Suggestions for used sewing machine
#21
Member
Thread Starter
Join Date: Feb 2017
Posts: 21
Thanks for all the suggestions. I am keeping a list.
Miriam, Since you repair, do you have a recommendation for a machine? Looking for a good, fairly basic, portable, mechanical (I think?), reliable machine with a sturdy base and a front surface piece. I don't really like not having an extra surface in front. My dad can repair the mechanical machines, that's why I am looking at goodwill as well as everywhere else. Any underrated ones that would be less expensive? I'd rather find one that is under 45 years old or so.
Thanks for all the help!!
Miriam, Since you repair, do you have a recommendation for a machine? Looking for a good, fairly basic, portable, mechanical (I think?), reliable machine with a sturdy base and a front surface piece. I don't really like not having an extra surface in front. My dad can repair the mechanical machines, that's why I am looking at goodwill as well as everywhere else. Any underrated ones that would be less expensive? I'd rather find one that is under 45 years old or so.
Thanks for all the help!!
#22
Senior Member
Join Date: Sep 2011
Location: Central NY
Posts: 859
I'm in CNY, so too far for you. I have a 1530 and a 1540. They are basically the same machine but the 1530 does not have a threader. Both have the IDT, which is a built-in walking foot. This works very well, is easy to engage, and there are many feet to use with it. (Incidentally, Janome and Bernina also have some machines with a built-in walking foot, by various names, but none can compare to the original Pfaff. The Bernina is only on their upper level machines and does NOT work as well. They even suggest that for quilting one use their walking foot [$140-$200 extra]. The Janome works well, but is very difficult to install, and each foot change requires a complete change of screw in foot, not just the bottom snap in part. But I digress....) These Pfaff work well, but are, I guess "lower level"
I also have two 6270 (my favorites), what I call more, "mid=level". There are several others (6250, plus others) with fewer features, but also computerized. I have several newer machines, Bernina and Janome, but none gives me the precise piecing that these Pfaff machines do, and I don't need a ss plate or special foot. I also have a 7530, and a 1222, which I don't care for. All my machines have the IDT. Pfaff made many machines with the IDT and many without, you just have to look at each machine, or ask on here....someone might know. If you have a good photo of the foot at an angle it will be obvious. The 875 does not have it.
Re: the Janome dual feed, my hands are old, arthritic and knarly......folks with better hands might not have the trouble installing the feet that I do. They work well, but are too clunky to do 1/4" accurately, IMHO.
Any more questions?
[QUOTE=Coodoo;7762250]Thanks, I'm in Central New Jersey.
Wintersewer, can you tell me some of the Pfaff models that you like? I was looking for a mid-line model Pfaff... 875?
Can you explain IDT?
I also have two 6270 (my favorites), what I call more, "mid=level". There are several others (6250, plus others) with fewer features, but also computerized. I have several newer machines, Bernina and Janome, but none gives me the precise piecing that these Pfaff machines do, and I don't need a ss plate or special foot. I also have a 7530, and a 1222, which I don't care for. All my machines have the IDT. Pfaff made many machines with the IDT and many without, you just have to look at each machine, or ask on here....someone might know. If you have a good photo of the foot at an angle it will be obvious. The 875 does not have it.
Re: the Janome dual feed, my hands are old, arthritic and knarly......folks with better hands might not have the trouble installing the feet that I do. They work well, but are too clunky to do 1/4" accurately, IMHO.
Any more questions?
[QUOTE=Coodoo;7762250]Thanks, I'm in Central New Jersey.
Wintersewer, can you tell me some of the Pfaff models that you like? I was looking for a mid-line model Pfaff... 875?
Can you explain IDT?
#23
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I have a lot of old machines I love. Singers are most common. There are some nice, simple, mechanical non plastic camstack old Japanese machines on either one I like the cams. If you get lucky you can find an old European machine. They are harder to work on than the Japanese or Singer machines. Stay away from plastic wonders - computerized or not. I do like the older Kenmore machines. A good 1980's Kenmore 6, 8, 10 or 12 stitchers are usually good and not too pricy at this point. They are plastic but don't have a lot,of issues. The more complicated the less I like them. Kenmore's with bigger numbers are nice but I've had issues with reverse sticking.
#26
Not Hobbymatics
Among the Pfaffs, Hobbymatics are considered a secondary line, and they don't hold up as well as the first string Pfaffs, though others might disagree. I have a Pfaff Creative and an old Pfaff 360 that I love, but I wouldn't buy a Hobby.
#28
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,474
I am very fond of my Pfaff 1471 . It is comparatively lightweight for carrying.
I am also fond of the Singer 237 - i think it is an early 1960s model. It has forward and reverse , three needle positions, and zigzag. It can handle heavy weight denim. However, it is quite heavy. It is a plain jane machine, but also easy to operate.
As far S i know, any of the mechanical Berninas whose model number ends with 30 is apt to be a good machine.
I am also fond of the Singer 237 - i think it is an early 1960s model. It has forward and reverse , three needle positions, and zigzag. It can handle heavy weight denim. However, it is quite heavy. It is a plain jane machine, but also easy to operate.
As far S i know, any of the mechanical Berninas whose model number ends with 30 is apt to be a good machine.
#29
Senior Member
Join Date: Sep 2011
Location: Central NY
Posts: 859
I'm not sure you're correct about that. If it has the IDT, I think it's considered, "first string". Maybe someone who really knows will chime in here. Or you could join the Pfaff Yahoo group and ask there.
#30
Member
Thread Starter
Join Date: Feb 2017
Posts: 21
I have a lot of old machines I love. Singers are most common. There are some nice, simple, mechanical non plastic camstack old Japanese machines on either one I like the cams. If you get lucky you can find an old European machine. They are harder to work on than the Japanese or Singer machines. Stay away from plastic wonders - computerized or not. I do like the older Kenmore machines. A good 1980's Kenmore 6, 8, 10 or 12 stitchers are usually good and not too pricy at this point. They are plastic but don't have a lot,of issues. The more complicated the less I like them. Kenmore's with bigger numbers are nice but I've had issues with reverse sticking.
https://www.shopgoodwill.com/auction...-37048382.html
I can't determine if it was made in Japan.
Thread
Thread Starter
Forum
Replies
Last Post
jmabby
For Vintage & Antique Machine Enthusiasts
4
05-04-2015 02:12 PM
dyer804
Pictures
53
02-12-2011 12:42 PM