Vintage Sewing Machine Shop Machine Photos
02-27-2013, 07:04 PM
#992
Super Member
Join Date: Jan 2011
Location: Knot Merrill, Southern Indiana
Posts: 5,781
Just picked this one up. Wasn't in the market for this model ... but couldn't pass it up for $35.
Needs a slide plate over the bobbin area. The wood on the top will need to be worked a bit as they had it positioned in the sun. Drawer full of bobbins and a bobbin case in one of the drawers, as well as a belt - but no attachments. Will need needles as well. The drawer assembly on the left side is loose and will need to look at that - think it just needs to be fixed to the screw hole in the irons. Irons are in great shape. I haven't lifted the machine up, but everything moves freely from the top and I looked underneath with a flashlight and didn't see any glaring problems.
SN FR2470727 ... best I can find so far is between 1914 and 1917
Any recommendations to source the missing slide plate? I saw one on E-bay but wondering if there are other sources. I checked Sew-Classic but didn't find one.
Oh ... I'm "guessing" that the bobbin winder operates by positioning so the groove fits into the treadle belt??
Needs a slide plate over the bobbin area. The wood on the top will need to be worked a bit as they had it positioned in the sun. Drawer full of bobbins and a bobbin case in one of the drawers, as well as a belt - but no attachments. Will need needles as well. The drawer assembly on the left side is loose and will need to look at that - think it just needs to be fixed to the screw hole in the irons. Irons are in great shape. I haven't lifted the machine up, but everything moves freely from the top and I looked underneath with a flashlight and didn't see any glaring problems.
SN FR2470727 ... best I can find so far is between 1914 and 1917
Any recommendations to source the missing slide plate? I saw one on E-bay but wondering if there are other sources. I checked Sew-Classic but didn't find one.
Oh ... I'm "guessing" that the bobbin winder operates by positioning so the groove fits into the treadle belt??
03-01-2013, 05:35 AM
#997
Super Member
Join Date: Nov 2006
Location: las vegas nv.
Posts: 2,452
My New Old ladies.....
I don't think I have shared these yet....and the last pic is one I am currently waiting on its arrival . I guess you could say i sorta went on a buying spree...but darn when the deals come up you just gotta grab them...right?
03-01-2013, 07:35 AM
#998
Junior Member
Join Date: Sep 2010
Posts: 108
03-01-2013, 08:57 AM
#999
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
just thought I would share a photo of my first Elias Howe Treadle in working order
[ATTACH=CONFIG]398968[/ATTACH]
and in this shot you can see an Elias Howe, a Singer, a Willcox & Gibbs, and a Wheeler and Wilson all are pre-1900
(Now I just need a Grover and baker....sigh)
[ATTACH=CONFIG]398970[/ATTACH]
[ATTACH=CONFIG]398968[/ATTACH]
and in this shot you can see an Elias Howe, a Singer, a Willcox & Gibbs, and a Wheeler and Wilson all are pre-1900
(Now I just need a Grover and baker....sigh)
[ATTACH=CONFIG]398970[/ATTACH]
Thread
Thread Starter
Forum
Replies
Last Post
Lostn51
For Vintage & Antique Machine Enthusiasts
44789
01-17-2016 05:34 AM
Caroline94535
For Vintage & Antique Machine Enthusiasts
4
07-03-2015 07:29 PM
Candace
For Vintage & Antique Machine Enthusiasts
14
12-09-2013 07:55 AM
danandsassy
For Vintage & Antique Machine Enthusiasts
17
05-14-2011 06:26 AM
