Go Back  Quiltingboard Forums >
  • Main
  • Is it better as a new quilter to Stitch In the Ditch all blocks First? >
  • Is it better as a new quilter to Stitch In the Ditch all blocks First?

  • Is it better as a new quilter to Stitch In the Ditch all blocks First?

    Old 06-09-2011, 02:59 PM
      #1  
    Member
    Thread Starter
     
    Join Date: Jun 2011
    Posts: 10
    Default

    Is it better to stitch in the ditch all my blocks first and then free hand quilt my designs in each block? I am really new at quilting.
    COTOCOTI is offline  
    Old 06-09-2011, 03:01 PM
      #2  
    Power Poster
     
    Join Date: Feb 2009
    Location: Northern Michigan
    Posts: 12,861
    Default

    you do not have to stitch in the ditch at all unless that is the quilting design you want to do....some people do stitch in the ditch-some do not-
    it is best to baste your quilt well either by needle & thread, pins, or spray basting.
    ckcowl is offline  
    Old 06-09-2011, 03:02 PM
      #3  
    Moderator
     
    Join Date: Jun 2008
    Location: Camarillo, California
    Posts: 35,242
    Default

    Welcome to the board from Southern California!!!
    Jim's Gem is offline  
    Old 06-09-2011, 03:11 PM
      #4  
    Super Member
     
    Join Date: Jan 2010
    Location: West Coast
    Posts: 9,267
    Default

    I don't think so.
    DebraK is offline  
    Old 06-09-2011, 03:49 PM
      #5  
    Member
    Thread Starter
     
    Join Date: Jun 2011
    Posts: 10
    Default

    Thank you guys!
    COTOCOTI is offline  
    Old 06-09-2011, 03:51 PM
      #6  
    Super Member
     
    grammyp's Avatar
     
    Join Date: Feb 2010
    Location: Alabama
    Posts: 2,474
    Default

    As a new quilter I found it easier to echo stitch design elements in the quilt. SID is not as easy as it looks, it is much easier to stitch 1/4 inch inside or outside the seam.
    grammyp is offline  
    Old 06-09-2011, 03:56 PM
      #7  
    Super Member
     
    LucyInTheSky's Avatar
     
    Join Date: Sep 2009
    Location: Seattle
    Posts: 1,743
    Default

    Originally Posted by grammyp
    As a new quilter I found it easier to echo stitch design elements in the quilt. SID is not as easy as it looks, it is much easier to stitch 1/4 inch inside or outside the seam.
    Exactly what I was going to say. SITD is so hard for me, since I'll be on one side of the seam, then the other, then back, and it looks icky. Whereas slightly in, following the shape of the block, much better results.
    LucyInTheSky is offline  
    Old 06-09-2011, 04:01 PM
      #8  
    Senior Member
     
    Parrothead's Avatar
     
    Join Date: Jun 2010
    Location: Full Time RV'er
    Posts: 485
    Default

    Originally Posted by grammyp
    As a new quilter I found it easier to echo stitch design elements in the quilt. SID is not as easy as it looks, it is much easier to stitch 1/4 inch inside or outside the seam.
    I also like the look of this better. Many of the vintage quilts were quilted with the echo. It was much easier at a quilting bee for everyone doing the same thing. There were probably some ladies that had a hard time following a design. I had never heard of SID until I had one quilted several years ago and this was how it was done.
    Parrothead is offline  
    Old 06-09-2011, 04:14 PM
      #9  
    Super Member
     
    bluteddi's Avatar
     
    Join Date: Sep 2010
    Location: MN
    Posts: 2,411
    Default

    I have been quuilting for several years and last week I SITD for the first time.. and now I know.. I will NOT be doing THAT again anytime soon... it is HARD~~~~!!

    Stitch what u want..... prehaps baste it in place if ur worried it might move... personally I use safety pins
    bluteddi is offline  
    Old 06-09-2011, 04:32 PM
      #10  
    Power Poster
     
    Join Date: May 2009
    Location: NY
    Posts: 10,590
    Default

    Hi and welcome to the board. Both Harriett Hargrave and Diane Gaudinski recommend that when machine quilting to SID at least some to stabalize the quilt. It also allows you to remove some of the weight of all the safety pins before trying to FMQ. You don't need to SID around each piecing element. They recommend at least around the peremeter of each block. I know it made it a lot easier for me to do that prior to FMQ other elements and really did reduce shifting and puckers. But I also heartily agree with the previous posters that it is much easier to stitch right next to the ditch, like 1/8" away. Either way, you should at least do some kind of stabalizing stitching before FMQ elements and background work, unless you are just going to an all over meander, then it probably isn't necessary.
    feline fanatic is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    BirdyFeathers
    Main
    7
    05-14-2013 01:42 PM
    Silvia75
    Main
    28
    03-30-2013 04:23 PM
    Chester the bunny
    Main
    11
    08-23-2011 07:14 PM
    Ann K
    Main
    3
    12-12-2010 03:18 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off


    FREE Quilting Newsletter