Bradley Ultra Quilter?
12-07-2013, 06:08 PM
#12
Super Member
Thread Starter
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
I found a couple sites that have them for sale if you google. Here's one http://www.sewingmachinesplus.com/brad-ultraq.php
I don't know if it's less expensive to order direct from the manufacturer?
I don't know if it's less expensive to order direct from the manufacturer?
08-21-2016, 01:57 PM
#13
Member
Join Date: Aug 2016
Location: HOUSTON, TEXAS
Posts: 2
I have a Bradley Ultra Quilter 8ft table for sale. It also have Ott work light, speed control, and Juki TL-98Q. i have boards to cover the tracks so that you can use the table as a work space and handles installed on the carriage. I'm asking $700.00 OBO for the entire setup. Pick up please.
08-22-2016, 03:54 AM
#16
Super Member
Join Date: Nov 2010
Posts: 1,538
Candace, I've had mine for years and I use a Juki with it. I have done mostly lap size or twin size quilts on it with no problems. I did a few larger king size quilts using the split and sew method and it worked fine. Do you have the speed control thing. That works really well also.
08-22-2016, 10:55 AM
#18
Member
Join Date: Aug 2016
Location: HOUSTON, TEXAS
Posts: 2
Candace, I've had mine for years and I use a Juki with it. I have done mostly lap size or twin size quilts on it with no problems. I did a few larger king size quilts using the split and sew method and it worked fine. Do you have the speed control thing. That works really well also.
08-24-2016, 10:14 AM
#19
Member
Join Date: Jul 2014
Posts: 3
Dear Candace, I just joined this website and saw your message about the Bradley Ultra Quilter. I have one and have been very frustrated. The problems I am having are more than likely due my inexperience in quilting. I have a severe thread breakage problem. My machine is Juki 2010 and is not the problem, I am sure. Any suggestions or tips on using this set up? I think my thread breaks from hitting the front pole with the quilt on it.
05-31-2019, 07:27 AM
#20
Member
Join Date: May 2019
Posts: 1
I just received a frame and Juki. My thread and needle keep breaking. I took the machine in and after spending nearly $300 to tune the machine it still has the same problem. The repair man is no help. He says it is the quilting set up, not the machine. Tried to contact Bradley but they are gone, gone gone. I feel like I am stuck with this setup that does not work
Thread
Thread Starter
Forum
Replies
Last Post
