Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Main (https://www.quiltingboard.com/main-f1/)
-   -   Extra large Quilt Clips (https://www.quiltingboard.com/main-f1/extra-large-quilt-clips-t318015.html)

lscho4jm 04-16-2022 05:48 PM

Extra large Quilt Clips
 
Does anyone have economical ideas for the large quilt clips? Would the clips that hold beach towels to chairs hold up?

PurplePansies 04-17-2022 01:42 AM

I’ve used jumbo size binder clips.

berrynice 04-17-2022 02:23 AM

I tried the beach towel clips but found them to be awkward and heavy.
This is what I turned to and I really like them. https://www.amazon.com/Coideal-Quilt...95&sr=8-5&th=1
They are the same as the smaller clips, but are about 2 1/4" and the grip on the fabric is stronger. I purchased the Clover brand (green) as I wanted to make sure they were good quality, though the linked ones above, may be the same quality.
Actually, it probably depends on how you want to apply the clips, as to what size you want to get. I also have used the 'bracelet' type, but once I used the jumbo wonder clips, I gave mine away.

lindaschipper 04-17-2022 03:51 AM

I also use the extra large binder clips. Any office supply store will carry them.


aashley333 04-17-2022 04:55 AM

The binder clips were hard on my hands. It took a lot of hand strength to open them wide enough to attach to quilting table. I use the large metal clips that are great for beach towels.https://www.amazon.com/dp/B07SDFF3NV...2s9dHJ1ZQ&th=1

Quiltwoman44 04-17-2022 05:28 AM

yes, binder clips rule in my sewing room!! and kitchen too!

lscho4jm 04-17-2022 07:44 AM

Thank you all. I’m going to try the binder clips.

cashs_mom 04-17-2022 12:11 PM

If you are wanting clamps to fasten your quilt to a table for sandwiching, I use these https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 The table I use has a beveled edge and the binder clips were hard to use. These work perfectly.

charlottequilts 04-17-2022 04:43 PM

If it's for clamping to a table, I use the blue Irwin clamps from Home Depot or Lowes. They release with a lever.

It probably depends on the thickness of your surface. On mine, the binder clips would destroy the fabric, they'd be so tight. Plus, they are really tough on the joints to take on and off.

hugs,
charlotte

mmunchkins 04-17-2022 04:55 PM


Originally Posted by charlottequilts (Post 8548074)
If it's for clamping to a table, I use the blue Irwin clamps from Home Depot or Lowes. They release with a lever.

It probably depends on the thickness of your surface. On mine, the binder clips would destroy the fabric, they'd be so tight. Plus, they are really tough on the joints to take on and off.

hugs,
charlotte

I also use these clamps.


All times are GMT -8. The time now is 10:28 PM.