View Single Post
Old 02-26-2010, 09:44 AM
  #34  
gramquilter2
Super Member
 
gramquilter2's Avatar
 
Join Date: Jan 2010
Location: Somewhere North
Posts: 6,180
Default

Originally Posted by ckcowl
remember if your blocks are 1/8" off, in 8 blocks that equals 1" off...which can really make a difference, you would be better off after making all the blocks trimming them to the measurement of the smallest one and making them all equal...better yet...
find your 1/4"!!!
cut two 3" squares, sew them together along one side, and press seam allowance to one side, measure, it should measure 5 1/2" if not adjust and try again, once you find your 1/4" mark it on the sewing machine (some people use masking tape, there's lots of 'stuff' on the market)
once you are sewing a consistant 1/4" your blocks will fit together easier.
good luck.
the trimming them all to match works, but sometimes you loose points doing it that way it's better to work on being more consistant.
This is right on and when you take quilting classes they usually have you do the swatch to check that your seam allowance is correct.
gramquilter2 is offline