Originally Posted by
GrandmaSewNSew
Hi and thank you for this! I have EQ7 and can't find "easy draw". I did find the draw button and when I drew a line, I couldn't get it to stop drawing. Every time my curser went past the screen it made a new line. When I finally somehow got just one line I clicked the "color" tab at the bottom and then the colors appeared. When I selected one it colored the entire block as my line was gone. Don't know if I'm in the wrong mode but can't get this to work. Please help. Thank you.
You need to be sure you go to Worktable.
Click on Work on Block. This will put the Block tool in your top tool bar
Now you will see the picture below.
click on Block and then slide over and click on Easy Draw Block
When you get that done then click on the pencil that draws a straight line.
You only need to do the Easy Draw Block if you need a new block to work on. If you have a block you are using you don't need to go to this step.
The reason your line disappeared is because you have to make sure you start and stop on a dot. it has to be connected to one of the dots that are connected to an already existing line. To begin with this means the lines of the frame. After you connect a line to the frame then you can connect another line to the frame and the line you drew as long as that line connects to the frame.
If you don't connect it that line will disappear. Look at the second picture below and the last picture you can see the short lines didn't stay but the long ones connected to the sides did. As long as you connect to one of those solid lines not just the frame you should be okay.