there must be a better way!!!
10-13-2012, 07:32 PM
#1
Senior Member
Thread Starter
Join Date: Feb 2012
Location: Winston-Salem NC
Posts: 659
there must be a better way!!!
Aaaagh!
I have spent hours tonight burying threads, and I am still not done! I am doing a small quilt with a quilt pattern on the wholecloth "back", not the pieced "front". It is a complicated design, with overlapping motifs and multiple thread colors (underwater scene with corals and fish and whatnot). I generally prefer not to finish a thread by sewing in place for a few stitches and then cutting it off close to the quilt surface, because I find that I end up with small but noticeable bumps --- which become especially noticeable when you have fifty million of them, because the quilt surface starts to feel like a pillled sweater!
So instead I am tying itty bitty knots, feeding the needle into the sandwich, pulling the knot through, cutting the tail short, and slipping it under with needle.
Is there another way?
Alison-Going-Cross-Eyed
I have spent hours tonight burying threads, and I am still not done! I am doing a small quilt with a quilt pattern on the wholecloth "back", not the pieced "front". It is a complicated design, with overlapping motifs and multiple thread colors (underwater scene with corals and fish and whatnot). I generally prefer not to finish a thread by sewing in place for a few stitches and then cutting it off close to the quilt surface, because I find that I end up with small but noticeable bumps --- which become especially noticeable when you have fifty million of them, because the quilt surface starts to feel like a pillled sweater!
So instead I am tying itty bitty knots, feeding the needle into the sandwich, pulling the knot through, cutting the tail short, and slipping it under with needle.
Is there another way?
Alison-Going-Cross-Eyed
10-13-2012, 08:05 PM
#2
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
If you're not using a cheater needle already, check out this video by Leah Day:
http://freemotionquilting.blogspot.c...g-threads.html
Instead of sewing in place, I sew 3 to 5 teeny tiny stitches to start and stop. These stitches are maybe 2 to 3 mm long and don't create the "bump" that happens when the stitches are right on top of each other. These tiny stitches are very secure.
http://freemotionquilting.blogspot.c...g-threads.html
Instead of sewing in place, I sew 3 to 5 teeny tiny stitches to start and stop. These stitches are maybe 2 to 3 mm long and don't create the "bump" that happens when the stitches are right on top of each other. These tiny stitches are very secure.
10-13-2012, 10:29 PM
#4
Super Member
Join Date: Aug 2010
Location: Piedmont Virginia in the Foothills of the Blue Ridge Mtns.
Posts: 8,562
I begin my machine quilting line by taking one stitch, then pulling the bobbin thread to the front before taking 4-5 tiny stitches, then dialing to the regular stitch length.
I end the line of quilting by taking those same 4-5 tiny stitches, lifting the presser foot, moving the quilt out from under the needle 8-10", first cutting the bottom threads under the quilt, THEN cutting the threads on the front/top of the quilt AFTER I've given the bobbin thread a little tug to pull the last bobbin thread stitch thru to the top - it's just a little 'bump' feeling - and then cutting the front threads.
This seems to eliminate thread clumps on the back of the quilt for me.
Jan in VA
I end the line of quilting by taking those same 4-5 tiny stitches, lifting the presser foot, moving the quilt out from under the needle 8-10", first cutting the bottom threads under the quilt, THEN cutting the threads on the front/top of the quilt AFTER I've given the bobbin thread a little tug to pull the last bobbin thread stitch thru to the top - it's just a little 'bump' feeling - and then cutting the front threads.
This seems to eliminate thread clumps on the back of the quilt for me.
Jan in VA
10-14-2012, 05:54 AM
#6
Super Member
Join Date: Oct 2010
Location: Fox Valley Wisconsin
Posts: 1,920
Also do the same as JaninVA...I was taught not to do the stitching in one place (which is what machines that have a "lockstitch" do). The stitching very small stitches is much more secure, and doesn't make the bumps.
10-14-2012, 06:19 AM
#7
Super Member
Join Date: Jan 2011
Location: Knot Merrill, Southern Indiana
Posts: 5,781
I tried burying threads and did not think it was worth it - especially when I had a lot of starts/stops. I do a method similar to what Jan described.
If you are committed to burying them though, there is a great cheater needle on the market that I recommend. It's not the Clover - that one works by *popping* the thread through a tight gap in the top of the needle, I've broken too many threads with those needles.
Try the "Spiral Eye" needle - they are great! I use them for almost everything now.
http://www.spiraleyeneedles.com/
Sometimes when you can make just one little part of a big chore easier (threading the needles - especially when you are using short threads already connected to the quilt), the whole chore becomes that much easier.
If you are committed to burying them though, there is a great cheater needle on the market that I recommend. It's not the Clover - that one works by *popping* the thread through a tight gap in the top of the needle, I've broken too many threads with those needles.
Try the "Spiral Eye" needle - they are great! I use them for almost everything now.
http://www.spiraleyeneedles.com/
Sometimes when you can make just one little part of a big chore easier (threading the needles - especially when you are using short threads already connected to the quilt), the whole chore becomes that much easier.
10-14-2012, 07:12 AM
#8
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,693
Originally Posted by patchsamkim
Also do the same as JaninVA...I was taught not to do the stitching in one place (which is what machines that have a "lockstitch" do). The stitching very small stitches is much more secure, and doesn't make the bumps.
When you pull the bobbin thread thru to the top, hold the end of both threads taut as you do those first few stitches then continue on. Likewise at the end for the stop point. That way you can keep an eye on all the thread ends.
Then later I sit down and tie the ends off, and bury the threads ... with a good movie, it goes fast!
10-14-2012, 07:29 AM
#9
Power Poster
Join Date: Jan 2009
Location: Front row
Posts: 14,646
If the quilt is not for a show, I make several tiny stitches and then hit the thread cutter button and snip the ends to the stitch. If the quilt will be going in a show or will be inspected up close I leave a long tail and bury each one after the third cut. I don't wait to bury all of them at one time.
10-14-2012, 07:43 AM
#10
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,453
I have the easy thread needles from Walmart. You pop the threads straight down and you don't have to thread the eye. Another trick I do, as I finish an area of quilting and get ready to adjust my quilt...I take a minute to check my thread tension on the quilt back and bury the knots on that section before continuing. It helps not to have to do the whole quilt when you get done.
Thread
Thread Starter
Forum
Replies
Last Post
