thread breaking on a collage quilt
#1
Member
Thread Starter
Join Date: Oct 2012
Posts: 2
thread breaking on a collage quilt
Any advice on how to stop my thread from breaking while I am longarming a Laura Heine collage quilt? There are times my needle will not pick up the bobbin thread. I literally have to take use my up/down button to stitch. One stitch, move the head, take another stitch. Take a few stitches then the thread breaks. Steam-a-seam 2 lite was used as the fusible webbing. I've tried lubricating my needle. Worked for awhile but now it's not.
#2
Power Poster
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
Make sure you don't have the quilt on the frame too tightly. That can sometime cause skipped stitches & thread breakage. What size needle are you using? Poly or cotton thread?
I've also read about a Sharon Schamber hint: "Sharon dips a spool of thread into a jar of mineral oil, takes it right out, dries it with a paper towel, and it is immediately ready to use. " I found this quote here
http://westmichquilter.blogspot.com/...-schamber.html
but have read about it in several locations
Welcome to the board!
I've also read about a Sharon Schamber hint: "Sharon dips a spool of thread into a jar of mineral oil, takes it right out, dries it with a paper towel, and it is immediately ready to use. " I found this quote here
http://westmichquilter.blogspot.com/...-schamber.html
but have read about it in several locations
Welcome to the board!
#6
Member
Thread Starter
Join Date: Oct 2012
Posts: 2
I used Mettler 100% cotton 50 and also used Sewers Aid to no avail. I found a 22 Groz-Beckett needle in my stash and tried it. Worked! I've done many appliqued quilts and this is the first time I've had to use such a large needle. Good to know for future reference.
#7
Has anyone used that magnetic thread lubricant device that Sail Rite recommends to use with Sewer's Aid?
https://www.sailrite.com/Magnetic-Thread-Lubricator
I thought it looked like it might be handy?
https://www.sailrite.com/Magnetic-Thread-Lubricator
I thought it looked like it might be handy?
Thread
Thread Starter
Forum
Replies
Last Post