Cre8tvlwyr

I went out of town a couple of days and just got back to this thread ... there have been so many many wonderful blocks posted since I left...WOW. Yep Tyme - love the way you did your A-1 and also perfect circles!!

Are you using Karen Kay Buckley's "perfect circles" as well?? There are so many ways of making circles. I think the key is to have something firm or sturdy to be able to put a perfect crease in your fabric - whether you use an iron or your fingernail [I've done both.] Pearl Periera puts a pattern on a type of freezer paper and irons it to another piece of freezer paper [marking to the inside] before cutting it - that way the ink doesn't run and you have a stiffer template. My friend, Rita Verroca laminates her pattern pieces. You can run a thread around a circle to make a yo-yo shape and needle-turn gathered side down.

Another hint for cutting flying geese - a waste-free method that is my favorite - Patti Anderson has copy written these directions so I will simply direct you to her instructions
http://www.patchpieces.com/files/flyinggeese.pdf

Since I just got home - and I haven't done the three blocks yet myself - I will end now. I was given a list of blocks, which like A1 need to be "mirrored" if you want to have your blocks look like Jane. I will post these shortly.
Gus

JudyTheSewer

Thank you Linda. Yes, I like how it looks too. I also noticed the piecing nastiness for the foundation piecing! I have not done the actual printing of the block yet for foundation piecing but when I saw how difficult it looked I was wondering if Nancy's view (post #218) of making triangles would simplify the construction? I might do a "file > print > Block" rather than "file > print > Foundation Pattern" and then cut the block up myself into 8 triangles like Nancy showed and then the 4 triangle corners; that might be easier for me. Let me know how yours goes since I'm sure you'll be stitching before I am!

GV09

Thank's for sharing that with us!
A big hug!

GV09

I love your blocks! Looking great!
Thank for sharing A1 new idea! I love it! I think I'll try it!
A big hug!

Cre8tvlwyr

Echoemb - what do you mean "points not coming out" in A1?? Tyme has it exactly right! I looked at the flicker pics that Nancy linked us to and compared the original DJ with both Thatquilt.com and the DJ software. The original was very wonky - no perfect triangles nor do all of them come to points - this adds character! love it

Now that I read everything I missed..... I see this was originally "motomom's" idea - I don't see her on my list she has created a separate couple of DJ threads with some interesting stuff too.

Thanks to both - you are totally right!

QuiltnNan

Yes, Gus. These are the exact instructions I used. I posted it under Links and Resources last week as I was working on the geese then Welcome home.

DottyD

I know we are a long way from finishing - well there may be a few of us getting nearer !!!! ---- but I found this link re the scallop edges so thought I would post it now - 'cos I know I will forget further down the way.
http://lindafranz.com/section/scallops/38
Worth keeping I think for future reference.
Regards,
DottyD.

QuiltnNan

OK gals.... I drafted the orig A1 at 4.5" block in EQ5 and wanted to find an easier way to construct it.
[ATTACH=CONFIG]307439[/ATTACH]
First, I worked on the center square on point discussed earlier. Sew 2 - 2"x12.5" strips together and press open. I don't have a 45 degree triangle ruler. So I used my 45 degree angle on my straight ruler. Mind you, this does not have the tip cut off like some triangle rulers, so the tip is included in the strip measurements. I cut 8 triangles alternating turning upside down. I sewed them together to make this
[ATTACH=CONFIG]307437[/ATTACH]
I then used my block printout and cut out the center square on point. I trimmed this back to that size making sure to add the seam allowances. So the overall trim size comes to 3 7/8" square. My block came out just a hair small, so you might want this trim to be 4" square.
[ATTACH=CONFIG]307440[/ATTACH]
This is now my final block, which is a tad small. When I redo it, I will make the corner squares 1.75" and the tiny triangle 1.25" instead of the 1 3/8 in this block... it seems a tad large on this block. The setting triangles should be cut from 2.25" squares cut corner to corner.
[ATTACH=CONFIG]307442[/ATTACH]

brookemarie19

QuiltnNan, thanks so much for showing how you have made this block! I am planning on attempting this way. I like the circular look of this one. I tell ya, this group is awesome! I would never have been able to find out how to do this one on my own. You guys are great!

KR

I redrafted several of the triangles to eliminate the BF border. Mainly because I'll be using BF for the alternating triangles (like Lacelady's) and thought it would be too much "white" space. But also it decreased the number of pieces! :-) Then spray starched each one before trimming.

RE using different fabrics.....each of my blocks is a different fabric. For the triangles I chose mid-tones of those used in the blocks so the borders would look visually balanced. The corners are all reddish patterns. Cornerstones and binding will be another coordinating red.

Went back through all the blocks this weekend and cut out the BF behind appliqued pieces. I'm strongly considering hand quilting and this will eliminate a layer. Now back to putting on sashings.

Your blocks are all looking soooo good! Keep up the great work, ladies!!

PS: If you haven't already, you might want to check out www.thatquilt.com as a reference for constructing blocks. I don't care for her freezer paper method but many times used her sequences of construction.