Go Back  Quiltingboard Forums >
  • Main
  • For Vintage & Antique Machine Enthusiasts
  • Should I overhaul my Singer 401A or purchase a Janome 2012? >
  • Should I overhaul my Singer 401A or purchase a Janome 2012?

  • Should I overhaul my Singer 401A or purchase a Janome 2012?

    Old 10-19-2012, 05:59 PM
      #11  
    Senior Member
     
    happyquiltmom's Avatar
     
    Join Date: Jan 2012
    Location: NE Indiana
    Posts: 564
    Default

    My 401A is my "go-to" machine and I would be lost without it! I've had it since I graduated from high school and have learned to fix it myself. My DH even replaced the motor brushes once.
    happyquiltmom is offline  
    Old 10-19-2012, 06:56 PM
      #12  
    Senior Member
     
    Join Date: Apr 2012
    Location: Jersey Shore
    Posts: 528
    Default

    I don't understand the 185 dollar quote. That is excessive. Try to oil it and grease it yourself. It's fairly easy and it will run fine. Worse thing that could happen is that the timing is off or the bobbin winder spring is broken...
    DanofNJ is offline  
    Old 10-19-2012, 09:49 PM
      #13  
    Junior Member
     
    Join Date: Sep 2012
    Posts: 134
    Default

    i have a 503a, which is fairly similar to the 401. it's the only machine i've ever had, never needed any repair and i bought it at an estate sale in 1989. since then i've made a zillion kids' clothes and at least a dozen quilts and a few craft-type projects. i'd try oiling and greasing it yourself and asking here if that doesn't do the trick. there's a wealth of advice here and i imagine people could guide you in anything else that might be wrong if oiling/greasing doesn't work.

    if it were me, i'd probably restore your mom's machine just for sentimental value.
    oregongirl is offline  
    Old 10-20-2012, 07:20 AM
      #14  
    Super Member
     
    k9dancer's Avatar
     
    Join Date: Aug 2010
    Location: Mena, Arkansas
    Posts: 1,351
    Default

    Go for the 401 rehab or send it to me; I'll give it a good home!
    k9dancer is offline  
    Old 10-20-2012, 07:53 AM
      #15  
    Super Member
     
    oldtnquiltinglady's Avatar
     
    Join Date: Aug 2011
    Location: Lafayette, TN
    Posts: 1,204
    Default

    Sewing machine repair people (in shop type) are my worst of all worlds "go to" people. I know they need to make a living, but "make a payment on their new BMW"; no thank you ma'am or sir. Did he see "idiot" tattooed on your forehead, or is your machine in that bad shape? I am like many on this board, I have studied their comments and pictures and learned a lot on how to service and repair sewing machines. Thank you one and all..... At $180, you can buy lots of new parts via internet and be a lot smarter in the long run too. I love working on the old "treasures" and getting them working, and an old Singer beats any new one hands-down on a smooth, even straight stitch, which is absolutely necessary to you as a quilt piecer. I say go for the "learning, do-it-yourself" and keep your mama's machine. And, failing that, tell me where you live and I might buy it from you.
    oldtnquiltinglady is offline  
    Old 10-20-2012, 10:14 AM
      #16  
    Super Member
     
    Join Date: Feb 2012
    Posts: 8,091
    Default

    Originally Posted by Gigigigina
    I have my mother's 401a and is going to cost $179.00 to overhaul and put in good shape. I am planning on sewing crafts, beginning quilting, and some home decor projects. Should I have the overhaul performed or purchase the Janome 2012 (my price range for a new machine)? The Singer has never been serviced and was having serious tension problems.
    OK, I did not read everybodies posts between yours and this one. So I'm gonna risk saying something that's been said before or asking something that's been asked already.

    What exactly does the machine need that's going to cost nearly $200.00 to fix?

    You can do cleaning and maintenance yourself. The tension problems could be nothing more than old oil, dirt, lint, fuzz and thread in the top tension and bobbin areas. Nothing you can't clean yourself. The owners manual gives detailed info on lubing the machine. There are other threads here, including one I did with pics, showing where to put oil and grease.

    There are sites on the web such as TFSR that give very detailed instructions on disassembly, cleaning, fixing, reassembly and adjusting the tensions.

    I'm just asking, not trying to be a smart arse.

    Now to answer your post title question: "Should I overhaul my Singer 401A or purchase a Janome 2012?? Yes.


    Joe
    J Miller is offline  
    Old 10-20-2012, 02:34 PM
      #17  
    Member
    Thread Starter
     
    Join Date: Oct 2012
    Location: Beautiful Orygone
    Posts: 11
    Default

    Thanks everyone for your input so far. The needle bar is very sloppy, the machine is skipping stitches and yes...the machine is very dry and desperately needs oiling and greasing.
    Gigigigina is offline  
    Old 10-20-2012, 03:16 PM
      #18  
    Super Member
     
    thepolyparrot's Avatar
     
    Join Date: Nov 2010
    Location: Mars
    Posts: 2,549
    Default

    I would *definitely* overhaul the 401. I have two of them and have given away a third. It's the machine I learned to sew on and if you're not feeding it a steady diet of canvas and jeans, it will be a wonderful machine to learn on.

    You can buy additional attachments and cams (although I don't think you really need the cams - most of my sewing is straight-stitching with the occasional blind-hem stitch - I'm pretty sure that's built in to the 401) If you look on eBay, pretty full sets of attachments and cams for the Touch & Sew machines go for a song. The white cams and the chain-stitcher sets from those machines won't work on your 401, but the black cams and the other slant-shank attachments will be just fine. Usually a lot less expensive than the sets made and marketed for the 401, too.

    You're not going to be able to buy as sturdily built and versatile machine as the 401 for what it's going to cost you to refurbish it.

    And you might save even that, if you like to tinker around with machinery (which I absolutely love as much as I love sewing! LOL! ) You might find that it's fun for you, too.

    Have fun with your old gal - nobody makes 'em with that quality any more.
    thepolyparrot is offline  
    Old 10-20-2012, 03:41 PM
      #19  
    Junior Member
     
    overdew's Avatar
     
    Join Date: Jan 2010
    Location: Northeast TX
    Posts: 272
    Default 401a is a great machine!

    Originally Posted by Gigigigina
    I am a new member here at Quiltingboard and am sensing that with all the online manuals and help here at "QB" , I just might be able to do it myself!
    There is a ton of info on the net about this machine. The main problems can be solved with cleaning and oiling the machine. The decorative stitch controls on my $25 one were "stuck" from not being used. There is a great video about where to oil to restore movement. These machines have no belts, and all metal gears. These gears love oil. The slant needle makes a lovely stitch and you can get excellent speed from these machines. That price for adjustments is and oiling is outrageous, imho.
    overdew is offline  
    Old 10-21-2012, 03:36 AM
      #20  
    Power Poster
     
    Join Date: Mar 2011
    Location: Somewhere
    Posts: 15,506
    Default

    I learned a lot about repairs on one. Here is a service manual link: http://parts.singerco.com/IPsvcManuals/306W25.pdf
    you will have to scroll down 125 pages to find it though.
    There is a LOT of information right here on QB - you might need to do an advance search. Several of us on here can tell you how to do that $180 job for nothing but your own labor. http://www.youtube.com/watch?v=zFE4I..._order&list=UL
    http://www.youtube.com/watch?v=4sEr3...eature=related
    If you run into any problems please post a pic and some idea what isn't working - we'll try to help.
    miriam is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Fledrmaus
    For Vintage & Antique Machine Enthusiasts
    24
    06-20-2017 03:44 PM
    Watson
    Main
    40
    03-11-2016 06:54 PM
    Blackberry
    For Vintage & Antique Machine Enthusiasts
    19
    06-11-2014 06:28 AM
    miriam
    For Vintage & Antique Machine Enthusiasts
    154
    03-12-2014 07:43 AM
    Gigigigina
    Main
    13
    10-20-2012 08:55 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is Off
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off


    FREE Quilting Newsletter