|
Great idea! Thanks for sharing!
|
2 Attachment(s)
Thank you all for your comments. Just a few years ago I could barely drive a nail with a hammer. I bought my house in 2004 knowing that it needed LOTS of work, but I got more house for my money that way. I'm still an amature, but have learned a lot over the last six years. This was one of my easier projects.
The quilt in the picture is a top I bought from Aunt Bea's on ebay to use as practice on my FMQ. I am still working on the binding, but pictures are attached. It is made up of grandmother's fan and log cabin blocks, so I usually either call it my Grandmother's Cabin quilt or just my ebay quilt. The top was machine pieced and the workmanship and fabric were excellent. The top laid perfectly flat and was very easy to pin baste and quilt. Whole Quilt [ATTACH=CONFIG]83264[/ATTACH] Close up of quilting [ATTACH=CONFIG]83265[/ATTACH] |
Originally Posted by Lori L
I am bookmarking this post and have already decided what my DH's next project is going to be. Heaven help him when he says next "I need something to do." LOL
|
Great job! I also have that same Kenmore :)
|
You are a clever and talented lady!!Great job!! :thumbup:
|
3 Attachment(s)
Originally Posted by dsb38327
I can do that!!!!!!!!!!!!!! Oh my goodness! I NEED one of those. You described it so well that I could relate to what you were doing (would love if you had step by step pictures and posted them) and the way you photographed the final table shows me precisely what you meant. (I am friends with the tools and toys in the garage.!) It is now on my list.
|
Originally Posted by sewnsewer2
Great job! I also have that same Kenmore :)
|
Wow, that is a cool table!! I have a new Janome 6600 that I use now, but this just gave me an idea. I have an old Kenmore sitting in a closet that still works fine and I could do this with the Kenmore. Thanks so much for sharing. I just love all the wonderful ideas all of you have. Sarah
Originally Posted by laurlync
After reading posts on here about turning your sewing machine sideways to quilt, I decided to build my own quilting table from wood and fabric scraps I had around the house. I used a piece of 1/2 inch plywood which I cut 16 inches by 32 inches so it would fit on top of my sewing cabinet. I then cut a slot out for my machine to fit in. I measured how high I needed it to be to give me a flat quilting surface and ripped four 14 inch long 1 x 4's on my table saw to attach as skid-type legs and attached them to the plywood leaving room on the ends to attach the batting, fabric and clear vinyl. I attached the legs with several nails then used my palm sander to round off all the edges. I covered the top with 1 layer of 80/20 batting and a piece of fabric which I attached with a staple gun and added a piece of clear vinyl on top of that.
It works great and is light enough to move when using my machine for piecing. I can also take it with me when I travel and set it up on a table. My mother has the same machine I do, so I made one for her as well. It only took a couple hours to build each one. I thought about putting something on the front to give it a more finished look, but decided I like having it open to put my extra bobbins, clippers and other items out of the way but within easy reach. |
I'm bookmarking also. I hope to have mine made by next weekend! Thanks for sharing your ideas.
|
That is great and the best part is you did it yourself :thumbup: Your quilting is amazing :mrgreen:
|
| All times are GMT -8. The time now is 07:19 AM. |