Go Back  Quiltingboard Forums > Main
Technique help:   Applique circles   Not fusable >

Technique help: Applique circles Not fusable

Technique help: Applique circles Not fusable

Old 05-17-2019, 03:49 PM
  #11  
Super Member
 
Join Date: Dec 2010
Location: Michigan
Posts: 3,334
Default

One of the things I've done when I didn't have any mylar is to make a thick template using freezer paper. I iron 3 or 4 layers together and then cut my shape. You can do the running thread thing, spray starch and then remove the template.

I like the method where you sew backing fabric around the circle, then cut a slit in the backing fabric and turn it inside out. There are lots of ways to make applique circles that don't cost much of anything.
nanna-up-north is offline  
Old 05-17-2019, 09:21 PM
  #12  
Super Member
 
Join Date: Oct 2012
Location: Twin Cities, MN
Posts: 2,487
Default

I absolutely love Karen Kay Buckley's perfect circles! They are heavy, and stand up to high heat. I tried making my own out of mylar, but they warped and melted. I also tried freezer paper, but when I made my circles I used starch and heat, and the freezer paper seemed to lose it's "edge" from the spray starch. I ordered Karen's circles, and love the way they turned out. I'm finishing up my version of a Country Whig Rose quilt that has 104 turned edge circles on it.
Anniedeb is offline  
Old 05-18-2019, 03:31 AM
  #13  
Super Member
 
Join Date: Feb 2011
Location: Yorkville, IL
Posts: 7,639
Default

I use Karen Kay Buckley’s and love them
luvstoquilt is offline  
Old 05-18-2019, 03:42 AM
  #14  
Super Member
 
Kassaundra's Avatar
 
Join Date: Sep 2014
Location: Rural Oklahoma
Posts: 5,374
Default

I use multiple layers of freezer paper to make my circle templates, and compass or protractor I forget which it is called has a pivot point and a place for a pencil. I do a lot of circles. I also do a reverse applique if the backing isn't going to be pieced. I use freezer paper for that too. Press it to the back of the fabric (background) cut a hole out of the middle of the circle spot leaving about 3/8 to 1/2 inch, notch it all the way around press the tabs back to form a folded edge, let it cool then remove the freezer paper, place it over the "circle" fabric use a little stick glue to hold things in place long enough to stitch around the edge. That way there is no "bulk" under the edge on your circle.
Kassaundra is offline  
Old 05-18-2019, 05:10 AM
  #15  
Super Member
 
citruscountyquilter's Avatar
 
Join Date: Mar 2013
Location: Hernando FL
Posts: 1,662
Default

I use either Karen Kay Buckley circles or make my own using heat resistant template plastic. It is difficult to cut smooth edge on circles, especially the smaller ones, so I use a nail file to smooth out the little peaks that happen when you cut.
I make my fabric circle a little larger than my template and do a running stitch around. I then use a small paint brush to brush starch on the edges and then draw the edges up by pulling on the thread. Press with a hot iron, pop out the template when dry and perfect circle.
citruscountyquilter is offline  
Old 05-18-2019, 05:10 AM
  #16  
Power Poster
 
nativetexan's Avatar
 
Join Date: Feb 2009
Location: home again, after 27 yrs!
Posts: 19,388
Default

if you get Mylar, be sure it is heat proof. good luck on your circles. they can be fun.
nativetexan is offline  
Old 05-18-2019, 05:15 AM
  #17  
Senior Member
 
Join Date: Sep 2010
Location: Delaware
Posts: 940
Default

I use empty cereal boxes, cut the size circle I want, usually determined by the size saucers,plates, etc, cover in foil. Cut your fabric 1/4" - 1/2" larger than the cir le you want to make, run a line of basting stitches around the outside of fabric. Once you have your basting done, place onto foil covered circle and draw up thread snugly and press. I leave basting thread in until partially sewn down. Has work well for me for years. Whatever way you choose, have fun with it!
Lena1952 is offline  
Old 05-18-2019, 07:47 AM
  #18  
Power Poster
 
Join Date: Jan 2011
Location: Southern USA
Posts: 15,895
Default

Once I started using Appliquick tools and techniques I won't do applique any other way. I get perfect circles from 1/4" round to as big as I want. The tools are excellent. I use stabilizer instead of fusible for most of the applique.

https://www.youtube.com/watch?v=PoQdaN6hfUI

Last edited by Onebyone; 05-18-2019 at 07:51 AM.
Onebyone is offline  
Old 05-19-2019, 02:18 AM
  #19  
Junior Member
 
nantucketsue's Avatar
 
Join Date: May 2007
Location: West Yorkshire ,England
Posts: 239
Default

I save the cardboard circles from the tops of frozen ice cream cones as templates.
nantucketsue is offline  
Old 05-19-2019, 03:07 AM
  #20  
Senior Member
 
Join Date: Sep 2011
Location: Burke, Va
Posts: 344
Default

Olfa circle cutter. Perfect circle cutter up to 8 1/2 inch circles.
mengler is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jo Belmont
Links and Resources
5
04-16-2018 05:45 AM
virtualbernie
Pictures
172
12-18-2012 07:34 AM
lizzy
Pictures
36
02-03-2012 03:12 PM
tammy cosper
Pictures
19
06-13-2011 08:40 PM
craftybear
Links and Resources
2
05-13-2011 08:50 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter