Cleaning and repairing the Shellac clear coat on Vintage sewing machine heads

Reply Subscribe

Page 3 of 72

Last »

Thread Tools

07-05-2012, 08:46 AM

#21

Glenn

Super Member

Thread Starter

Join Date: Mar 2010

Location: Huntsville, AL

Posts: 2,609

Quote:

Originally Posted by jeaninmaine

Thanks for the great tutorial, Glenn. I have a few machines that have to cleaned and these directions are just what I need. What kind of gold paint did you use to touch up the lettering?

I used a testors gold paint pin, then used a fine artist brush dipped in the paint on the felt of the pin

07-05-2012, 08:50 AM

#22

Glenn

Super Member

Thread Starter

Join Date: Mar 2010

Location: Huntsville, AL

Posts: 2,609

Quote:

Originally Posted by Charlee

Skip...YOU ROCK!!

Thank you!!

I still haven't figured out how to handle the finish on the Köhler...I think I may end up touching up the lettering, letting the base decals alone, and applying shellac to clear coat and preserve what's left of them.

You did a great job on that slide plate...that had some ugly to it when I sent it to you!

Charlee that is about all you can do with the poly. I did not mess with the bed decals either I figure it is wear from using the machine for many years and it would have been very diff to paint all the missing decal there on the front side of the bed. It gives the machine character..... I could not stand the pin rash and just had to something with it.
Skip

07-05-2012, 09:11 AM

#23

jbj137

Super Member

Join Date: Dec 2009

Location: Duncan, SC, 29334 USA

Posts: 4,580

You are so Smart & Dedicated to the restoring art.
You did a beautiful job.
J J

07-05-2012, 09:47 AM

#24

miriam

Power Poster

Join Date: Mar 2011

Location: Somewhere

Posts: 15,506

This needs to go on a sticky!!!

07-05-2012, 10:22 AM

#25

Glenn

Super Member

Thread Starter

Join Date: Mar 2010

Location: Huntsville, AL

Posts: 2,609

Quote:

Originally Posted by Caroline S

My candidate for Glenn's Method, the Brunswick. Too bad that the cabinet is beyond repair.

Caroline you have a very good machine for my method of cleaning and bringin it back. Just make sure sure you clean the mechanics first then after the dish soap bath clean the decals with sewing machine oil then wipe the thing down with naptha to remove the oil. Now you can to the shellac tech. Have fun with it.
Skip

07-05-2012, 10:41 AM

#26

miriam

Power Poster

Join Date: Mar 2011

Location: Somewhere

Posts: 15,506

You'll be surprised how nice these machines take to this kind of treatment. Here is a Vindex Special Glenn coached us through.
[ATTACH=CONFIG]346868[/ATTACH]
[ATTACH=CONFIG]346869[/ATTACH]
[ATTACH=CONFIG]346870[/ATTACH]
I don't have a before picture but I have an almost before picture. It is a pic of one in the condition the Vindex Special was in - it is setting in front of the Vindex Special:
[ATTACH=CONFIG]346871[/ATTACH]

Attached Thumbnails

Click image for larger version

Name: vindex special refinish makeover 4-9-12 018.JPG
Views: 6339
Size: 127.5 KB
ID: 346867

Click image for larger version

Name: April 19, 2012 Martha's 185 & 301 my 128 & 66 001.JPG
Views: 5117
Size: 129.6 KB
ID: 346868

Click image for larger version

Name: April 19, 2012 Martha's 185 & 301 my 128 & 66 007.JPG
Views: 4336
Size: 130.8 KB
ID: 346869

Click image for larger version

Name: April 19, 2012 Martha's 185 & 301 my 128 & 66 011.JPG
Views: 4400
Size: 126.0 KB
ID: 346870

Click image for larger version

Name: 40 out of 65 CL machines 4-22-12 074.JPG
Views: 4963
Size: 131.2 KB
ID: 346871

07-05-2012, 11:02 AM

#27

jeaninmaine

Super Member

Join Date: Jan 2011

Location: Maine, Where else!

Posts: 1,526

Thanks Glenn. I've saved all this so that I'll have it whenever I need it.

07-05-2012, 02:37 PM

#28

Glenn

Super Member

Thread Starter

Join Date: Mar 2010

Location: Huntsville, AL

Posts: 2,609

If your machines are fairly clean and the decals are good. Before you try my method please go to MUV's video on cleaning vintage machines. She is extremely good at cleaning the old ladies. My methods are for really grimey and machines that are in rough shape. MUV knows a lot about these machines and has the same love for them as I do. Please do look at her videos first so you can make a choice as which way to go. Thank you..
Skip