Bearding problem
#21
I just looked through the hobbs's website and see absolutely nothing about right side/wrong side of any of their batts.
I've never seen it on labels either. I'd really appreciate some documentation, until I do, I'll consider it myth.
The only quilt I've had beard is now about 20 years old a scrappy gift. Over the years I've picked off a ton of bearding, which only occurrs on some of the fabric. Visual tells me it is the looser woven fabric bearding. Many expensive homespuns are loosely woven and they cost plenty so 'cheap' isn't the problem
I've never seen it on labels either. I'd really appreciate some documentation, until I do, I'll consider it myth.
The only quilt I've had beard is now about 20 years old a scrappy gift. Over the years I've picked off a ton of bearding, which only occurrs on some of the fabric. Visual tells me it is the looser woven fabric bearding. Many expensive homespuns are loosely woven and they cost plenty so 'cheap' isn't the problem
#22
Junior Member
Thread Starter
Join Date: Sep 2012
Posts: 109
I am researching wool bat construction online and apparently the Dream Wool is bonded on one surface side whereas the Hobbs Wool is bonded throughout so there would not be a good and bad side with the Hobbs...
I will call these companies on Tuesday to get more info.
But for now I am off to do my double layer wrong sides together experiment with my Dreamwool.
Lainey
I will call these companies on Tuesday to get more info.
But for now I am off to do my double layer wrong sides together experiment with my Dreamwool.
Lainey
#24
Senior Member
Join Date: Dec 2012
Location: Arkansas
Posts: 559
I have had bearding on a quilt using polyester batting. The quilt was comprised of darks and black on top and black on bottom. Utilizing black batting might have made it less noticeable. Possibly very tightly woven fabrics might have been the answer. Sure, one wants to be proactive in their planning, eh?
#25
Super Member
Join Date: Dec 2011
Location: Horse Country, FL
Posts: 7,341
I have had bearding on a quilt using polyester batting. The quilt was comprised of darks and black on top and black on bottom. Utilizing black batting might have made it less noticeable. Possibly very tightly woven fabrics might have been the answer. Sure, one wants to be proactive in their planning, eh?
#28
Super Member
Join Date: Mar 2012
Location: Thornton, Colorado
Posts: 1,023
www.how-to-quilt.com/articles/3014-batting-bearding.php I researched the Internet after seeing all your comments. This link may answer some of your questions...other web sites may provide extra answers. I recently did a quilt with black print fabric used as sashing on the front and as the backing. I used 80/20 batting and there were no bearding problems. I have been using topstitch needles for FMG, if this does make a difference.
#30
Power Poster
Join Date: Mar 2013
Location: Corpus Christi, Tx.
Posts: 16,105
Can't help here! Don't use wool because of allergies to it. Makes me itch. What about taking a vacuum sweeper to get the excess fibers out. When I do have to use wool, I prewash the material on gentle and toss in the dryer on low and use couple dryer sheets. I prefer light weight flannel or light loft for my quilts.
Thread
Thread Starter
Forum
Replies
Last Post