Go Back  Quiltingboard Forums > Pictures
What am I doing wrong??? >

What am I doing wrong???

What am I doing wrong???

Old 03-14-2011, 07:37 AM
  #21  
Senior Member
 
Join Date: Jan 2011
Location: Dayton, OH
Posts: 661
Default

Originally Posted by featherweight
Originally Posted by PatriceJ
the dreaded extra stitch. i know it well. :lol:

the good news is that nobody will ever notice or worry about it but you.

the better news is that if it's only one stitch too many, and you notice it before you start stitching the next section of your line, it's fairly easy to fix.

slow down as you approach the pivot point. if necessary, do one stitch at a time for the last quarter inch or so. if your machine doesn't have a reliable needle up/down button, do it manually by turning the wheel in the proper direction.

make sure to stop stitching with the needle down.

life the presser foot, pivot the fabric, put the foot back down.

if you realize you are one stitch too far, manually back the needle up out of the sandwich to undo the extra stitch. carefully reposition the quilt. manually lower the needle so that it goes down in the correct spot. manually turn the wheel to bring the needle all the way down and then back up to complete that stitch.

proceed.
Excellent explanation :thumbup: :thumbup: I know what I want to say but takes me forever to put it in words...

Everything has been explained so well, but these two steps are quite important to follow all the time:

Make sure to stop stitching with the needle DOWN, then

Lift the presser foot, pivot the fabric, put the foot back down.

Personally I also like to move the machine wheel by hand when approaching the corner and the pivot point, and then when proceeding to sew. I like to know where each stitch is going until I get past the critical corner area.

Pam M
milp04 is offline  
Old 03-14-2011, 07:40 AM
  #22  
Super Member
 
OKLAHOMA PEACH's Avatar
 
Join Date: Mar 2010
Location: BLANCHARD, OK
Posts: 2,502
Default

Great colors, great work, don't worry be happy!!
OKLAHOMA PEACH is offline  
Old 03-14-2011, 08:37 AM
  #23  
Senior Member
 
grugirl's Avatar
 
Join Date: Jan 2011
Location: Graham, WA
Posts: 368
Default

Originally Posted by nativetexan
are you using your foot to measure where your seam was? I do. when i pivot, i put the pressure foot back down and see if my foot i'm using is in the right place or not. if not, i raise it again and take one more stitch if necessary.
also when pivoting, make sure you line up your block straight again. that seems to be your problem in your photo. just not lined up right when you begin stitching.
good luck.
Yes, exactly. I think so too.
grugirl is offline  
Old 03-14-2011, 09:50 AM
  #24  
Super Member
 
BizzieLizzie's Avatar
 
Join Date: Oct 2010
Location: England
Posts: 5,048
Default

I know with my machine that I can press a button to have the needle to stop with the needle in the fabric or out of the fabric. If I choose for it to finish in the fabric, then it will make that last stich to stay within the fabric...does this makes sense? Is this the reason for that extra little stich I think I see in your picture? If it is then perhaps you need to play around and alter your stich length to keep it to the finish you want? Not sure but that is what I sometimes need to do with my machine. It is not that noticeable but I understand that it is annoying sometimes especially when you pride yourself in doing things 'properly'. Best wishes.
BizzieLizzie is offline  
Old 03-14-2011, 09:56 AM
  #25  
Banned
 
Join Date: Dec 2010
Location: Corpus Christi, Tx
Posts: 847
Default

if you have a machine that has a needle button - my Esante es2 does - it goes one extra stich when you stop....so I have to make my self stop early

but to be honest, I didn't know what you were talking about until I saw the post on the extra step and then looked really really hard at the picture
pamkasperi is offline  
Old 03-14-2011, 10:00 AM
  #26  
Power Poster
 
RedGarnet222's Avatar
 
Join Date: Jan 2009
Location: Reno, Nv
Posts: 16,515
Default

Hi Michelle,
I have learned to count the stitches past the design. I know it takes my machine six stitches and then it is perfect to turn. I would make up a little test patch and count how many it takes your machine to get to the quarter inch mark. That way you are sure it is right and you won't get your bump.
RedGarnet222 is offline  
Old 03-14-2011, 10:06 AM
  #27  
Super Member
 
Quilter7x's Avatar
 
Join Date: Dec 2009
Location: north east
Posts: 8,394
Default

It also could be that after you've take that extra stitch, you're trying too hard to get back onto the 1/4" line that you're following immediately after taking the corner. Why not ease back into that 1/4" line rather than immediately going there. Does that make sense?
Quilter7x is offline  
Old 03-14-2011, 04:14 PM
  #28  
Super Member
Thread Starter
 
mmonohon's Avatar
 
Join Date: Oct 2010
Location: Washington State
Posts: 1,840
Default

Originally Posted by donnajean
Are you leaving the needle in the fabric when you lift the presser foot to pivit?
Yes.
mmonohon is offline  
Old 03-14-2011, 05:09 PM
  #29  
Power Poster
 
Jingle's Avatar
 
Join Date: Dec 2009
Location: Outside St. Louis
Posts: 38,181
Default

Another thing you could do is mark all your corners, before starting to sew, then follow those lines when you sew.

Very pretty table runner.
Jingle is offline  
Old 03-14-2011, 05:12 PM
  #30  
Super Member
 
luvTooQuilt's Avatar
 
Join Date: Jul 2010
Location: A Hop from Heaven, a Skip from Sanity and a Jump from the Good Life....
Posts: 6,665
Default

Originally Posted by PatriceJ
the dreaded extra stitch. i know it well. :lol:

the good news is that nobody will ever notice or worry about it but you.

the better news is that if it's only one stitch too many, and you notice it before you start stitching the next section of your line, it's fairly easy to fix.

slow down as you approach the pivot point. if necessary, do one stitch at a time for the last quarter inch or so. if your machine doesn't have a reliable needle up/down button, do it manually by turning the wheel in the proper direction.

make sure to stop stitching with the needle down.

life the presser foot, pivot the fabric, put the foot back down.

if you realize you are one stitch too far, manually back the needle up out of the sandwich to undo the extra stitch. carefully reposition the quilt. manually lower the needle so that it goes down in the correct spot. manually turn the wheel to bring the needle all the way down and then back up to complete that stitch.

proceed.
:thumbup: :thumbup: :thumbup: :thumbup:
luvTooQuilt is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dar627742
General Chit-Chat (non-quilting talk)
6
05-20-2010 02:40 AM
kkbrand
Main
16
03-28-2010 10:52 PM
ReRe
Main
4
02-28-2010 12:15 PM
fatnsassy
Main
16
11-26-2009 10:07 AM
Foggy
Main
6
09-22-2007 08:13 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter