The only problem I find with the table legs is rust and the D&D is broken on the right side. Part of the wood table that supports the left back of the machine is broken. I'm gluing it back and sanding the table before putting a coat polyurethane. I also plan on replacing all screws with flat head bolts as most of the holes are near stripped. As far as the paint goes I may just sand a little and wax for now. It all depends on how well the 31-15 sews now. I have the old style clutch and a 1/4 HP motor that came with the table and the machine turns freely. Before I do any thing but fix the table top and oil the machine well I'm going to do a little test sewing.