Go Back  Quiltingboard Forums > Main
Sewing Machine Question... >

Sewing Machine Question...

Sewing Machine Question...

Old 07-04-2011, 05:39 PM
  #51  
Power Poster
 
ube quilting's Avatar
 
Join Date: Jul 2010
Location: PA
Posts: 10,704
Default

I was buying a new machine 10 years ago and I haven't used any of the fancy features on it except for the lettering feature. It has a computer, embroidery attachments and many fancy stitches, etc. I only use the straight stitch, FMS, and the walking foot. Never again! I want simple!
peace :D
ube quilting is offline  
Old 07-04-2011, 07:33 PM
  #52  
Junior Member
 
Join Date: Feb 2011
Location: Iowa
Posts: 115
Default

My advise would be to try out a lot of different machines if possible. Also at Quilt shows there are usually demo of different Machines. Stay away from Dicount stores and Walmart. (you get what you pay for). It is very important to purchase close to home. Classes, repairs, and parts are a nessasary feature.Low noice level, Needle down, droped feeddogs,free classes and many differant stitches are a must. And also a very nice feature is a built-in thread cutter, that is extra nice. I have an ELNA that has that frature. I love it. I have 2 Elnas, love them both, A Bernnena, A Phaff, Viking(not so quiet),and 2 old singers.They always say, purchase the best you can afford. It will pay in the end. No discount stores!!!!
Jacqueline  m l is offline  
Old 07-04-2011, 08:00 PM
  #53  
Dee
Super Member
 
Dee's Avatar
 
Join Date: Nov 2006
Location: Pa.
Posts: 3,612
Default

I'd go and try some out. A sewing machine is an investment you have to feel a bonding with.
Dee is offline  
Old 07-04-2011, 08:03 PM
  #54  
Dee
Super Member
 
Dee's Avatar
 
Join Date: Nov 2006
Location: Pa.
Posts: 3,612
Default

I'd go and try some out. A sewing machine is an investment you have to feel a bonding with.
Dee is offline  
Old 07-05-2011, 12:41 PM
  #55  
Senior Member
 
emmah's Avatar
 
Join Date: Feb 2011
Location: Groton, NY
Posts: 408
Default

About the Kenmore you have--why not post an ISO (in search of) in the buy/sell section of this board. Someone may have a copy of the directions and also attachments they would sell you.
I would not buy a new machine till you have tried quilting with your Kenmore. Lots of people on this board end up using their vintage machines as backups cause the new GOOD machines are very pricey to buy...and to fix. Quilt for a while on the Kenmore, the old reliable, and meanwhile, try out a few machines that are in the price range you are thinking of.
I do all my piecing on a 1950's little singer 99 and my 30 year old Kenmore is fine for free motion quilting with a darning foot. I cover the feed dogs with a thin piece of plastic, and away we go. I just did a twin size quilt on it, and it worked great. It is a trusty friend, and I have never had it to a repair shop..just clean and oil it when needed.
emmah is offline  
Old 07-05-2011, 03:12 PM
  #56  
KLO
Super Member
 
Join Date: Aug 2010
Location: North Central, NC
Posts: 2,741
Default

An accomplished quilter that I met a number of years ago gave me this advise. First, find a shop(s) near enough to you that you can get help and servicing easily. Then try a few different machines out (at different shops if need be) to see what feels good to you. You may only have one shop close enough to you to do this but if you have a problem with your "new" machine and have to travel hours to take it in for servicing, you will curse the day you bought it. I have a second hand Bernina 153QE which I bought at my local shop because that's what they sold. I was using a 1970's Singer. I could not believe what this new-to-me Bernina could do and how well it sewed. I don't need too many bells and whistles so this one had enough to make me happy. Best advice .... figure out how and what you want to use a machine for and then try to buy locally. And as others mentioned, read reviews before buying. Good luck and hope you find your next "best friend"! PS: I do have a non-computerized machine also for back up in case my Bernina goes belly up. At least I can then still sew until I can get the Bernina serviced. So, keep your older machine even if you buy a new one .... just in case.
KLO is offline  
Old 07-05-2011, 06:20 PM
  #57  
Member
 
latebloomerar's Avatar
 
Join Date: Apr 2011
Location: Paragould, Arkansas
Posts: 97
Default

The way I see it is this. You can probably find the attachments for your old machine with the help of this board, but if your yearning is for a new machine, look for features.

For quilting
- the ability to drop feed dogs is a must for free motion quilting
- can the needle up / down position be set
- an on / off switch to either use the pedal or not
- can you find a walking foot for it
- are you wanting a bigger harp

Once you have all that figured out then find out what brands the dealers in your area have. Because you will be restricted to the brands they sell if you want their help and the services they supply.

I bought a cheapie Janome 8050 from Hancocks but I know not to expect any help from them if there is a problem with the machine. Luckily there has not been a problem and it is so much nicer than my old Singer decorative touch machine that it is like night and day. I intend to keep this machine and take it to guild, after I buy my dream machine which is a 6600p.

Beware, prices vary radically. My local dealer has the machine for 1699.00 but I called a dealer in Memphis that said that they would sell it for 1399.00 regular price so I have the big decision of do I drive the 80 miles to Memphis or buy locally. Lots of decisions.....
latebloomerar is offline  
Old 07-06-2011, 06:19 AM
  #58  
Senior Member
 
MarieM's Avatar
 
Join Date: Mar 2010
Location: Livingston, MT
Posts: 427
Default

Latebloomerar,

I would recommend you talk to your local dealer to see if they are planning a sale anytime. I would be honest and say that the machine is available in Memphis for $300 less, they may not be able to come down the entire $300 but them may be able to do something. Also ask if there is a discount if you write a check/pay cash or use a credit card. I know our LQS will frequently give a 5% discount on machines if you don't pay w/credit card. The reason I would recommend local is for service, not to mention supporting your local economy and keeping your tax money w/in your state. What is the AR tax rate? TN is 9.25% (or was when I lived there) so you should consider that as well.

Hope this helps.

Marie
MarieM is offline  
Old 07-06-2011, 08:04 AM
  #59  
Member
 
latebloomerar's Avatar
 
Join Date: Apr 2011
Location: Paragould, Arkansas
Posts: 97
Default

That is my intention, that is as soon as I can have cash in hand to pay for it. :wink:
latebloomerar is offline  
Old 07-06-2011, 08:12 AM
  #60  
Super Member
 
Join Date: Apr 2007
Location: North Carolina - But otherwise, NOTW
Posts: 7,940
Default

If you want a relatively inexpensive but good machine for piecing, I recommend my Brother SQ9000, which has decorative stitches and comes with quilting attachments. It only costs $199 at WalMart. Brother machines are well made and just run and run and run.
jljack is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Central Ohio Quilter
For Vintage & Antique Machine Enthusiasts
37
08-06-2017 06:38 PM
mind over matter
For Vintage & Antique Machine Enthusiasts
3
02-25-2015 07:01 AM
Alawai
For Vintage & Antique Machine Enthusiasts
39
12-29-2014 08:25 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter