Marty

OMG I would be petrified use the rotary cutter

Marty

Wow, they do say necessity is the mother of invention.Great idea!

ghostrider

Actually, that means your tension is right, not wrong. You shouldn't be able to just pull on either the top or bobbin thread when the tension is right. :thumbup:

GlitzyMe

Please ask hubby to be very careful when using that seam ripper as a pry lever. The tips can snap right off when you least expect it. This happened to a friend and the tip bounced up and hit her eyeglasses. Good thing she needed them.

Marty

Ab"sew"lutely correct!

suzm

Sorry to hear that you cut into a block. Yes, seam rippers do get dull and some may seem to fit your hand better than others. Get a new "ripper" and try cutting only a few stitches at a time.

Monika

I take out a couple of stitches to make a "hole" in the seam, then turn my seam ripper over and use the little red part to get "in the hole" then just "unzip" the seam, first one way, then the other. It is amazing how quickly it works. Since I started doing this, I don't mind unsewing as much as I used to!

stormatsea45

Yes, seam rippers dull, just like scissors, knives, rotary blades, etc. :-( They are not all equal in the construction either. I like one that has a fine tip on it so you can slide it easily under the stitches. With that said, I usually slip it under and cut every 3-4 stitches along the seam and then pull the thread on the other side of the seam and wal-la the seam is out :thumbup: . You just need to do a little thread picking or use a strip of tape to get off the thread tales and you are ready to resew!

dmarina

I Posted this awhile back: I have read alot about seam rippers on this Board and thought I let you know what works GREAT for me. There are two: an Xacto Knife and a Breakaway/Snap blade Knife. Both are very cheap. Enjoy your day.

Those two WORK GREAT and the price is right. Enjoy

Marty

And equally as dangerous. Sounds like an accident looking for a place to happen. :*)