2021 Fabric Moratorium
#216
Senior Member
Join Date: Apr 2019
Posts: 833
Send math help
For the back.
Quilt is 78 x 88. Need 4-6" of overage for the longarm. I have 5 yards and the RK Quilting Calculator says I need 5.25 of std 42". This should not be a problem. Throw in a stripe of something.... probably my 2 extra blocks and some strips of more scraps, a label and boom....but horizontal or vertical seams? So the extra strip gots the 78 direction or the 88?
Maybe I'm tired. Maybe I'm dumb. Maybe I just need a little hand holding.
Quilt is 78 x 88. Need 4-6" of overage for the longarm. I have 5 yards and the RK Quilting Calculator says I need 5.25 of std 42". This should not be a problem. Throw in a stripe of something.... probably my 2 extra blocks and some strips of more scraps, a label and boom....but horizontal or vertical seams? So the extra strip gots the 78 direction or the 88?
Maybe I'm tired. Maybe I'm dumb. Maybe I just need a little hand holding.
#217
Super Member
Join Date: Jan 2011
Location: Cottage Grove, MN
Posts: 2,807
Rff1010: Here’s my hand! 🤝 I’m not giving suggestions because my math has been off for a few weeks! Lol! I made more work for myself because I changed design plans several times and then got all mixed up. 🙂. You got this though!
#218
Rff1010, If the quilt is 78 x 88, for the longarm I would want the back to measure at least 86x96 (4" all around). 96" is 2 2/3 yards. Two lengths would be 5 1/3 yards, and wouldn't be wide enough for your 86" width. Check your quilting calculator again, because 5 1/4 yards would not be enough.
If you cut your 5 yards in half, you will have two 90" pieces. However you could cut it into two 86" lengths and have 8" left over for piecing. Assuming that you can get 40 usable inches in WOF after seam allowances, you would then need to make a stripe that finishes at 86" x 16" and insert it into the two 86" lengths you've cut from the 5 yards.
On the longarm it is best to have the backing seams running across the bars, rather than down. So if your quilt needs to be longarmed with the 88" of the top lying across the bars, you should consider a different piecing strategy for the backing.
I hope someone checks my math.
If you cut your 5 yards in half, you will have two 90" pieces. However you could cut it into two 86" lengths and have 8" left over for piecing. Assuming that you can get 40 usable inches in WOF after seam allowances, you would then need to make a stripe that finishes at 86" x 16" and insert it into the two 86" lengths you've cut from the 5 yards.
On the longarm it is best to have the backing seams running across the bars, rather than down. So if your quilt needs to be longarmed with the 88" of the top lying across the bars, you should consider a different piecing strategy for the backing.
I hope someone checks my math.
#219
Got back to my machine for a finish!
Trying to sneak this one in before today's postings are sent out.
Ta-Da! Finished!.... Well all except the label, but I don't know who is going to get it or if it will be a donation to Project Linus. All from my stash from top to backing and the batting in between! It feels so good to have a finish. This working thing is really cutting into my quilting time!
Ta-Da! Finished!.... Well all except the label, but I don't know who is going to get it or if it will be a donation to Project Linus. All from my stash from top to backing and the batting in between! It feels so good to have a finish. This working thing is really cutting into my quilting time!
#220
Super Member
Join Date: Jan 2011
Posts: 2,037
I finished 2 projects. 1 project was a small Christmas throw, I call call Snoopy meets the Grinch. (completely from stash). The other project (I call my “Chiefs,” quillow. This top was from stash and the backing was bought for the project. I’m going to make the latter into a quillow. Sorry no pics.