Go Back  Quiltingboard Forums >
  • Main
  • Does Your Long Armer Keep Your Extra Backing Material?  Not sure if this is normal?? >
  • Does Your Long Armer Keep Your Extra Backing Material? Not sure if this is normal??

  • Does Your Long Armer Keep Your Extra Backing Material? Not sure if this is normal??

    Old 11-29-2012, 06:39 PM
      #21  
    Super Member
     
    hopetoquilt's Avatar
     
    Join Date: Aug 2010
    Location: New Jersey
    Posts: 2,860
    Default

    The last time I had a panto done, it required that she go over the side a good bit to do the design properly. Could this be what happened?
    hopetoquilt is offline  
    Old 11-30-2012, 04:46 AM
      #22  
    Member
     
    Join Date: Aug 2011
    Location: Grove City, OH
    Posts: 18
    Default

    I am a Longarm Quilter. I would not keep any trimmings from a customers quilt, BUT:
    If your backing fabric was not cut straight and square your quilter may have needed to trim it to square it up. You can't load it if the top and bottom edges are not straight and parallel to each other. If you did there would be uneven tension on the fabric.
    I also try to load the top closer to the top edge of the backing so there is more of a safety net at the bottom. This may have accounted for the single trimming she did return,it would have come from the bottom.
    Also remember that the finished dimension of the quilt will be less than the original dimensions. The quilting alone can cause the dimensions to 'shrink' a few %. This effect would be equal in the top and back but if you just measured the backing before and after the quilting you should expect to see a few inches 'disappear.
    Most importantly talk to your quilter. He or she wants you to be satisfied with the results.

    Last edited by patricej; 11-30-2012 at 08:06 AM.
    tomb is offline  
    Old 11-30-2012, 05:25 AM
      #23  
    Super Member
     
    Weenween's Avatar
     
    Join Date: Dec 2010
    Location: Campton,Kentucky
    Posts: 1,397
    Default

    Originally Posted by AngelinaMaria
    I've only used 2 LA's so far and just got a quilt back from one of these and she delivered the quilt with the extra backing already trimmed down to about 1 to 2 inches from the quilt top. I made this backing really big so I know there would have been at least 5 to 6 inches extra around most sides. I was given one strip of the backing material but not the other 3 sides?? I had planned on using this extra material for the binding and now I won't be able to.

    I wasn't home when the quilt was delivered so I couldn't ask directly about this and she had a death in the family this week so I hate to ask at this time. I know I should just send an email asking about it, but I am worried she either threw it out or kept it and I just don't want to make her feel worse than she does right now. The quilting did turn out lovely so I am happy about that.
    I agree with Bellaboo.She should understand that you need the scraps so to speak to finish it,without having to buy more.
    Weenween is offline  
    Old 11-30-2012, 05:33 AM
      #24  
    Senior Member
     
    Join Date: Jun 2012
    Location: Greenwood, AR
    Posts: 456
    Default

    I always get my extra back...I have just started asking my LA'er to trim the quilt because I've had king size quilts that I can't trim on my little cutting table...I pay extra for them to trim them and they are done very close...I have also paid extra to have them sew my binding on the front (I hand stitch to back). I have only used a total of 4 LA'ers...2 in Wisconsin, 1 who always trimmed the quilts and returned the trimmings and the other who didn't trim unless asked (and charged extra) and returned the trimmings. I have now used 2 LA'ers in Arkansas with also the same results...I would definitely request my trimmings back....I usually don't bind with the extra but it does get used and the extra batting is ALWAYS used, ie mug rugs, coasters, etc.
    DebbieG is offline  
    Old 11-30-2012, 05:42 AM
      #25  
    Super Member
     
    Join Date: Aug 2011
    Location: Missouri
    Posts: 1,250
    Default

    I would just send her an email. Explaining you plan to use the fabric for the binding. Drop the fabric off or mail it to you.
    If you take anymore quilts to her I would tell her up front not to trim your quilt.
    My LAQ never trims mine.
    Pieces2 is offline  
    Old 11-30-2012, 05:45 AM
      #26  
    Super Member
     
    Join Date: Dec 2011
    Location: Horse Country, FL
    Posts: 7,341
    Default

    My LAer returns everything not used. I just used some "leftover" batting in a tablerunner. It was the perfect length and width I needed!!
    coopah is offline  
    Old 11-30-2012, 05:47 AM
      #27  
    Member
     
    needlefruit's Avatar
     
    Join Date: Oct 2010
    Location: Heart O'Texas
    Posts: 83
    Default

    Have to jump in here---as most of you know, a backing needs to be at least 6" longer and 6" wider than the top for longarm mounting. When the backing is so big that there are more than about 4" on either side (extra at the top & bottom doesn't matter), I trim off the excess BEFORE mounting the quilt. It is extra work for your longarmer when the backing is way oversize, and some longarmers charge for trimming; the whole problem can be solved by sending the correct size backing with the top! BTW, when I do have to trim backing, the long narrow strip ALWAYS goes home with the completed top.
    needlefruit is offline  
    Old 11-30-2012, 05:54 AM
      #28  
    Super Member
     
    WMUTeach's Avatar
     
    Join Date: Dec 2010
    Location: Portage, Michigan
    Posts: 7,506
    Default

    No she does not. It belongs to the quilter maker not the professional who does the quilting. When I got my finished quilt back I also got the extra backing and the extra batting.
    WMUTeach is offline  
    Old 11-30-2012, 06:20 AM
      #29  
    Super Member
     
    alleyoop1's Avatar
     
    Join Date: Oct 2010
    Location: Virginia
    Posts: 1,355
    Default

    I had a quilt done by a long arm quilter and she did not trim it. Ask for it back. If she threw it away, maybe you can find more at your local fabric store.
    alleyoop1 is offline  
    Old 11-30-2012, 06:37 AM
      #30  
    Super Member
     
    Join Date: May 2012
    Location: Central Wisconsin
    Posts: 4,391
    Default

    I had my first quilt long-armed last summer. He did a good job, but did not return the excess. I had sent a king size batt, 120 x 120 inches. and expected about 120 x 30 inches back. I called them, and it wasn't right away. I had to stew a little first LOL. They said they still had it. The next time I was there, I forgot about asking for it. So I called them and asked if it was still there, and it was. They had just had a big blow-out sale, so I was concerned. I did pick it up later. It was stuffed into a bag, so I had to smooth it all out and roll it up so I could use it again. I butt those ends together and use as much as I can in charity quilts, and in family quilts as well.

    I make pillows with all the little itty bitty ends and pieces of batting. I have a box under my table near the sewing machine, and whenever I have a little piece of batting in my hand, it can go easily into the box. Then once a year or so, I sew up a pillow ticking and stuff it. My local food pantry gives them away.
    maviskw is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    x7lillies
    Main
    14
    05-29-2014 04:32 PM
    AngelinaMaria
    Main
    56
    10-21-2012 06:26 AM
    appliquequiltdesigns
    Main
    8
    09-23-2012 03:16 AM
    Cat18
    Main
    134
    12-25-2010 09:00 AM
    sew cornie
    Main
    6
    10-19-2010 08:37 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off


    FREE Quilting Newsletter