Go Back  Quiltingboard Forums > Main
So frustrated!  Why wont my machine do freemotion correctly >

So frustrated! Why wont my machine do freemotion correctly

So frustrated! Why wont my machine do freemotion correctly

Old 10-08-2011, 05:36 AM
  #41  
Junior Member
 
sharkee's Avatar
 
Join Date: Nov 2010
Location: Rifle, Colorado
Posts: 213
Default

I had that problem with my first quilt and I took it to the LQS and they looked and it and told me I was using the wrong needle. I changed the needle to a 90/14 topstitch needle and it was much better, the rest they told me was just going to take practice with stitch length and speed. It is getting better with each quilt I do.

Good luck
sharkee is offline  
Old 10-08-2011, 05:42 AM
  #42  
Super Member
 
Sunnie's Avatar
 
Join Date: Aug 2011
Location: Morgantown, PA area
Posts: 1,247
Default

I was that other person with the same issue. I received lots of great suggestions at this link:

http://www.quiltingboard.com/t-157052-1.htm

However, it didn't solve my problem with my BabyLock. I switched to my Janome and have had great success. But I had to set the machine to a slower speed and move slowly and smoothly (apparently jerky movements create some of the loopies.)

Good luck.
Sunnie is offline  
Old 10-08-2011, 05:57 AM
  #43  
Junior Member
 
Join Date: Dec 2010
Location: Sioux City, Iowa
Posts: 117
Default

[quote=thepolyparrot]Are you sure you're putting the presser foot down? (I miss this occasionally and this is the symptom I get)[/quo
tweezy50 is offline  
Old 10-08-2011, 05:57 AM
  #44  
Super Member
 
Join Date: Mar 2011
Location: Maryland
Posts: 2,575
Default

Thank you! Thank you! Thank you! to whoever posted the original question and all of those kind enough to reply.
...and I thought I knew my machine upside down, inside out, and every which way!!!
QuiltMom2 is offline  
Old 10-08-2011, 06:19 AM
  #45  
Super Member
 
Join Date: Jun 2010
Location: Springfield, Ohio
Posts: 5,446
Default

Is there a dealer close by that you could consult for help?
grannypat7925 is offline  
Old 10-08-2011, 06:27 AM
  #46  
Senior Member
 
Join Date: Apr 2011
Location: Texas
Posts: 429
Default

Search FMQ on this board. There is some awesome advise here that helped me overcome the exact frustration you are having. I have a different machine than yours, but I can tell you this ... If the thread loops on the bottom, your top tension needs to be increased. If the thread loops on top, your top tension needs to be decreased. Very seldom do you need to adjust your bobbin tension. Use the same thread in top and bobbin. Do not use cheap thread. Use a brand new needle. Look for lint in and around your bobbin case. Make a sandwich of exactly the same quilt fabrics and practice! You'll get it and it's SO WORTH THE EFFORT! Don't forget to breathe!
LindaDeeter is offline  
Old 10-08-2011, 06:31 AM
  #47  
Super Member
 
Dolphyngyrl's Avatar
 
Join Date: Jan 2009
Location: Southern California
Posts: 6,254
Default

Did you pull your bobbin thread to the top and stitch in place, nests get created if you don't do this. Might help to take a class so your instructor can help you specifically with your machine. It's hard to say what you are doing wrong without watching you. You could be moving too slow, moving too fast, etc.......
Dolphyngyrl is offline  
Old 10-08-2011, 06:55 AM
  #48  
Member
 
Join Date: May 2010
Location: Ft. Myers, FL
Posts: 35
Default

[quote=Nanasrcool]I am new to quilting. I finished my quilt top and it turned out great. I wanted to do some freemotion stippling on the outer perimeter and watched video after video and even read a few books. I started practicing. EVERY time the same thing. The top thread ends up with a huge nest on the underside of the quilt. Even at best I have a large loose loop of the top thread on the bottom. I have adjusted the tension in small amounts from +3 to -3 and NOTHING has helped. I have left the feed dogs up (have a supreme slider in place so it wont move the fabric) because one instructor said this might help and it made no difference. I have a singer 7426. Does anyone else this model or a singer that can help me shed some light on a solution here. There is no way to adjust anything on here but thread tension, stitch length


Always set your stitch length to "0". Your machine is putting out too much thread for each stitch. Once you set your stitch to 0 recheck your tension. But if you forget to lower you pressure foot that too will mess up your stitches big time.
flawhoopi is offline  
Old 10-08-2011, 07:00 AM
  #49  
Super Member
 
Join Date: Jul 2010
Location: Ohio
Posts: 2,148
Default

Originally Posted by #1piecemaker
Rethread your whole machine and see if that helps. Sometimes the problem is so obvious, but yet hidden.
When you rethread your machine make sure that the presser foot is up. If it down the thread will not seat correctly in the tension wheels so the machine will not sew right. A check for this is to put the presser foot down after you have rethreaded and gently pull the thread. The needle should bend slightly. If it does then the threrad in is the tension wheels correctly. If not it is not so rethread the machine.
bigsister63 is offline  
Old 10-08-2011, 07:12 AM
  #50  
Member
 
quiltbea's Avatar
 
Join Date: Oct 2011
Location: Maine
Posts: 70
Default

Saw your nearly-finished photo. The project is wonderful. You are off to a good start.
I'm so glad you were helped by the quilters on this board. Everyone is so kind and if one thing doesn't work, another usually does.
As for FMQ....when I started out someone told me to sing or hum Camptown Races while I quilted. It helped with the movement of quilt and needle. The needle has to move faster than the quilt itself.
Good luck and keep practicing.
quiltbea is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lady_Bird777
For Vintage & Antique Machine Enthusiasts
16
06-18-2018 04:46 AM
vicki75
Main
16
10-11-2011 08:24 PM
Snorky Lvs2Quilt
Main
16
04-21-2011 09:57 PM
sunnyhope
Main
18
09-14-2009 07:48 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter