Using muslin
05-03-2013, 04:15 AM
#12
Super Member
Join Date: Nov 2010
Location: Southern New Jersey USA
Posts: 1,473
I've been using deli dry waxed paper you can get at sSam's club or BJs for a foundation. You can cut it to size either by hand or with a go or sizzix cutter and it tears off very easily. It's a lot cheaper than what is sold specifically for quilting. It does not put any residue on your fabric if you iron while still on the paper.
05-04-2013, 04:24 AM
#14
Super Member
Join Date: May 2012
Location: Tall Corn State
Posts: 1,231
Originally Posted by neenee586
It's not a silly question. When I start my blocks I use a glue stick to lightly glue down the main strip face up. After that the next strip is sewn on right sides together (RST) then flip and press. Repeat this process on both sides of first strip, using different width strips to add interest. For my foundation I use any cotton (perhaps something too thin to use in a quilt) fabric I have on hand sewing to the wrong side which is usually lighter, I don't care to mess with paper and like the heavier block. If you use the same solid color for main strip that gives a different look.
Here is a link to pix of string blocks, I hope I've helped a little. Good luck!
http://www.google.com/search?hl=en&g...BuPnyAGCvoG4DQ
Here is a link to pix of string blocks, I hope I've helped a little. Good luck!
http://www.google.com/search?hl=en&g...BuPnyAGCvoG4DQ
05-04-2013, 04:31 AM
#15
Member
Join Date: Feb 2012
Location: Smyrna, GA
Posts: 71
My Aunt gave me an antique quilt that was pieced on muslin and it didn't wear well. Bonnie Hunter recommends piecing on paper rather than muslin. She recommends using phone book pages or cheap sketch pads from the dollar store. I have been saving the light weight paper that companies use for packing materials. I iron it flat and cut it into squares. It's amazing how many squares you can get out of paper that would otherwise end up in the recycle bin.
05-04-2013, 04:53 AM
#16
Junior Member
Join Date: Mar 2013
Location: Kansas
Posts: 164
Originally Posted by Txsuthrn
I wanted to order tHe 10 in piecing squares Missouri quilt co has and has a tute on it also. The site says out of stock so I went to my local shop when I asked about them the lady said oh don't do that just cut musli draw lines that way u don't have to tear paper. Well I am a very inexperienced beginning quilter I just stood there and finally said ok. Now I know I'd need 10 in muslin squares but how far apart do I draw the Lines? They are slanted not straight.. Forgive my Silly question but it's the only way I know to find out and this group is so kind to beginners.
05-04-2013, 05:58 AM
#17
Super Member
Join Date: Sep 2011
Location: Carroll, Iowa
Posts: 3,380
As I had a bolt of muslin, I went that way. Yes it is a bit heavier than usual with 2 layers of fabric but as I'm making these as lap quilts for elderly folks, they will enjoy the extra warmth. I starched my muslin, then cut them out to size. I'm using up a bunch of my scraps this way too. Craftsy also had the basic same pattern but smaller plus yet another one which you start with a foundation but cut off the excess afterwards. This one makes a star in the center when you put the 4 pieces together. I've made one of each so far and am on 2 more but this time I'll just leave the foundation on both of them. This is a great way to use up your scraps as they seem to multiply during the night.
Suz in Iowa
Suz in Iowa
05-04-2013, 06:27 AM
#18
Super Member
Join Date: Feb 2012
Location: New Orleans, La
Posts: 1,768
Originally Posted by neenee586
It's not a silly question. When I start my blocks I use a glue stick to lightly glue down the main strip face up. After that the next strip is sewn on right sides together (RST) then flip and press. Repeat this process on both sides of first strip, using different width strips to add interest. For my foundation I use any cotton (perhaps something too thin to use in a quilt) fabric I have on hand sewing to the wrong side which is usually lighter, I don't care to mess with paper and like the heavier block. If you use the same solid color for main strip that gives a different look.
Here is a link to pix of string blocks, I hope I've helped a little. Good luck!
http://www.google.com/search?hl=en&g...BuPnyAGCvoG4DQ
Here is a link to pix of string blocks, I hope I've helped a little. Good luck!
http://www.google.com/search?hl=en&g...BuPnyAGCvoG4DQ
05-04-2013, 07:25 AM
#20
Super Member
Join Date: May 2009
Posts: 7,741
Originally Posted by neenee586
Here is a link to pix of string blocks, I hope I've helped a little. Good luck!
http://www.google.com/search?hl=en&g...BuPnyAGCvoG4DQ
Thread
Thread Starter
Forum
Replies
Last Post
