Go Back  Quiltingboard Forums > Main
Will this work? (strange new-to-me idea) >

Will this work? (strange new-to-me idea)

Will this work? (strange new-to-me idea)

Old 10-06-2012, 05:13 AM
  #1  
Senior Member
Thread Starter
 
JenelTX's Avatar
 
Join Date: Jan 2011
Location: Central Texas
Posts: 809
Default Will this work? (strange new-to-me idea)

I want to create two side-by-side applique'd wall hangings of an underwater scene. I've never done applique before, so it will be a fun challenge. For the underwater background, I found a great fat quarter bundle of Caribbean blue batiks, going from dark to light. What I'd like to do is cut the fat quarters into different width strips, put right sides together, sew together in a wavy line, and then cut away the additional fabric beyond the 1/4-inch seam allowance. Is there any reason this will not work? Are there any special tricks for pressing a curved seam?
JenelTX is offline  
Old 10-06-2012, 05:25 AM
  #2  
Super Member
 
Join Date: Jan 2010
Location: West Coast
Posts: 9,267
Default

why not try a small sample with scraps to see if you get the result you are looking for?
DebraK is offline  
Old 10-06-2012, 05:27 AM
  #3  
MTS
Banned
 
Join Date: Nov 2010
Posts: 4,134
Default

It won't open to lie flat as you'd have a concave sewn to a concave curve, and a convex to a convex.

Ask me how I know this.
And after I did it I just sat there and laughed at myself.
It was one of those "moments."

You need to cut them with wide seam allowances overlapping, RIGHT sides up on both pieces (I know they're batiks but it has to be the final UP side).

Then you can put RIGHT sides together and sew them after you've cut the curves.

As long as it's a nice gentle curve, you won't need a template.
Just work slowly as sew the strips together, don't get ahead of yourself, keep making sure the convex and concave are mostly lining up, and you should be able to press the strip set flat.

Also, cut the strips wide enough so you have room for the curves on both sides.
I work in pairs, then sew the pairs together, then quads together, etc.

You won't need pins or a special foot.

You can square the whole thing up when you're done.

Last edited by MTS; 10-06-2012 at 05:34 AM.
MTS is offline  
Old 10-06-2012, 05:28 AM
  #4  
Senior Member
Thread Starter
 
JenelTX's Avatar
 
Join Date: Jan 2011
Location: Central Texas
Posts: 809
Default

Thanks. Yes, I've been thinking the same thing, that I need to play with scraps. I just thought I'd also tap into the expertise here on the board.

Love your avatar, Debra! Really interesting shapes and colors.
JenelTX is offline  
Old 10-06-2012, 05:46 AM
  #5  
Senior Member
 
Tashana's Avatar
 
Join Date: Jul 2012
Location: Long Island
Posts: 798
Default

Here is a technique I learned but did not practice.
Lay two pieces of fabric that you want to have a curved seam face up and overlap them by about an inch or so. Using your rotary cutter free hand cut the curve in the overlapped fabric. Flip the fabric so the right sides are facing each other. You will have a very mismatched curves. Start stitching them together by lining the edged of the mismatched curves. You may need to work slowly in the beginning. Press well. This technique was explained in one of Rayna Gilman's books. That woman is a genius.
Tashana is offline  
Old 10-06-2012, 06:09 AM
  #6  
Power Poster
 
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,680
Default

When you do the overlap if you have excess on both pieces ... you can match the two pairs and save on the off cuts and waste.

For me I'd start with the FQs as is and lay on top of each other. both facing up. Then take the top left and bottom right as a pair to sew ... and the top right and bottom left as another pair. Then move onwards to another FQ set. And then eventually match up sets that are sewn already for a second wave and a new set of colours mixed/

Tedious ... but it can be very effective!
QuiltE is offline  
Old 10-06-2012, 06:18 AM
  #7  
MTS
Banned
 
Join Date: Nov 2010
Posts: 4,134
Default

Here's a Round Robin I participated in back in 2003(?).

I did the outer ombre wavy border.

I made strata of over 20+ fabrics; my strips were thin because of the effect I wanted and the length of the space I had to do it.
I cross cut the strata into the widths I need for the border, and then attached those to the navy using the method I mentioned upthread.

I do remember it was a &#*@! to match up those miter corners.

But since you're going straight across, it will be a much cleaner process.


Not one pin was used during the whole process. ;-)

[ATTACH=CONFIG]367863[/ATTACH]
Attached Thumbnails rrfl-e.jpg  
MTS is offline  
Old 10-06-2012, 06:24 AM
  #8  
Power Poster
 
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,680
Default

Beautiful and oh so effective, MTS!
QuiltE is offline  
Old 10-06-2012, 06:35 AM
  #9  
MTS
Banned
 
Join Date: Nov 2010
Posts: 4,134
Default

Originally Posted by QuiltE View Post
Beautiful and oh so effective, MTS!
Thanks. In hindsight I probably should have curved the inner side as well but I was petrified of ruining the piece.
Doesn't matter anyway because the person who came after me screwed the whole aesthetic up - just slapped on a horrible border.
Yeah, I know, kumbaya and all that.
Too bad.

But you can see how a straight piano keys border, while still (would that be whilst?) having the ombre effect, would have been kinda boring.

It was incredibly easy to do once I got going.

@Jenel -
I think it's has a great idea of curving your underwater backgrounds.

Here's a quick tutorial - there are plenty more. Using "free form" gets you more than "freestyle" in your Google search.
http://www.sewn.net.au/TipsTools/Tut...edPiecing.aspx

Last edited by MTS; 10-06-2012 at 06:43 AM.
MTS is offline  
Old 10-06-2012, 06:36 AM
  #10  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,444
Default

I think I would go with applique. Since they are batiks and they fray very little, I would draw a curvy line on a narrow stip of wonder under. I would iron it to the back of one section and then cut the wavy line. I would peel off the paper and lay it over the next colour and fuse it in place. I would either do a straight stitch about 1/8 of an inch inside the wave to secure it or a fancy stitch if it wouldn't interfer with what I wanted to put over top it. Are you other shapes going to be fused applique or needle turn? The line of fusible would not be any bulkier than two 1/4 inch seam line to me but if you were worried you could use mistyfuse for a softer feel.
You could just stitch down the background strip without fusible. If I did it that way, I would stitch down the line I wanted and then carefully trim close to the stitching line with my duck billed applique scissors. I look forward to seeing what your underwater scenes look like.
Tartan is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
raptureready
General Chit-Chat (non-quilting talk)
15
05-15-2012 10:57 AM
Arizona Sunrises
Pictures
189
01-31-2012 11:18 AM
Deborah12687
Main
2
08-31-2010 03:46 PM
tkhooper
Main
14
04-24-2010 10:00 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter