Help with FMQ on a 301A
#1
I just picked up my 301A from the Singer repair person. It just needed a good cleaning and the bobbin winder wheel replaced. (I have had it for a while but just never got it to the dr. for a check-up.) It sews like a dream, the straightest stitch I have ever seen.
Now if I can just figure out how to FMQ, I will be one very happy quilter. I know how to lower the feed dogs, but I can't get it to make a stitch. The needle moves great, but the top and bottom threads don't form stitches. I have a fmq foot that fits slant shank machines, but it just doesn't work right. It is all plastic.
Any help will be greatly appreciated!!!
I will be taking my Rocketeer in next for a good oiling and check-up.
Now if I can just figure out how to FMQ, I will be one very happy quilter. I know how to lower the feed dogs, but I can't get it to make a stitch. The needle moves great, but the top and bottom threads don't form stitches. I have a fmq foot that fits slant shank machines, but it just doesn't work right. It is all plastic.
Any help will be greatly appreciated!!!
I will be taking my Rocketeer in next for a good oiling and check-up.
#2
Super Member
Join Date: Sep 2010
Location: Corpus Christi, Texas (that's me!)
Posts: 3,771
I have a 301A and I use it for FMQ a lot!
Okay I read that you know how to lower your feed dogs and that's located under your long bed towards the outside corner not facing you. There's a metal part that screws ( that protrudes in that area) that screw is for lowering your feed dogs. Turn that screw all the way to the opposite direction until it will not give. With that action your feed dogs are now lowered. And use a Singer needle only, not a Schmetz because these little machines WaNt their particular needles. Use a good thread, I've been using the Connecting Threads and my machine loves it.
When you get ready to piece your blocks, do not forget to screw that piece back to it's original because then you will not be able to move a stitch.
I got my FMQ foot from SewClassics, the less cost efficient one is going to challenge you and give you headaches.
I hope this helps!
Okay I read that you know how to lower your feed dogs and that's located under your long bed towards the outside corner not facing you. There's a metal part that screws ( that protrudes in that area) that screw is for lowering your feed dogs. Turn that screw all the way to the opposite direction until it will not give. With that action your feed dogs are now lowered. And use a Singer needle only, not a Schmetz because these little machines WaNt their particular needles. Use a good thread, I've been using the Connecting Threads and my machine loves it.
When you get ready to piece your blocks, do not forget to screw that piece back to it's original because then you will not be able to move a stitch.
I got my FMQ foot from SewClassics, the less cost efficient one is going to challenge you and give you headaches.
I hope this helps!
#3
Super Member
Join Date: Sep 2009
Location: Massachusetts, USA
Posts: 1,775
Originally Posted by SherriB
I know how to lower the feed dogs, but I can't get it to make a stitch. The needle moves great, but the top and bottom threads don't form stitches.
#4
Junior Member
Join Date: Mar 2011
Location: Western NY
Posts: 152
Make sure you are threading the needle from right to left (ask me how I know that one) and make sure the presser foot is down- easy to forget that one too. Drop the feed dogs, put the stitch length lever on the middle line and then try. If that does not work, take the darning foot off, raise the feed dogs and put on a regular foot and try to sew a regular seam- maybe the bobbin is backwards (gee, I sure made a lot of mistakes when I set up my 301 to FMQ!)
Good luck- I love FMQ on my 301. I have that plastic darning foot and it works fine on mine. Just thought of one more thing... when I put that foot on my machine, I thought it didn't line up right- it actually -did- once I had put the presser foot down.
Good luck- I love FMQ on my 301. I have that plastic darning foot and it works fine on mine. Just thought of one more thing... when I put that foot on my machine, I thought it didn't line up right- it actually -did- once I had put the presser foot down.
#6
Some questions to try to narrow it down:
Did you use basting spray? Are you practicing on a "sandwich" of quilting cottons over cotton batting? Does the batting contain polyester?
Are you using a universal or ball point needle? Is the flat side of the needle on the left and is it threaded from right to left?
What size thread are you using in the needle and what size needle are you using?
You'll probably love FMQ with this little machine once you figure out her eccentricities. :)
Did you use basting spray? Are you practicing on a "sandwich" of quilting cottons over cotton batting? Does the batting contain polyester?
Are you using a universal or ball point needle? Is the flat side of the needle on the left and is it threaded from right to left?
What size thread are you using in the needle and what size needle are you using?
You'll probably love FMQ with this little machine once you figure out her eccentricities. :)
#7
I am using the thread and needle that the sewing repair man put in. I tried a sandwich of solid color cotton and warm and natural. I tried the plastic darning foot and it just wouldn't work.
I know I will love this machine for straight stitching. I ordered a 1/4 inch foot from April's 1930 store and can't wait to get it.
thepolyparrot, is that a Rocketeer in your avatar? I have one and it will be going in for a check up soon. The thread keeps breaking after a few stitches.
I know I will love this machine for straight stitching. I ordered a 1/4 inch foot from April's 1930 store and can't wait to get it.
thepolyparrot, is that a Rocketeer in your avatar? I have one and it will be going in for a check up soon. The thread keeps breaking after a few stitches.
#9
When I have the plastic foot on, I can move the fabric but the top thread and bobbin thread will only form a stitch every so often. I have long pieces of thread between stitches. When I have a regular presser foot on, I can't move the fabric without tugging very hard, and this is with the feed dogs down. With the feed dogs up, it sews the prettiest straight stitch.
#10
Senior Member
Join Date: Aug 2010
Location: Massachusetts
Posts: 500
When you start to FMQ, both threads need to be on top of the fabric! Re-thread the top thread and check the bobbin thread is in the slot of the bobbin case. This is just to make sure something was not missed. Keep us up to date on what is happening!
Nancy
Nancy
Thread
Thread Starter
Forum
Replies
Last Post
Stitch124
For Vintage & Antique Machine Enthusiasts
14
05-02-2013 11:45 AM
Stitch124
For Vintage & Antique Machine Enthusiasts
14
04-27-2013 10:05 AM