Go Back  Quiltingboard Forums >
  • Main
  • SCANT 1/4" SEAMS. >
  • SCANT 1/4" SEAMS.

  • SCANT 1/4" SEAMS.

    Old 01-19-2011, 07:32 PM
      #1  
    Member
    Thread Starter
     
    bucksie's Avatar
     
    Join Date: Jan 2011
    Location: Washington State
    Posts: 12
    Default

    I am new to this site because I needed to pass some questions by you seasoned quilters.....I have gained sooooo much precious knowledge from this message board, that for me as self-taught, has been nothing short of valuable! I began my first quilt long ago, but only got as far as blocks..However, when my first grandson was born last year, I vowed to make him (my little funny bunny) a quilt from gramma..well he's year old now and I just started sewing first block today (even though spent last 6 month's drawing blocks in EQ6).
    My rotary cutting went VERY well, and all pieces are cut perfect (so I think)..I took out my 1/4" foot with guide and snapped it on, and placed a long strip of foam insulation (I believe goes around a door? dunno, got it from husbands garage! - comes off easy, but sticks great, and stands about 1/4" high) and proceeded to practice practice practice a 1/4" seam..with in several attempts, I could measure down each seam, and it was EXACT 1/4" (whew!!! was sweating this one)..So i began piecing my first block..all went well with first couple pieces as they measured same 2.5"...when I went to add "to" the block (i am making square in square, or framed square), the pieces were EXACTLY 1/8" longer...NOW, I figured OK....If a scant means 1/16th of inch then this would mean that at least I am sewing precisely..being that the 2 seams would account for the 1/8" overage...But upon researching, I found that the scant applies more to quilters who press seams to one side....I don't, I press mine open...Not to mention, when i measured and cut, I went just a hair beyond the fat marker on my ruler...Now that I think about this, I shouldn't be off at all due to fabric intake..or should I?

    The inner block is perfect! no puckers, flat as flat can be...and isn't skewed in any way...I want to keep going with the notion I will trim remaining block pieces by 1/8" (which trimmed next 2 pieces already and they square up right together, edge to edge etc.)...So in my mind, If my blocks don't end up 10", who cares anyways??? But I am bugged by my dilema and need some advice please..

    Thank you - Thank you - THANK YOU in advance for considering my problem!!
    bucksie
    bucksie is offline  
    Old 01-19-2011, 07:57 PM
      #2  
    Super Member
     
    Join Date: May 2009
    Location: Merced, CA
    Posts: 4,188
    Default

    The only perfect person died many years ago.

    So relax, good enough is good enough. Do you think your little man will peer at the stitching and drool out that it isn't perfect?
    No, he'll love it because Grandma made it for him.

    Relax, some peoples, Indians and Amish and Mennonites (I think) deliberately put in one wrong thing so they won't be perfect in anything.

    So sew and enjoy it. Show it off and let us see it too. Take pictures of the baby with the finished quilt, and let us see the darling enjoying his "blankie".
    Ramona Byrd is offline  
    Old 01-19-2011, 08:10 PM
      #3  
    Super Member
     
    Join Date: Aug 2009
    Location: The middle of an IL cornfield
    Posts: 7,014
    Default

    It's generally more important to have consistent blocks than blocks of a precise size. If they are all the same, they will sew together in beautiful rows.
    Lisa_wanna_b_quilter is offline  
    Old 01-19-2011, 08:19 PM
      #4  
    Senior Member
     
    Join Date: Jul 2010
    Location: west allis, wisconsin
    Posts: 407
    Default

    sorry i can't help you with your dilema, but i agree with lisa completely. as long as they fit together correctly, they are the proper size! i always cut the triangles for square in a square slightly larger than needed, then trim. better that way than all the frustration.
    happyscrappy is offline  
    Old 01-19-2011, 08:26 PM
      #5  
    Power Poster
     
    Join Date: Mar 2009
    Posts: 15,639
    Default

    The only thime I ever worry about exact sizes is when I participate in a swap. The rest of the time it is important that the blocks are the same size and fit together according to the plan.

    Just to make sure: You are planning to do an all-over quilt-design when finished and NOT stitch in the ditch? Seams pressed open are not good candidates for SID.
    MadQuilter is offline  
    Old 01-19-2011, 09:20 PM
      #6  
    Member
    Thread Starter
     
    bucksie's Avatar
     
    Join Date: Jan 2011
    Location: Washington State
    Posts: 12
    Default

    LOL... your too funny! :lol: No, he won't.....I guess it was more for me...Should I just keep going, since everything is an exact 1/8" bigger, so I can just keep trimming? since my first block, i can re-practice and align scant seam?? what would you do if all is going well and block so far looks great?
    bucksie is offline  
    Old 01-19-2011, 09:22 PM
      #7  
    Member
    Thread Starter
     
    bucksie's Avatar
     
    Join Date: Jan 2011
    Location: Washington State
    Posts: 12
    Default

    Ya, someone else told me (a mother at the daycare i help at) that you can give your grandbaby a piece of cloth, and they'll cherish it forever!....so true that is..as I am finding out..like somehow they know its from one gramma vs the other!
    thanks
    bucksie is offline  
    Old 01-19-2011, 09:23 PM
      #8  
    Member
    Thread Starter
     
    bucksie's Avatar
     
    Join Date: Jan 2011
    Location: Washington State
    Posts: 12
    Default

    oh btw, here is my lil pride n joy,,,I was playing with gimp to fix red eye but to complicated...Until my daughter can fix it for me..
    bucksie is offline  
    Old 01-19-2011, 09:28 PM
      #9  
    Member
    Thread Starter
     
    bucksie's Avatar
     
    Join Date: Jan 2011
    Location: Washington State
    Posts: 12
    Default

    Yes, I am planning on, in fact already starting to enter my "SCARED OUTA MY MIND" mode regarding free motion quilting....I do have a walking foot with guide and thought maybe following rectangle of quilt and keep going seperate lines until done (but not stitch ditch)..but i think i will try a hand at free motion and drop them feed dogs! After all, free motion quilting is why I told my husband i needed a new machine..
    bucksie is offline  
    Old 01-19-2011, 09:29 PM
      #10  
    Member
    Thread Starter
     
    bucksie's Avatar
     
    Join Date: Jan 2011
    Location: Washington State
    Posts: 12
    Default

    urg....I should've used the "quote reply" button huh?.....sorry ..next time!
    bucksie is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    craftybear
    Links and Resources
    1
    05-03-2011 08:49 AM
    craftybear
    Links and Resources
    9
    01-05-2011 01:10 PM
    JEM65
    Main
    24
    09-13-2010 09:43 PM
    Hunnybunny
    Main
    43
    03-06-2010 11:17 AM
    ArtquilterNEWWAYtoQUILT
    Main
    16
    12-11-2007 04:00 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off


    FREE Quilting Newsletter