Tuffet/hassock
09-10-2016, 05:37 PM
#1
Super Member
Thread Starter
Join Date: Jun 2010
Location: Longwood, Florida
Posts: 2,910
Tuffet/hassock
I have been seeing these cute awesome tuffets all over the web and I like them. I have this brand new Hassock (they don't sell these anymore), that a friend gave me, it had been tucked away for years. It's all leather and has a quilted star on top. Well I decided to work the pattern out. It's not hard and I will do a tut as I go along, so you can try it. I know there is a pattern for sale but really, it's not hard.
You can actually make a tuffet if you don't have a hassock or an old foot stool, it's no beg deal, just labor intensive. You just measure the circumference of the hassock, the radius, (which is half the diameter of the top) and make your pattern.
Here is one panel or wedge that I just made to test it. I think I got it. I will post more later.
I just counted my strips and I counted 9, oh well, 9 is good. I think you can make the strips any size you want for different effects.
You can actually make a tuffet if you don't have a hassock or an old foot stool, it's no beg deal, just labor intensive. You just measure the circumference of the hassock, the radius, (which is half the diameter of the top) and make your pattern.
Here is one panel or wedge that I just made to test it. I think I got it. I will post more later.
I just counted my strips and I counted 9, oh well, 9 is good. I think you can make the strips any size you want for different effects.
Last edited by Rosyhf; 09-10-2016 at 05:41 PM.
09-10-2016, 05:59 PM
#3
Super Member
Join Date: Nov 2010
Location: SoCal
Posts: 1,813
I am not making one so I am not the expert, but, my friend is making one by herself, via videos online. She then went to a quilt store that had classes and sold kits as she was looking buttons. She found out that she should have used muslin to stabilize the strips, using the muslin as a foundation. I think it is so that when you stretch the fabric over the cushion and sew/pull on the buttons, the stitches will not pop in the seam areas?
09-11-2016, 02:59 AM
#5
Super Member
Join Date: Oct 2011
Location: SE TN
Posts: 1,061
I made a tuffet. Yes there is a backing that I had to sew the strips onto. I think I had 8 strips per section.
Backing: The backing that I sewed onto had the stitch lines on it. So, it was like paper piecing.
Backing: The backing that I sewed onto had the stitch lines on it. So, it was like paper piecing.
09-11-2016, 06:49 PM
#10
Super Member
Thread Starter
Join Date: Jun 2010
Location: Longwood, Florida
Posts: 2,910
Tut
1..Measure across the top of hassock or tuffet or whatever. divided that measurement in half and that is your radius.
2..measure from the edge of the hassock to the bottom and add about 4 ins. for turning under.
3..measure around the hassock for the for the circumference, and divide that measurement by 8, This will be the measurement of your wedge. .add 3/4 ins on each side for the seams.
Add your radius #1 plus #2 and cut a piece of square paper that measurement plus a little over for safety.
The width of the paper will be the measurement you got from the wedge plus the 1 and 1/2 ins for the seams. ..so if your wedge is 10 ins, you will add 1 and 1/2 for a total of 11 1/2 ins for your wedge.
Fold the paper in half to get the center line. Put a dot at the beginning of that line at the top. Now measure from the top of the paper to the radius number and place a mark. Draw a line across the paper square from edge to edge. Draw ¾ seam allowance along both edges of the paper square.
Divide the rest of your paper square into 8 strips, not including the seam allowances. The strips don’t have to be equal. Start at the center seam. On each side of the seam draw a half ins line, that will make that strip 1 ins. Then draw lines on each side of this center strip. Only draw the lines up to the radius line.
After all these line are drawn, the proceed to line up those bottom line with the rest of the pattern. For instance..place ruler at the line and angle your ruler to the dot at the top of the paper square and continue with each line this way. Then cut the excess paper and you have your wedge. Lay this on your item to check it out and make adjustments to whatever you want. When you are happy with it, make a freezer paper pattern from you original paper pattern but this time draw the lines with a sharpie pen.
You will iron that freezer pattern to your muslin and cut it out, draw the lines on the muslin, just like your paper. You are now ready to add your strips. When you start to sew the strips on and you come to the radius point, just try to sew it like a curve.
2..measure from the edge of the hassock to the bottom and add about 4 ins. for turning under.
3..measure around the hassock for the for the circumference, and divide that measurement by 8, This will be the measurement of your wedge. .add 3/4 ins on each side for the seams.
Add your radius #1 plus #2 and cut a piece of square paper that measurement plus a little over for safety.
The width of the paper will be the measurement you got from the wedge plus the 1 and 1/2 ins for the seams. ..so if your wedge is 10 ins, you will add 1 and 1/2 for a total of 11 1/2 ins for your wedge.
Fold the paper in half to get the center line. Put a dot at the beginning of that line at the top. Now measure from the top of the paper to the radius number and place a mark. Draw a line across the paper square from edge to edge. Draw ¾ seam allowance along both edges of the paper square.
Divide the rest of your paper square into 8 strips, not including the seam allowances. The strips don’t have to be equal. Start at the center seam. On each side of the seam draw a half ins line, that will make that strip 1 ins. Then draw lines on each side of this center strip. Only draw the lines up to the radius line.
After all these line are drawn, the proceed to line up those bottom line with the rest of the pattern. For instance..place ruler at the line and angle your ruler to the dot at the top of the paper square and continue with each line this way. Then cut the excess paper and you have your wedge. Lay this on your item to check it out and make adjustments to whatever you want. When you are happy with it, make a freezer paper pattern from you original paper pattern but this time draw the lines with a sharpie pen.
You will iron that freezer pattern to your muslin and cut it out, draw the lines on the muslin, just like your paper. You are now ready to add your strips. When you start to sew the strips on and you come to the radius point, just try to sew it like a curve.
Thread
Thread Starter
Forum
Replies
Last Post
carolaug
Links and Resources
10
07-25-2014 05:17 PM
