Go Back  Quiltingboard Forums >
  • Main
  • back to square one with machine purchase >
  • back to square one with machine purchase

  • back to square one with machine purchase

    Old 01-23-2012, 04:21 AM
      #31  
    Member
     
    Join Date: Apr 2011
    Posts: 15
    Default

    You need to find another Janome dealer! I bought mine 2 years ago for $1300, including the extra accufeed feet. I did not get the table. They should be less than that, now that the 7700's are out.
    happyred10 is offline  
    Old 01-23-2012, 04:38 AM
      #32  
    Super Member
     
    Amythyst02's Avatar
     
    Join Date: May 2011
    Location: Phoenix, AZ.
    Posts: 1,342
    Default

    Look into used or floor models. There have been alot of new machines come out recently which would mean you should get a great deal on the floor models. And of course folks are trading in their old machines for the newer models. Normally there is nothing wrong with either type of machine, just newer models taking their place. Good luck in your search.
    Amythyst02 is offline  
    Old 01-23-2012, 05:25 AM
      #33  
    Member
     
    Join Date: Apr 2011
    Location: Flint, MI
    Posts: 82
    Default

    Sorry about that Janome dealer. If there are any other ones close, try them because most of them have the ability to adjust their own pricing. Just a thought.
    Charlie
    charlie 1940 is offline  
    Old 01-23-2012, 05:27 AM
      #34  
    Super Member
     
    Join Date: Aug 2011
    Location: Missouri
    Posts: 1,250
    Default

    I would stay with the Bernina. After having a Bernina I don't think you would be satisfied with anything else.
    Check out the Bernina dealers online. There maybe someone that carries Bernina you were not aware of.
    You can always buy a used Bernina, more affordable. Also older models have less bells and whistles.
    Pieces2 is offline  
    Old 01-23-2012, 05:32 AM
      #35  
    Super Member
     
    jitkaau's Avatar
     
    Join Date: Aug 2010
    Location: Australia
    Posts: 4,116
    Default

    I replaced my Pfaff with a Brother. I am very happy with the machine.Why not give the Brother machines a look?
    jitkaau is offline  
    Old 01-23-2012, 07:19 AM
      #36  
    Super Member
     
    Caswews's Avatar
     
    Join Date: Feb 2011
    Location: Quilting, crocheting, sewing and crafting in my Sewing Room...Peaceful and wonderful !!
    Posts: 5,317
    Default

    I have had Brother machine and still do have 2. I have very little problem with them, one I am taking in for service as it hasn't been in 5 years so it will need some cleaning. I just found a Riccar that I had and not sure why I switched to Brother after the Riccar, but glad I did. I had a kenmore for 20 years, and that was the very good machine, next to the Brother machines. I like the Brother reliability for sure ..
    Caswews is offline  
    Old 01-23-2012, 07:32 AM
      #37  
    Super Member
     
    Join Date: Aug 2007
    Location: Clay Springs AZ
    Posts: 3,229
    Default

    Wow, after reading the blog on pet peaves and noticing the number one complaint is running out of bobbin thread and not knowing it, Im glad I have a drop in bobbin.
    I can see when my bobbin thread is low.
    Rose Marie is offline  
    Old 01-23-2012, 07:52 AM
      #38  
    Super Member
     
    amandasgramma's Avatar
     
    Join Date: May 2009
    Location: La Pine Oregon, USA
    Posts: 5,907
    Default

    Are you planning on FMQ on your machine? If not, the Janome Jem Platinum 760 is a great little machine -- price last time I checked is less than $600. -- It's too small for quilting anything other than a lap quilt though. I've had mine for over 5 yrs and it's a real workhorse - never given me problems.
    amandasgramma is offline  
    Old 01-23-2012, 08:24 AM
      #39  
    Member
     
    Join Date: Dec 2011
    Posts: 2
    Default

    Originally Posted by jillmc
    Went to Janome dealer this am and test-drove the 6600. It was ok. Has a lot of bells and whistles that I will most likely not use. And the dealer wouldn't budge from the 1600 price. I need to replace my Bernina 930. May go back to the Bernina dealer to explore other options. My budget is $1000.....fancy stitches are not required. Any advice on where to start??? I didn't really care for the Bernina dealer when I stopped by a few months ago-she just pushed the $4000 QE, and I made it perfectly clear it was out of my budget. Unfortunately,only one dealer in this area.............sigh.
    Just purchased floor model Brother 950D. Lots of stitches and even has 4x4 Embroidery Hoop. Floor model was 549, New in Box would be 799. This is my second Brother and Love, absolutely Love my Brother.
    mrsrabbit01 is offline  
    Old 01-23-2012, 08:24 AM
      #40  
    Senior Member
     
    kellen46's Avatar
     
    Join Date: Aug 2010
    Posts: 811
    Smile Let me ditto this post.

    [QUOTE=DawnFurlong;4897449]I had been researching the same thing. I wasn't overly impressed with the 6600, did have a Viking Sapphire turn my head - but I already have a machine that has over 200 decorative stitches that I never use. I really considered what it was I was needing. For me the answer was a larger harp space and great straight stitch. Juki and Brother owners seem to love their straight stitch machines, by and large. I am going to go with the Brother PQ1500s. I was able to test drive one at a local dealer. However, their price is at least $300 above, depending on if they are running a sale or not, than what I can find online (both Amazon and AllBrands sell this same machine). I have searched the threads and the vast majority of people who have bought from AllBrands are very happy with their purchases and service. I like Amazon, but last I checked, their price was a little higher than AllBrands as well. I am also happy that the machine will be so straight forward, there really isn't a lot to go wrong with it. I anticipate it serving me well for many years! Price online from AllBrands - $599 plus free shipping, no tax.


    I too bought this machine from AllBrands. I am very pleased with it. I have a Bernina440 which I love to sew on but wanted a machine with a larger harp to do quilting. It is amazing how much easier those few inches make things. I like the larger harp, the auto thread cutter, and the strong motor. My only issue was the walking foot that came with the machine does not have a place in the back to put a quilt guide. I solved that by getting a Janome high shank walking foot. I even used the Brother to paper piece a spider web quilt. The auto thread cutter saved me lots of time and effort not to mention thread. So if you have a high end machine or don't want one this is a great buy. If I had to do over however I would have spent the extra one-hundred dollars to get the needle adjustment feature. But it is not a big deal. I like the pin feed feature and am planning on using it with some faux leather handbags.
    kellen46 is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    BrendaK
    Main
    59
    11-14-2016 02:31 PM
    JudyMN
    Main
    4
    10-23-2013 03:09 PM
    susaninkansas
    Main
    13
    10-15-2012 09:11 AM
    dhanke
    Pictures
    37
    06-29-2012 10:46 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off


    FREE Quilting Newsletter