Wash or Not Wash
#1
Member
Thread Starter
Join Date: Sep 2013
Location: Mansfield, Texas
Posts: 6
Wash or Not Wash
I do a block of the month quilt and was wondering if it is better to wash all the small little fabric pieces before putting the block together. Some people say they wash theirs and others don't. An owner of a quilt shop told me fabrics nowdays do not bleed like they use to. So experienced quilters, I would love your opinion. Also, what about the rest of the fabric used in the quilt like the big pieces for the borders.
#2
Super Member
Join Date: Oct 2010
Location: Nebraska
Posts: 3,255
All I can tell you is what I do, and I do not was the fabrics I get for my block of the month. This is a popular topic here and each person has their own way. I don't routinely prewash any quilting fabric and haven't had any problems yet. Having said that, I recently needed to use a dark red for trim on an otherwise lighter colored runner and I did rinse it in warm water to check for running. It was fine, no running. I do wash finished quilts with a color catcher when completed. Also checking to make sure no seams are coming apart. To answer your last question, no I will not prewash the yardage for my BOM, either.
Last edited by suern3; 03-16-2017 at 03:16 PM.
#5
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
Although I do at times prewash yardage I never prewash cut pieces. They might fray or shrink enough to cause your blocks to not go together. I've done many BOMs over the years and never had an issue due to not prewashing the block fabrics.
#7
Super Member
Join Date: Aug 2011
Location: kansas
Posts: 6,407
two quilt shop owners have told me the same thing--that most fabric doesn't bleed and to do a "test" first--I rub (very hard) white paper on the fabric and if NO color on the paper, then it's good--if a color (even a hint) I wash. I end up seldom needing to wash. I don't have issues with the sizing in the fabric so not allergy sensitive, although know quilters that must wash for that reason. I do wash my quilts in cold water (wash everything in cold) and use color catchers and rarely any color on them. I steam (heavy) my yardage before cutting so shrink it then.
#8
Super Member
Join Date: May 2012
Location: Florida
Posts: 1,585
Wash or Not Wash
I don't do (or haven't done) BOM blocks and I don't buy pre-cut kits. That being said, I do pre-wash everything else. I've bought good quality cottons, and I can't vouch for what the quilt shop owners say -- all I can tell you, is that I've had a LOT of fabric bleed, especially reds. I test the fabrics for bleeding by placing a narrow strip (6 inches long) into the hottest tap water available and leaving it set for an hour or so. If the fabric bleeds, it will show up on an all-white paper towel dipped into the water in which the fabric strip was placed. The paper towel will show whether or not the fabric bleeds. I've also had some very deep blues bleed "like a stuck hog". If I have a fabric that bleeds, I treat it to "set" the dye. I use a product available online, and it is very effective. I recently completed a red and white log cabin quilt -- lots of reds and whites. I treated every piece of fabric in that quilt (120 X 135 inches), but I will still use color catchers when I wash the quilt. I just don't take risks -- I can't afford to. Also, another reason for washing -- I have asthma and it can be very bad, so I wash the fabric before I start working with it.
Last edited by Jeanette Frantz; 03-16-2017 at 07:40 PM. Reason: correction
#10
Super Member
Join Date: Mar 2011
Location: Central NJ
Posts: 5,572
Just going through a bit of this situation myself. Finishing up a UFO which is a 2013 BOM. None of the block fabrics are pre-washed as I don't pre-wash small pieces for fear they will fray too much and I'll not have enough. I normally pre-wash all of my yardage.
For this project, I've chosen not to pre-wash the yardage I just purchased for sashings; borders; etc. I ironed my yardage (with steam and starch) to eliminate the fold crease so I could re-fold more on-grain. I usually do not have an issue with this process and my pre-washed and ironed fabric behaves very nicely after folding/hanging to get in on-grain. This time, not so much. When cutting strips for the first set of sashing I had several strips that were bowed a bit. Not enough to be unusable but still 'off'.
My decision to not pre-wash the yardage was so that it would behave the same as the pre-cut pieces used in the blocks relative to shrinkage. Granted, that is mostly controlled by the batting used (in my case 100% cotton W&N) but still wanted all the fabrics to have the same shrinkage rate - or as close as possible given different manufacturers.
Bleeding was not my concern as I agree with most of the other posters that most fabrics do not bleed they way they used to ages ago. We'll see how my next set of sashing goes in terms of getting it on grain with this process.
For this project, I've chosen not to pre-wash the yardage I just purchased for sashings; borders; etc. I ironed my yardage (with steam and starch) to eliminate the fold crease so I could re-fold more on-grain. I usually do not have an issue with this process and my pre-washed and ironed fabric behaves very nicely after folding/hanging to get in on-grain. This time, not so much. When cutting strips for the first set of sashing I had several strips that were bowed a bit. Not enough to be unusable but still 'off'.
My decision to not pre-wash the yardage was so that it would behave the same as the pre-cut pieces used in the blocks relative to shrinkage. Granted, that is mostly controlled by the batting used (in my case 100% cotton W&N) but still wanted all the fabrics to have the same shrinkage rate - or as close as possible given different manufacturers.
Bleeding was not my concern as I agree with most of the other posters that most fabrics do not bleed they way they used to ages ago. We'll see how my next set of sashing goes in terms of getting it on grain with this process.
Thread
Thread Starter
Forum
Replies
Last Post