Go Back  Quiltingboard Forums > Main
Virtual Quilt Retreat - March Edition 3-22-13 >

Virtual Quilt Retreat - March Edition 3-22-13

Virtual Quilt Retreat - March Edition 3-22-13

Old 03-22-2013, 12:38 AM
  #51  
Super Member
 
mom-6's Avatar
 
Join Date: Feb 2010
Location: Texas
Posts: 6,395
Default

EmmaS - I've done a braid runner with more widely different fabrics than you are considering and it turned out pretty, just did not do the tonal progression like the examples here show. I like what you have pictured.
mom-6 is offline  
Old 03-22-2013, 05:19 AM
  #52  
Senior Member
Thread Starter
 
Join Date: Dec 2012
Location: Haverhill, MA
Posts: 498
Default

Ok, Sorry for the delay. Here are the instructions. Once my email is done acting up I will be shipping out the *.pdf versions to everyone.

FrenchBraid Table Runner


FabricRequirements:
Braids:Each fabric for the braids will require approximately:

4= 2 inch by 8.5 inch strips (for one run) OR
8 = 2 inch by 8.5inch strips

Accent:You will need 24 = 2 inch by 2 inch squares
CenterBlock: Center square needs to be 8.5 inches by 8.5 inches.
Backing:the backing will require a piece that is at least 12.5 inches wide byabout 48 inches long.
*youcan always piece this*
Binding:you will need a strip of binding (either 2.25 or 2.5 in widedepending on your desire) by 100 inches.



Cutting:
Braid Fabrics: 8.5 inches x 2 inches (4 of each braid)
Accent Squares: 2 inches x 2 inches ( 2 for each braid)


Center Square: 8.5 inches x 8.5 inches


CenterSquare:
The center square should be finished at 8.5 inches by 8.5 inches. Youmay do the center in different ways. You can embroider one, fussy cutone, or piece one.
In the end the center should measure 8.5 x 8.5 inches. Stretch yourboundaries do something different!


FabricSelection:
Thekey to a glowing braid is in the selection of fabrics used to createthe braid. You have 2 different types of fabrics, the braid fabricsand the accent fabric. I will start with the discussion on how toselect braid fabrics. These fabrics focus mainly on tone and value.You first need to decide what color you want the finished product tobe, such as blue/green/yellow/etc. You may also decide to go through2 or even 3 colors. I have done several of each, so I will stronglysuggest for your first, settle on one color. It is infinitely easierto find one color than shifting through values of differentcolors.

Onceyou select the color family you want, then you need to find fabricsthat go through the different values of that color in a specifictone. It is important to note, your fabrics for the braids need to beof the same tonal family but different values in that tone. Setthem up on a table you pass often, in the order you want to do them.Then leave them there for several days, look at the braids indifferent lights and times of day. Feel free to shift things aroundas you need to do. For my larger versions of the braids I generallyleave them out for a week or two before finalizing the color order.Take the time you need, trust me it will come out wonderful.


Instructions:
  1. Start by cutting and preparing the center square. Depending on what you want to do for the center square will determine the time/effort needed for preparing this square. I wont get into too much detail since it is a personal choice and everyone is different. I opted for a very complicated paper piecing center square. This is a great time to try those!
  2. Now the most helpful tip of the whole construction, when you finish cutting your braids, PLEASE take a few minutes to put them in the order you are going to sew them. Set up 4 different stacks, each stack is one side of one half of the braid. It really helps with the piecing if it is all in order to begin with.
  3. Take the center accent squares and sew them onto the short side of the braids. You will be sewing them onto 2 of the stacks from #2. Use a ¼ inch seam. PRESS THE SEAMS TOWARD THE LONG SIDE! This is very important later when braiding so that your seams nest properly. (These will now be called the accented strip, where the other 2 stacks are your unaccented strips)
  4. Start the braiding with the center square, place one unaccented strip along the edge of the center square. Stitch down with a ¼ inch seam.
  5. Finger press the seam toward the unaccented strip (away from center) in the corner you are using for the “point” of the braid.
  6. Lay the accented strip down along the center square and unaccented strip so that the seams “lock” where the accent block is and the finger pressed seam of #5. Stitch down with ¼ inch seam
  7. Press the braid away from the center. Be careful NOT to stretch the fabrics.
  8. Now lay an unaccented strip on the side where you laided the last one. I usually put unaccented strips on the left and accented on the right. Just works for me.
  9. Repeat steps 4 -7.
  10. Continue until you get to the end of that side (the one stack).
  11. Turn so that the other point of the center square is at the top and the braids are at the bottom.
  12. Repeat steps 4 –10
  13. Now your braid will have 'tail' like things along the side, that is ok, we will be trimming those off. They are NOT supposed to match up on that side. They do need to match up on the points of the accent squares.
  14. Now lay the runner down on your cutting board. Lay a ruler along the side. Line it up so that most of the shorter side of ALL the tails are lined up. Trim off the excess. See image, it will make more sense.
  15. Repeat on all 4 sides, keeping each side as straight as possible.
  16. Lay down some backing and batting. Lay the runner down on top of the batting/backing. You can now trim to either the same size or just an inch or so larger. Depends on what you decide to do for the quilting, more dense quilting will require more batting/backing.
  17. Quilt the sandwich as desired. I have usually just done a Stitch in the Ditch along the center square and then every 3[SUP]rd[/SUP] or 4[SUP]th[/SUP] strip on each side. You can use decorative stitches along all seams, you can do a nice meander FMQ. It is really up to you and what you like/feel comfortable with doing. I dont have pictures yet of this part since it is still hanging on my design wall.
  18. Bind as usual. I use the accent fabric for the binding, but I am very matchy-matchy type person. Go for gold! Do what ever makes you happy!
  19. And that is your table runner! Congrats! French braids are really very easy. The hardest part is getting the color selections and placements. So take your time there.


AdditionalNotes:
1. You can useinsul-brite as your batting and it will make the runner do dual dutyas a hot plate. Only thing you need to ensure is that you use 100%cotton on everything, including the stitching. Meaning you probablyshould not use an embroidered center.
2. This is a great place to use different decorative stitches on yourmachines. Pick one and just go for it!
CarolynMT is offline  
Old 03-22-2013, 05:19 AM
  #53  
Junior Member
 
Ashjoy's Avatar
 
Join Date: Aug 2010
Posts: 201
Default

Going to start now.
Thanks!
Ashjoy is offline  
Old 03-22-2013, 05:23 AM
  #54  
Senior Member
Thread Starter
 
Join Date: Dec 2012
Location: Haverhill, MA
Posts: 498
Default

Email has gone out, assuming everything went well you all should have it in your regular email box now
CarolynMT is offline  
Old 03-22-2013, 05:38 AM
  #55  
Junior Member
 
Ashjoy's Avatar
 
Join Date: Aug 2010
Posts: 201
Default

Thanks!
I have a question. I don't have an embroidery machine, jut a quilters companion 4800, so no big embroidery for me. But I did get a dresden plate this week and was wondering what size to make a dresden for the center. I was thinking a 3 inch cut, but thought someone here might have a better idea.
Ashjoy is offline  
Old 03-22-2013, 05:41 AM
  #56  
Senior Member
Thread Starter
 
Join Date: Dec 2012
Location: Haverhill, MA
Posts: 498
Default

Originally Posted by Ashjoy View Post
Thanks!
I have a question. I don't have an embroidery machine, jut a quilters companion 4800, so no big embroidery for me. But I did get a dresden plate this week and was wondering what size to make a dresden for the center. I was thinking a 3 inch cut, but thought someone here might have a better idea.
The finished square needs to be 8.5in x 8.5in. I would not do embroidery bigger than 6.5 x 6.5 range. So I would say keep the dresden plate under 6.5 inches in diameter.
CarolynMT is offline  
Old 03-22-2013, 05:42 AM
  #57  
Junior Member
 
Ashjoy's Avatar
 
Join Date: Aug 2010
Posts: 201
Default

Now that I reading the email, I'm feeling slightly panicked!
Ashjoy is offline  
Old 03-22-2013, 06:23 AM
  #58  
Super Member
 
Join Date: Mar 2007
Location: Lansing, MI
Posts: 1,038
Default

I read through the instructions and have a question -- step 14 - trim excess from all 4 sides? Wouldn't we be only trimming the 2 sides of the straggly fabric? Or, maybe I'm getting ahead of myself.

I cut my pink ombre out last night and was EXTREMELY excited about how it turned out. The gals at our sit & sew came over and loved it too. I got 10 runs so will only be doing the one color for now. Think 20 runs (using the teal and pink fabric) would make it too long.

Will start on this after breakfast.....
vickig626 is offline  
Old 03-22-2013, 06:31 AM
  #59  
Senior Member
Thread Starter
 
Join Date: Dec 2012
Location: Haverhill, MA
Posts: 498
Default

Originally Posted by vickig626 View Post
I read through the instructions and have a question -- step 14 - trim excess from all 4 sides? Wouldn't we be only trimming the 2 sides of the straggly fabric? Or, maybe I'm getting ahead of myself.
..
Yes, but since my ruler is shorter than the length of the runner, I have to make 4 cuts. I am sorry, I wasnt very clear. You are trimming 2 sides of the runner, but with 4 cuts
CarolynMT is offline  
Old 03-22-2013, 06:33 AM
  #60  
Senior Member
Thread Starter
 
Join Date: Dec 2012
Location: Haverhill, MA
Posts: 498
Default

Originally Posted by Ashjoy View Post
Now that I reading the email, I'm feeling slightly panicked!

Now now, dont get panicked, it really is easy peasy when you put it together. Just go slow. Sew on the small accents, sort your stacks, and just do one braid at a time. Iron, then the next braid. Once you get past that first one, the rest of it is just repetition. I call this my ADHD pattern, sew for 2 seconds, get up and iron, sew for 2 seconds, up and iron......consider it exercise
CarolynMT is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Raggiemom
Main
102
03-08-2016 05:46 PM
kaelynangelfoot
Main
52
12-06-2013 04:48 AM
kaelynangelfoot
Main
112
05-28-2013 12:07 PM
CarolynMT
Main
146
05-03-2013 08:38 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter