So frustrated! Why wont my machine do freemotion correctly
10-07-2011, 01:37 PM
#31
Super Member
Join Date: Jun 2010
Location: Michigan
Posts: 2,451
What kind of thread are you using? Not a metalic I hope that is very hard to stipple with. In addtion, when you have a bobbin nesting problem look to the top thread. RPM or speed up on machine and slow movement with your hands remember to breath. calla
10-07-2011, 03:08 PM
#33
Power Poster
Join Date: Jun 2011
Location: Southern California
Posts: 19,131
Originally Posted by Nanasrcool
I am new to quilting. I finished my quilt top and it turned out great. I wanted to do some freemotion stippling on the outer perimeter and watched video after video and even read a few books. I started practicing. EVERY time the same thing. The top thread ends up with a huge nest on the underside of the quilt. Even at best I have a large loose loop of the top thread on the bottom. I have adjusted the tension in small amounts from +3 to -3 and NOTHING has helped. I have left the feed dogs up (have a supreme slider in place so it wont move the fabric) because one instructor said this might help and it made no difference. I have a singer 7426. Does anyone else this model or a singer that can help me shed some light on a solution here. There is no way to adjust anything on here but thread tension, stitch length and needle placement. I have tried matching threads in top and bottom, using poly thread on top and bottom. I just have no idea what I am doing so wrong. PLEASE HELP ME! Till now my experience with quilting has been such a positive one. But I am so stuck. There is a DVD that helps but I am not going to buy one that will simply tell me the same things I have already been told in the utube instructions and then have the added frustration of having paid money I dont have and STILL be stuck.
10-07-2011, 04:12 PM
#34
Super Member
Join Date: Nov 2010
Location: Mars
Posts: 2,549
Originally Posted by EasyPeezy
Am I missing something here? I don't see anywhere to Edit title or Edit Subject even if I go to one of my own topics.
One of my topics with link circled:
[ATTACH=CONFIG]267652[/ATTACH]
10-08-2011, 04:38 AM
#38
Member
Join Date: Aug 2010
Posts: 9
I was having nests, too. I found it helped to not only make sure the needle was ready, but to hand-tighten the top thread before starting again. This does get boring to keep repeating, but it did help! Good luck, and keep at it! :) The practice sandwich is a good idea. :)
10-08-2011, 04:45 AM
#39
Senior Member
Join Date: Dec 2010
Location: Newalla, Oklahoma
Posts: 632
What type of foot are you using? I usually use the open toe round quilting foot but maybe you need the bigger foot to hold the fabric in place. They also make a quilting need that has a spring on it to help hold fabric in place. Also, make sure you are using a sharp (not universal point) needle. I tend to use a needle in a larger size like a size 16 jeans needle or a needle marked as a quilting needle. These tend to have a sharper point and a larger eye and groove to allow the thread to pass through any layers. The needle can be a size 12 as long as it says sharp not universal. The universal needles are more rounded on the tip.
10-08-2011, 05:30 AM
#40
Senior Member
Join Date: Nov 2010
Location: Illinois & Wisconsin
Posts: 824
Originally Posted by QuiltnNan
if the nesting is sporatic, it's possible that your thread is not feeding smoothly. perhaps a thread net over the spool would help.
Thread
Thread Starter
Forum
Replies
Last Post
Lady_Bird777
For Vintage & Antique Machine Enthusiasts
16
06-18-2018 04:46 AM
Snorky Lvs2Quilt
Main
16
04-21-2011 09:57 PM
