Taking thread off the sewing machine
10-18-2011, 06:42 AM
#11
Super Member
Join Date: Jan 2011
Location: Clarksville, TN
Posts: 1,049
I was told this when I got my babylock. Honestly I found it absurd, but smiled and nodded anyway.
If the foot is up and the disks are not engaged then it wouldn't matter which way I pull the thread!!
I have had my machine for 3 years, I have never cut and pulled forward.
My tension is as good as it ever was.
If the foot is up and the disks are not engaged then it wouldn't matter which way I pull the thread!!
I have had my machine for 3 years, I have never cut and pulled forward.
My tension is as good as it ever was.
10-18-2011, 06:46 AM
#12
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Follow your dealer's instructions, not what people here say. Your dealer is going to be the one honoring (or not) your warranty on the machine. Any newer computerized sewing machine owner will be told NOT to pull the thread out backwards. And I surely wouldn't tell you otherwise and risk the longevity of your machine.
10-18-2011, 07:33 AM
#14
Power Poster
Join Date: Mar 2011
Location: western NY formerly MN, FL, NC, SC
Posts: 51,433
Originally Posted by Scissor Queen
Personally I think if a machine is so delicate you can't pull the thread out backwards you probably don't want it. I've been pulling the thread out backwards on my Pfaff for over 10 years. When the presser foot is up, the tension disks are open and the thread is loose.
10-18-2011, 07:44 AM
#15
Senior Member
Join Date: Jun 2010
Location: Greenville, OH
Posts: 359
It seems like I read something about this a while back. The advice was to be sure to lift the presser foot as this releases the tension discs in the machine.
I always pull my thread out holding on the spool but I always have the presser foot up when I do this.
Chris
I always pull my thread out holding on the spool but I always have the presser foot up when I do this.
Chris
10-18-2011, 07:48 AM
#16
Senior Member
Join Date: Jun 2010
Location: Greenville, OH
Posts: 359
It seems like I read something about this a while back. The advice was to be sure to lift the presser foot as this releases the tension discs in the machine.
I always pull my thread out holding on the spool but I always have the presser foot up when I do this.
Chris
I always pull my thread out holding on the spool but I always have the presser foot up when I do this.
Chris
10-18-2011, 08:19 AM
#17
Super Member
Join Date: Nov 2010
Location: MS
Posts: 2,624
I've read this on several of my embroidery sites regarding my Brother embroidery machines. I clipped my thread at the spool and pull forward. Yes, it waste thread but I do it anyway. I may have been told this by my repair tech...can't remember now!
I also clean my tension discs with "unwaxed" dental floss...very hard to find but I did get it at Walgreen's.
I also clean my tension discs with "unwaxed" dental floss...very hard to find but I did get it at Walgreen's.
10-18-2011, 09:57 AM
#18
Banned
Join Date: Dec 2010
Location: Colorado
Posts: 1,376
The guy who maintains my machines told me to snip the thread at the spool and pull it out through the needle. He said if there is a little lint in the area of the tension discs it could lodge the lint in the tension assembly to where I can't get it out if I pull the thread backwards through the machine.
10-18-2011, 10:20 AM
#20
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
It just reduces the chances of lint lodging in the tension mechanism. Thread is spun with directionality. Rubbing it against the grain will dislodge more lint than rubbing with the grain.
Actually, the same applies to bobbin thread -- long lengths should not be pulled backwards through the tensioning system. In that case, I think the bigger risk is eventually scoring the metal.
I don't find it any more difficult to snip thread first, so I just made it a habit to always pull thread through with the grain.
Hand quilters are taught to thread their needle with the grain of the thread (knot goes at spool end of the cut thread). This also is because friction is reduced if you pull thread through fabric with the grain of the thread instead of against the grain of the thread.
Actually, the same applies to bobbin thread -- long lengths should not be pulled backwards through the tensioning system. In that case, I think the bigger risk is eventually scoring the metal.
I don't find it any more difficult to snip thread first, so I just made it a habit to always pull thread through with the grain.
Hand quilters are taught to thread their needle with the grain of the thread (knot goes at spool end of the cut thread). This also is because friction is reduced if you pull thread through fabric with the grain of the thread instead of against the grain of the thread.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
5
06-09-2011 06:27 AM
