Using starch - cleaning the iron afterwards
10-18-2018, 01:01 AM
#12
Super Member
Thread Starter
Join Date: Mar 2011
Location: South Yorkshire UK
Posts: 1,145
Originally Posted by SuziSew
If I start getting build up I use one of the "magic erasers". Works great and doesn't mess up my iron. In a pinch I've also just used a regular towel, sprayed it with water and "iron" it until it's clean
10-18-2018, 01:02 AM
#13
Super Member
Thread Starter
Join Date: Mar 2011
Location: South Yorkshire UK
Posts: 1,145
Originally Posted by gingergrandma
I use the magic eraser too!
Several recommendations for these - I’ll have to see if I can get them here in the UK. If not, one of my US friends may get an unusual Christmas present request!
10-18-2018, 01:05 AM
#14
Super Member
Thread Starter
Join Date: Mar 2011
Location: South Yorkshire UK
Posts: 1,145
Originally Posted by Jingle
That is the main reason I don't use any kind of starch. I didn't know about stuff to add to the starch. In the 1950's my Mom sprinkled clothes to be ironed with just water. I don't recall her using starch.
10-18-2018, 01:07 AM
#15
Super Member
Thread Starter
Join Date: Mar 2011
Location: South Yorkshire UK
Posts: 1,145
Originally Posted by pocoellie
I just use plain old water to clean the sole plate. Here's how I was taught how to starch: when your iron gets all gunky, it's because when you’re ironing,and the fabric hasn't had a chance to absorb the starch, what you're doing is, instead of ironing the fabric, you are ironing the starch. I starch every piece of fabric I'm going to work with, at least 2 hours ahead of the time, throw it in a large ziplock bag, and let it sit, then I'll take it out, either line dry or throw in the dryer for a few minutes, then iron, have never had a problem with the iron getting all gunky then, I do spray mist with water since I don't use the steam on my iron.
10-18-2018, 02:40 AM
#17
Super Member
Join Date: Mar 2011
Location: Central NJ
Posts: 5,570
I had this issue just the last couple of days. I normally use Sta-Flo liquid starch in a 50/50 mix. I let the starch soak into the fabric for a few minutes and start ironing. Well, I ran out of Sta-Flo and my local grocery store only had 'Linit' brand. I think it has a lower scorch point than the Sta-Flo. So I ended up having gunk all over my iron. Of course, could not find the Iron Off cleaner so had to purchase a different brand of that yesterday. Not quite as good as Iron Off but it did work.
You squeeze the goo on a piece of terrycloth, rub your hot iron on it and the gunk comes off. Clean iron once again. Yippee! BTW, I also purchased more Sta-Flo. Will put the other jug aside and only use if I have another starch emergency, lol.
You squeeze the goo on a piece of terrycloth, rub your hot iron on it and the gunk comes off. Clean iron once again. Yippee! BTW, I also purchased more Sta-Flo. Will put the other jug aside and only use if I have another starch emergency, lol.
10-18-2018, 06:24 AM
#18
Super Member
Join Date: Sep 2011
Location: Carroll, Iowa
Posts: 3,380
I found if you starch from the bottom side and press on the top side, it keeps the starch from collecting on your iron. I normally starch my fabrics using the dunk, squeeze thru a wringer and hang method. So the starch is on both sides but I have never had an issue with starch getting on my iron. If I have to spray more starch on the block I starch from the back side and then press. If you let the starch soak in before you press, that also will help with the buildup.
As to cleaning your iron of the buildup, I use Dritz's "Iron Off" in a tube found in the sewing dept of Walmart. I put some on an old rag and run my iron over the stuff. It may take a couple times depending on how much buildup you have but it works great for me. I haven't had to use it in some time now.
[
As to cleaning your iron of the buildup, I use Dritz's "Iron Off" in a tube found in the sewing dept of Walmart. I put some on an old rag and run my iron over the stuff. It may take a couple times depending on how much buildup you have but it works great for me. I haven't had to use it in some time now.
[
Thread
Thread Starter
Forum
Replies
Last Post
woohoowendy
Main
12
04-02-2011 02:02 AM
