Go Back  Quiltingboard Forums > Main
Tin Lizzie 18LS >

Tin Lizzie 18LS

Tin Lizzie 18LS

Old 05-28-2012, 04:07 PM
  #1  
Member
Thread Starter
 
Join Date: Feb 2011
Location: Michigan
Posts: 73
Wink Tin Lizzie 18LS

I trust all my fellow quilters on this board and know you will help me out.
I feel like an expectant mother and need some help.
I have a chance to purchase a used Tin Lizzie 18LS. I really need some info on this machine.
Does anyone have any opinions? Is it a good machine. Any problems I need to know about
to help make my decision to take the plunge??? The owner stated no problems - she is the original
owner and has had it for 2 years.
Quiltcamp is offline  
Old 05-28-2012, 04:11 PM
  #2  
Super Member
 
knlsmith's Avatar
 
Join Date: Jan 2010
Location: West central Illinois
Posts: 2,919
Default

I have this model and love it. There is a learning curve for all LA machines, however, so don't rush yourself if things aren't perfect. It has been a perfect beginner machine for me. I have had it about 2 1/2 years and am hoping to sell it and upgrade to a computerized machine this summer.
knlsmith is offline  
Old 05-28-2012, 04:50 PM
  #3  
Super Member
 
Ruby the Quilter's Avatar
 
Join Date: Dec 2010
Location: Far Far West Texas
Posts: 1,401
Default

I have one and it's great. Like any thing occasionally we have had to trouble shoot it and there is some great information on tension somewhere on this board. I printed off months ago and it really helped. Hopefully who shared the tension information will respond.
Ruby the Quilter is offline  
Old 05-28-2012, 07:02 PM
  #4  
Power Poster
 
Join Date: Jan 2011
Location: Upland CA
Posts: 18,376
Default

I have the viking 18x8 which is the same machine and I really love it!!!! There is a great video on the tension on you tube.
mighty is offline  
Old 05-29-2012, 12:15 AM
  #5  
Super Member
 
Join Date: Jul 2009
Location: Small town south of Ottawa, Ontario
Posts: 1,692
Default

It is a fabulous machine. As stated, there are learning curves, as with any machine, DMS or LA. I have had mine for a year now and LOVE it. The only tension problem I had was from dropping the bobbin racer on the floor a couple of times and bending it. Once my DH straightened it for me, I have had no further problems. As I get ready to start a new quilt, there are three basic steps that I do:
1: Kill all dust bunnies, including on the rails.
2: Oil the machine
3: Do the yo-yo test for the bobbin.

Watch all available videos here: http://tinlizzie18.com/service-and-support/
Read this section of the owners manual that shows the yo yo test for the bobbin tension:
Check the tension of the bobbin by holding the
loaded bobbin case in one hand. With one hand
under the bobbin case, hold the tail of thread and
watch as the thread flows out of the bobbin case.
A slight bounce should cause the bobbin case to
slide down the thread. If the thread slides out of
the case as you pick it up, it needs more tension.
If it barely moves down the thread or doesn’t move
at all, it needs less tension.
Use a small screwdriver to turn the largest set screw on the
bobbin case to adjust tension. Make very, very small adjustments.
Be very careful not to remove the screw as it is very small and
difficult to find if lost. Remember, righty (clockwise) tighty, lefty
(counter clockwise) loosey.
To place the bobbin into the machine:
1. Insert the bobbin into the bobbin case.
2. Holding the bobbin case pull the thread through the slot.
3. Draw the thread down and under the spring, making sure
the thread is in the highest position of the bobbin case.
4. Place the bobbin case in the machine. Always listen for
the pop as it engages in the machine.
We suggest using a soft bristle brush to wipe out the bobbin case
and the bobbin area. Canned air only blows the lint around. By
using the soft bristle brush you collect the dust on the brush.
Each day before you start quilting, unthread your machine past
the take up lever and remove the bobbin case, place a small drop
of oil in the bobbin hook area before you begin quilting. This will
clean out the fuzz and lint. Place a drop of oil in the bobbin hook
area. Turn your machine on to run at the slowest setting.
TIP: Lint has a tendency to build up in the bobbin case especially with cotton threads. A tiny
amount of lint can cause a huge headache! Check the bobbin each time you change it to keep it clean.
All this information is available in the Tin Lizzie Manual or in their videos listed on their website.

As I said, I love my machine. It runs smoothly and quietly, and I still say...It was the best bang for my buck...which we all look for these days.

Last edited by quilterella; 05-29-2012 at 12:18 AM.
quilterella is offline  
Old 05-29-2012, 04:39 AM
  #6  
Power Poster
 
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
Default

I have the Viking version also and love it. Not fussy at all about thread, no tension issues. Not so thrilled about the frame, though. Too stiff to do really small detailed stuff, like micro stippling.
PaperPrincess is offline  
Old 05-29-2012, 04:56 AM
  #7  
Super Member
 
quilter1's Avatar
 
Join Date: Apr 2009
Location: Ayr, Ontario
Posts: 1,059
Default

I have had mine for 3 years and have been very happy. Go for it, your quilting life will change forever!
quilter1 is offline  
Old 05-29-2012, 08:31 AM
  #8  
Member
Thread Starter
 
Join Date: Feb 2011
Location: Michigan
Posts: 73
Default

Thank you everyone for all your comments and hints. I'm going to "go for it" . I have butterflies, I'm so excited and nervous.
Quiltcamp is offline  
Old 05-29-2012, 03:20 PM
  #9  
Super Member
 
Gramie bj's Avatar
 
Join Date: Dec 2010
Location: Riverside Washington
Posts: 1,508
Default

Originally Posted by Quiltcamp View Post
I trust all my fellow quilters on this board and know you will help me out.
I feel like an expectant mother and need some help.
I have a chance to purchase a used Tin Lizzie 18LS. I really need some info on this machine.
Does anyone have any opinions? Is it a good machine. Any problems I need to know about
to help make my decision to take the plunge??? The owner stated no problems - she is the original
owner and has had it for 2 years.
I have one and love it! Like all new things it takes some time to get used to. Practice practice practice!!! It is only as hard to use as you make it. Check out the net for classes on how to long arm. If you already know how your 2 steps ahead of where I was when I got mine. They are a very well made machine, the company is great to work with. Ask the seller if you can come over and try it for a while, will she work with you on it? Having a live person to walk you through the first couple of practice sessions would be great. I did mine over the phone long distance! LOL it was crazy but the machine is so simple to use I was able to learn anyway. I had some problems with the machine to start with but they were operator errors LOL. Good luck! If you get it, I'm sure you will enjoy time spent with your Lizzie.
Gramie bj is offline  
Old 05-29-2012, 03:56 PM
  #10  
Super Member
 
Christine-'s Avatar
 
Join Date: Jan 2012
Location: USA
Posts: 1,603
Default

I'm in your situation, excited and nervous!! I have a Tin Lizzie 26LS sitting on my dining room table, waiting for the drywall to be finished in my quilting room before I can set it up. It looks like I'll be able to start setting it up THIS WEEKEND! Can't wait! I'm definitely going to be reading all the great posts from quilting board this weekend!
Christine- is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
qpg89
Main
44
07-20-2015 10:06 AM
butterflywing
Main
7
03-22-2009 05:43 AM
Sitkaquilter
Main
4
03-13-2009 08:31 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter