason is along the same lines as the "scant" quarter-inch theory.
The thread takes up space.
So if you just sew them and press them (open or to the side), you're not getting it as flat as you can because there is a bit of a bump there from the thread.
Can you see it from the space shuttle?
No.
But try it. Take two scraps and sew them together.
Feel the thread line.
Now just take you iron and press it on the seam line.
Feel again. You can feel how it's nice and smooth.
So now when you go to press the seams (again, open or to the side depending on your preference or situation), it will be flatter.
Also, when you go press the seam to the side, you'll get less tucks and pleats. I just find they move better when the seams are set.
So set the seams, press, and this is where you can bring starch in if you want, press again.
I like my seams and blocks to be as flat as wallpaper.
As for time spent, it's negligible. ;-)
The thread takes up space.
So if you just sew them and press them (open or to the side), you're not getting it as flat as you can because there is a bit of a bump there from the thread.
Can you see it from the space shuttle?
No.
But try it. Take two scraps and sew them together.
Feel the thread line.
Now just take you iron and press it on the seam line.
Feel again. You can feel how it's nice and smooth.
So now when you go to press the seams (again, open or to the side depending on your preference or situation), it will be flatter.
Also, when you go press the seam to the side, you'll get less tucks and pleats. I just find they move better when the seams are set.
So set the seams, press, and this is where you can bring starch in if you want, press again.
I like my seams and blocks to be as flat as wallpaper.
As for time spent, it's negligible. ;-)
I won't be trying it on scraps ... will try comparisons for IRL blocks! Gives me a better sense than doing scrap tests.
05-13-2011, 07:00 AM
#15
Power Poster
Thread Starter
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,691
Originally Posted by bearisgray
Try pressing some seams "with" and "without" setting them first.
See if there if a difference.
I've never actually done that - maybe I'll go down and try it! :roll: :oops:
I usually do - it only takes a few moments longer - I'm not into production sewing - but I think the seams press "better" to one side then and I have a "flatter" and "tidier" looking seam line
See if there if a difference.
I've never actually done that - maybe I'll go down and try it! :roll: :oops:
I usually do - it only takes a few moments longer - I'm not into production sewing - but I think the seams press "better" to one side then and I have a "flatter" and "tidier" looking seam line
BTW ... I smile every time I see your kitty and it's antics!! :lol:
05-13-2011, 07:01 AM
#16
Power Poster
Thread Starter
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,691
Originally Posted by ckcowl
i always set my seams- it presses them nice and flat/smooth-helps even up any stitches that may be slightly (off) and sinks them into the fibers of the fabric so when i then press my block open (or to one side) the seam is nice-straight- and smooth. i was taught to set my seams 45 years ago= making clothing in 4-H...a habit i have never left behind.
05-13-2011, 07:03 AM
#17
Power Poster
Thread Starter
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,691
Originally Posted by MommaDorian
What does it mean to set seams? I've seen that before but I don't know what it means.
Thanks,
Dorian
Thanks,
Dorian
When you sew your two pieces together, you take it from the sewing machine and press with the iron, the way it is. Once pressed, as is, then you open it up to press your seam to the side.
05-13-2011, 07:44 AM
#18
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Originally Posted by MommaDorian
What does it mean to set seams? I've seen that before but I don't know what it means.
Jinny Beyer hand pieces her quilts, "eyeballing" the seam allowances (doesn't mark the seam allowances), and doesn't care how the seams fall when she presses her top. That is, she doesn't even care if seams are pressed symmetrically to each side; she presses from the top and just lets seams open or cross as they will. (At least, this is what she explained in a video I watched many years ago, and I have no reason to believe she has changed her methodology.)
My thinking about this is that the additional degree of exactness achieved by setting seams may end up being more theoretical than practical. It doesn't make or break a quilt. Its usefulness may depend somewhat on the thread used in piecing, making more of a difference if it's a heavier thread than a lighter weight thread. The small improvement in exactness will also have more of an effect on a pattern requiring lots of small, precise pieces; for a typical rail fence, it probably won't make any observable difference in the finished piece.
I will set seams if I am in a mood to do it, but for most of us I'm not sure if it's a really useful technique.
05-13-2011, 08:04 AM
#19
Super Member
Join Date: Feb 2011
Location: La Grande, OR
Posts: 2,457
Setting the seams gives me the control. Some things I want pressed off to one side, and others I want pressed open. That is a judgement call on my part. I want my points to be pointy, and my curves to be curvy. If I go for too long without pressing, I have this little ironing devil that sits on my shoulder that tells me I am being dumb, again. For me, setting the seams in the beginning alleviates finishing problems in the end.
05-13-2011, 08:06 AM
#20
Junior Member
Join Date: Sep 2010
Location: Alberta
Posts: 248
I never used to because I wasn't taught to (self-taught), but I recently started after some quilting friends advised me to. I noticed that it really helps set bias seams, like on HSTs, QSTs and OBWs. They don't tend to warp as much. Since I do a lot of scrap quilting and have to deal with a lot of bias seams, I always set my seams now.
Thread
Thread Starter
Forum
Replies
Last Post
AngieS
Links and Resources
11
10-07-2011 04:58 PM
