Question on thread tension on machine quilting
#1
Senior Member
Thread Starter
Join Date: Jan 2012
Posts: 319
Question on thread tension on machine quilting
Can any of you quilters tell me why sometimes when a quilt is done on a professional long arm machine why the tension comes back wrong on parts of the quilt? Is this a hard thing to control? This quilt shop has a tension regulator on this machine. Thanks.
#2
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,538
Sometimes a different fabric on the top can mess up the tension on the back. If you mix regular quilting cotton with batiks, they will quilt differently. Sometimes if there are a lot of seam allowances that the machine goes over it can throw off the tension too.
#3
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,558
All sewing machines have a tension regulator. Do you mean a stitch regulator?
Stitch regulators keep the stitches at the same length regardless of how fast the machine is moving.
If your quilt has loose threads or looping on the back, it could be because of different fabrics, as Tartan said. Have you shown the sections in question to your longarmer?
Stitch regulators keep the stitches at the same length regardless of how fast the machine is moving.
If your quilt has loose threads or looping on the back, it could be because of different fabrics, as Tartan said. Have you shown the sections in question to your longarmer?
#4
Power Poster
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
They probably have a Towa Bobbin tensioner. This sets the tension on a bobbin, but when it's off the machine. If different parts of the quilt are pieced with different fabrics or lots more piecing in one area than another, then this can throw the tension off. If there's no fabric differences, then is the tension off on just curves? This might mean that they are going too fast on them. With some stitch regulators, you still can't go from zero to 60. May need to slow down on some of the curves.
I agree with Peckish about taking the quilt back to the long armer and asking.
I agree with Peckish about taking the quilt back to the long armer and asking.
#5
Senior Member
Thread Starter
Join Date: Jan 2012
Posts: 319
I meant to say stitch regulator, instead of tension regulator.
This particular quilt (that I picked up yesterday from the quilting shop after it was quilted) was very simple piecing.
It was a baby quilt, and basically it had one large center piece with a border of a different color, and on the back the colors were reversed---large center piece and border on the side. It was machine quilted all over with the same pattern, circle with stars in the middle. For some reason, the stitching was off on the brown fabric much more consistently than the pink fabric. I have seen this on some other quilts that I have had professionally quilted, and I hoped that I can get this resolved for the future. Didn't know if it was the patterns I was choosing, or the speed the long arm quilter was using, and something else. Do any of you have this issue very often? Thank you for your suggestions. PaperPrincess, you commented this sets the tension on the bobbin, but when it's off the machine. I am not sure what you meant by the last part of the sentence. Thanks.
This particular quilt (that I picked up yesterday from the quilting shop after it was quilted) was very simple piecing.
It was a baby quilt, and basically it had one large center piece with a border of a different color, and on the back the colors were reversed---large center piece and border on the side. It was machine quilted all over with the same pattern, circle with stars in the middle. For some reason, the stitching was off on the brown fabric much more consistently than the pink fabric. I have seen this on some other quilts that I have had professionally quilted, and I hoped that I can get this resolved for the future. Didn't know if it was the patterns I was choosing, or the speed the long arm quilter was using, and something else. Do any of you have this issue very often? Thank you for your suggestions. PaperPrincess, you commented this sets the tension on the bobbin, but when it's off the machine. I am not sure what you meant by the last part of the sentence. Thanks.
#6
Senior Member
Thread Starter
Join Date: Jan 2012
Posts: 319
The stitches are off are on the back; they are on straight seams and curves. This particular machine quilting pattern does have a lot of curves because of all the circles. Thanks again for any advice you have for me.
#7
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,558
She means the tension is set in the bobbin case when the bobbin is not inside the machine. The bobbin and bobbin case are taken out of the machine and set into the gauge. Once the tension is read and set, the bobbin and case are put back into the machine. I personally don't think this has anything to do with what's going on with your quilt.
I have a few questions: Is the brown fabric a batik? You say this has happened before on other quilts, was it the same longarm quilter? Did you show her those quilts and ask about the problem? Can you post a picture of the problem areas?
I have a few questions: Is the brown fabric a batik? You say this has happened before on other quilts, was it the same longarm quilter? Did you show her those quilts and ask about the problem? Can you post a picture of the problem areas?
#8
Senior Member
Thread Starter
Join Date: Jan 2012
Posts: 319
I forgot to say both the brown and pink are 100% cotton fabric.
Can a thicker or thinner batting have anything to do with the tension issue?
Usually I have the long arm quilter use Quilters Dream Cotton Select, and occasionally I have use that same brand in Deluxe (which is a little thicker). This particular time that the tension was off was on the select.
Can a thicker or thinner batting have anything to do with the tension issue?
Usually I have the long arm quilter use Quilters Dream Cotton Select, and occasionally I have use that same brand in Deluxe (which is a little thicker). This particular time that the tension was off was on the select.
#9
Senior Member
Thread Starter
Join Date: Jan 2012
Posts: 319
Peckish,
The brown fabric was not a batik. It is the same longarm quilter. I have mentioned this problem to her before. She wasn't sure what caused it---thinking maybe it was the pattern. I am not sure how to post a picture. Can you tell me how? Thanks.
The brown fabric was not a batik. It is the same longarm quilter. I have mentioned this problem to her before. She wasn't sure what caused it---thinking maybe it was the pattern. I am not sure how to post a picture. Can you tell me how? Thanks.
#10
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,558
There's a couple of ways to post a picture. This is the easiest way - see if you can click and drag the picture into your dialogue box where you type responses. Make sure the picture is 1 mb or smaller.
Thread
Thread Starter
Forum
Replies
Last Post